Ceilings

View as Grid List
Sort by
Display per page

TOOLPRO 05015 Eye Lag Screw, Carbon Steel, Zinc, 100 Package, Pack

Eye lag screws screw into wood ceiling joists to attach hanger wire for suspended ceilings. An eye lag screw is fashioned with an eye for threading the hanger wire and a lag thread on the other end for securing in the wood. Pre-drilling is recommended for the strongest attachment.
$12.99

TOOLPRO 05122 Ceiling Wire, Galvanized Steel

Hanger wire is used to suspend ceiling grid main tees from the overhead structure. Designed for residential applications. The continuous 300 ft roll lets you cut the lengths you want with no waste.
$12.99

TOOLPRO 5010 Eye Lag Screw, Carbon Steel, Zinc, 20 Package, Pack

Eye lag screws are specifically designed for attaching ceiling grid hanger wire to any wood overhead. The hanger wire is threaded through the eye and twisted off before or after the eye lag screw is installed. Pre-drilling is recommended for the strongest attachment.
$3.99

TOOLPRO TP05032 Eye Lag Driver, 2 Package, Pack

This heavy-duty tool easily installs eye lag screws up to 4-1/2 in. long as well as self-tapping eye lags screws for metal. Overall length is 2.7 in and will fit any standard size chuck. Use with any drill or driver.
$10.99

TOOLPRO TP05044 Ceiling Grid Clamp, Plastic, 4 Package, Pack

Lever action grid clamps temporarily connect ceiling grid and firmly hold leveling line during the layout process. Each clamp is made from spring steel and is easy to operate with a single hand. Rubber tips on the clamps hold the grid and leveling line firmly in place without damaging the grid finish.
$8.99

TOOLPRO TP05060 Grid Punch

This grid punch is the most reliable and economical tool for preparing non-standard lengths of ceiling grid for fastening with rivets. Hardened pin will easily pierce 18 ga steel with little effort, allowing one-hand operation while freeing the other hand to hold the material steady. The tool's thin profile and deep throat makes punching holes into awkward and hard to reach corners possible. For optimum results place the steel cup firmly against the back of the material to be punched and squeeze with consistent pressure, bringing the pin into the material. The rubber tip on the punch will protect painted or coated finishes from being marred.
$31.99

TOOLPRO TP05110 Edge Cutter, Steel

The Shadowline cutter creates ideal Shadowline or reveal edges on ceiling tiles and acoustical panels. The one-piece all-steel design is comfortable to hold and use. This contractor-proven tool will not only make the most professional looking cuts possible. It will pay for itself on the first day by eliminating wasted tiles due to bad cuts. Blade changes and cutting depth are easily adjusted by hand with no additional tools required.
$12.99

USG 4240 Ceiling Tile, 12 in L, 12 in W, Tivoli Pattern, Staple Flange Edge, Wood

Low-cost, wood fiber panels that are ideal when fire resistance, acoustical performance and accessibility are not significant considerations; offers simple staple-up installation that does not require a grid; tongue-and-groove edging on the tiles hides staples, delivering a smooth, clean, monolithic look; retail equivalent of Armstrong's Grenoble 258. 12 in x 12 in x 1/2 in with Staple Flange.
$42.99

USG 4260 Ceiling Tile, 12 in L, 12 in W, Lace Pattern, Staple Flange Edge, Wood

Economical, wood fiber panels that are the ideal solution when fire resistance, acoustical performance and accessibility are not significant considerations; tongue-and-groove edging on the tiles hides staples for a smooth, clean, monolithic look; installs easily with staples; a grid is not required; retail equivalent of Armstrong's Chaperone 255. 12 in x 12 in x 1/2 in with Staple Flange.
$59.99

USG 4270 Ceiling Tile, 12 in L, 12 in W, Orleans Pattern, Staple Flange Edge, Wood

Economical, wood fiber panels that are the ideal solution when fire resistance, acoustical performance and accessibility are not significant considerations; tongue-and-groove edging on the tiles hides staples for a smooth, clean, monolithic look; installs easily with staples; a grid is not required; retail equivalent of Armstrong's Pinehurst 250. 12 in x 12 in x 1/2 in with Staple Flange.
$44.99

USG 4290 Ceiling Tile, 12 in L, 12 in W, Custom Pattern, Staple Flange Edge, Wood, White

Low-cost, wood fiber panels; the ideal choice when fire resistance, acoustical performance and accessibility are not significant considerations; tongue-and-groove edging on the tiles hides staples for a smooth, clean, monolithic look; offers easy, staple-up installation without a grid; retail equivalent of Armstrong's Washable White 231. 12 in x 12 in x 1/2 in with Staple Flange.
$47.99

USG DONN SDX/SDXL SDKL24 Main Tee, Galvanized Steel, Flat White

DONN® SDX®/SDXL™ Acoustical suspension system has its own worth dictated in its economic and versatile approach. It has gained excellence over others on the industry for its simple installation, pocket friendly rates and ability to resist corrosion for quality performance.
$7.99

USG DONN SDX/SDXL SDX/SDXL216 Cross Tee, Galvanized Steel, Flat White

DONN® SDX®/SDXL™ Acoustical suspension system has its own worth dictated in its economic and versatile approach. It has gained excellence over others on the industry for its simple installation, pocket friendly rates and ability to resist corrosion for quality performance.
$1.99

USG DONN SDX/SDXL SDX/SDXL424 Cross Tee, Galvanized Steel, Flat White

DONN® SDX®/SDXL™ Acoustical suspension system has its own worth dictated in its economic and versatile approach. It has gained excellence over others on the industry for its simple installation, pocket friendly rates and ability to resist corrosion for quality performance.
$2.99

USG DONN SDX/SDXL SM7 Wall Molding, Galvanized Steel, Flat White

DONN® SDX®/SDXL™ Acoustical suspension system has its own worth dictated in its economic and versatile approach. It has gained excellence over others on the industry for its simple installation, pocket friendly rates and ability to resist corrosion for quality performance.
$5.69

USG DONN SDX216 Cross Tee, Galvanized Steel, White

USG DONN Cross Tee, Galvanized Steel, White, Dimensions: 2 ft L x 1 in W
$1.99

USG FIFTH AVENUE 220 Ceiling Panel, 4 ft L, 2 ft W, 5/8 in Thick, Mineral Fiber, White

Excellent, all-purpose, economical panels manufactured with a water-felted manufacturing process that provides good acoustical properties. Cleans easily with a soft brush or vacuum. 2 ft x 4 ft x 5/8 in with a square edge.
$64.99

USG FIFTH AVENUE 270 Ceiling Panel, 2 ft L, 2 ft W, 5/8 in Thick, Mineral Fiber, White

All-purpose, economical panels manufactured with a water-felted manufacturing process that provides good acoustical properties. They clean easily with a soft brush or vacuum. Panels are ideal for classrooms, hallways and offices. 2 ft x 2 ft x 5/8 in. 64 sq-ft per box.
$64.99

USG FIFTH AVENUE 280 Ceiling Panel, 4 ft L, 2 ft W, 5/8 in Thick, Mineral Fiber, White

Excellent, all-purpose, economical panels manufactured with a water-felted manufacturing process that provides good acoustical properties. Cleans easily with a soft brush or vacuum. 2 ft x 4 ft x 5/8 in with a square edge.
$39.99

USG Luna Pedestals IV CLIMAPLUS R72716 Ceiling Panel, 2 ft L, 2 ft W, 3/4 in Thick, Mineral Fiber, White

Luna acoustical ceiling panels are long-lasting, fine-textured acoustical panels. Face scores create the illusion of a smaller-scaled ceiling system - the look of four 12 x 12 in tiles with triple-step scoring on the edges. Provide a solid sound performance that meet the general office acoustical needs for sound absorption. Panels include CLIMAPLUS performance to resist visible sag and protect against growth of mold and mildew. 2 ft x 2 ft x 3/4 in.
$139.99

USG PLATEAU 725 Ceiling Panel, 4 ft L, 2 ft W, 9/16 in Thick, Mineral Fiber, White

Provides an attractive way to finish a ceiling. The mineral fiber panels have a square edge design for quick installation. A high light reflectance value. Cleans easily with a soft brush or vacuum. 2 ft x 4 ft x 9/16 in with a square edge.
$45.99

USG RADAR R2120 Ceiling Panel, 2 ft L, 2 ft W, 5/8 in Thick, Mineral Fiber, White

Economical, medium-textured panels that feature a unique, non-directional pattern. They are made with a water-felted manufacturing process that provides excellent ceiling attenuation class (CAC) performance. Installs quickly and easily and are classified as low-emitting ceiling panels. 2 ft x 4 ft x 5/8 in.
$64.99

USG RADAR R2310/290 Ceiling Panel, 4 ft L, 2 ft W, 5/8 in Thick, Fiberboard, White

Economical, medium-textured panels that feature a unique, non-directional pattern. They are made with a water-felted manufacturing process that provides excellent ceiling attenuation class (CAC) performance. Installs quickly and easily and are classified as low-emitting ceiling panels. 2 ft x 4 ft x 5/8 in.
$42.99

USG RADAR R2315 Ceiling Panel, 2 ft L, 2 ft W, 5/8 in Thick, Fiberboard, White

Economical, medium-textured panels that feature a unique, non-directional pattern. They are made with a water-felted manufacturing process that provides excellent ceiling attenuation class (CAC) performance. Installs quickly and easily and are classified as low-emitting ceiling panels. 2 ft x 4 ft x 5/8 in.
$64.99

USG RADAR R2742 Ceiling Panel, 4 ft L, 2 ft W, 3/4 in Thick, Fiberboard, White/Beige/Gray

Face scores create the illusion of smaller-scaled ceiling system - the look of two 2 x 2 ft panels form one 2 x 4 ft panel. Non-directional pattern with a fresh, clean appearance offers fast and efficient installation. Economical, all-purpose ceiling pattern. 2 ft x 4 ft x 3/4 in. 48 sq-ft per carton coverage.
$47.99

USG TABARET CLIMAPLUS 209 Ceiling Panel, 2 ft L, 4 ft W, 5/8 in Thick, Fiberglass/Vinyl, White

TABARET acoustical ceiling panels are medium-textured, fiberglass panels with a washable vinyl face for easy maintenance. Offers sound control performance by providing high sound absorption. Lightweight, fiberglass basemat makes installation fast and easy. Panels include CLIMAPLUS performance to resist visible sag and protect against growth of mold and mildew. 2 ft x 4 ft x 5/8 in.
$139.99
;