Chimney Pipe Fittings

View as Grid List
Sort by
Display per page

AmeriVent 6SWA Single Wall Adapter, Stainless Steel

Included in ceiling support assembly, roof support assembly and tee assembly.
$17.99

AmeriVent 8HS-030 Elbow Set

For use in pairs to permit chimney to go around in joists, rafters or other projections. Add chimney section between offsets to produce additional offset.
$379.99

AmeriVent 8SWA Single Wall Adapter, Stainless Steel

Included in ceiling support assembly, roof support assembly and tee assembly.
$21.99

Imperial GV0931 Chimney Thimble, 28 Gauge, Galvanized Steel, Galvanized

Imperial Chimney Thimble, 28 ga, Galvanized, 6 x 6 in Dimensions, For: Tee Branch and Chimney Section
$5.99

Imperial GV0939 Chimney Thimble, 28 Gauge, Galvanized Steel, Galvanized

Imperial Chimney Thimble, 28 ga, Galvanized, 8 x 6 in Dimensions, For: Tee Branch and Chimney Section
$8.99

SELKIRK 206100 Insulated Chimney Tee with Cap, 6-1/4 in Connection, Stainless Steel

Used to start chimneys indoors or outdoors using a wall support assembly or a masonry pier. A length of insulated chimney pipe is attached to the tee snout, using a Locking Band, to pass safely through combustible walls. An insulated tee cap is included which can be removed from bottom opening for inspection and cleanout. Maximum height of chimney which can be supported by an insulated tee is 50 ft.
$169.99

SELKIRK 206206 Type HT Insulated Elbow Kit

Can be used for fixed offsets of 15 deg slope or in pairs for offsets adjustable from zero to 30 deg slope. Greater angles are prohibited by UL standard 103 and by the terms of the product listing. Required locking bands (2 packaged with each elbow kit) allow 360 deg rotation and lock the components together in place at the exact offset required. Insulated elbows can be used at the same 2 in air space clearance as chimney sections. Includes 2 elbows, 2 locking bands and interior resupport.
$199.99

SELKIRK 206211 Type HT Insulated Elbow Kit

Can be used for fixed offsets of 30 deg slope. Greater angles are prohibited by UL Standard 103 and by the terms of the product listing. Required Locking bands (2 packaged with each elbow kit) are to be used at each joint. Each offset must be resupported. Elbows rotate 360 deg to provide the exact orientation required. Insulated elbows can be used at the same 2 ft air space clearance as chimney sections. Kit includes 2 elbows, 2 locking bands and one interior resupport.
$249.99

SELKIRK 206240 Drip less Smoke Stove Pipe Adapter, 430 Stainless Steel

SELKIRK Stove Pipe Adapter, Drip less, Smoke, 6 in Nominal, 5-15/16 in Outside Diameter, 15-3/4 in Length, 430 Stainless Steel, Used to Connect Single Wall Stove Pipe to Selkirk Chimney Systems
$47.99

SELKIRK 208100 Insulated Chimney Tee with Cap, 7-3/8 in Connection, Stainless Steel

Used to start chimneys indoors or outdoors using a wall support assembly or a masonry pier. A length of insulated chimney pipe is attached to the Tee snout, using a locking band, to pass safely through combustible walls. An insulated tee cap is included which can be removed from bottom opening for inspection and cleanout. Maximum height of chimney which can be supported by an insulated Tee is 50 ft.
$199.99

SELKIRK 208242 Drip less Smoke Stove Pipe Adapter, 316 Stainless Steel

SELKIRK Stove Pipe Adapter, Drip less, Smoke, 8 in Nominal, 7-15/16 in Outside Diameter, 15-3/4 in Length, 316 Stainless Steel, Used to Connect Single Wall Stove Pipe to Selkirk Chimney Systems
$59.99

SELKIRK 243246 Chimney Adapter, Galvanized

Type L Pellet Vent to SELKIRK Insulated Chimney Adapters are for use in connecting a Model VP Vent System into an existing SELKIRK Chimney system.
$49.99

SELKIRK 243248 Chimney Adapter, Galvanized

Type L Pellet Vent to SELKIRK insulated chimney adapters are for use in connecting a Model VP vent system into an existing SELKIRK chimney system.
$57.99

SELKIRK DSP6IWT Insulated Wall Thimble, 28, 26 Gauge, Aluminized Steel

For installation to a masonry chimney through a combustible wall. Used to connect a single or double wall stove pipe to an existing masonry chimney or a relined masonry chimney with stainless steel liner.
$219.99

SELKIRK SuperVent 2100 Series JM6IT Chimney Tee

SELKIRK SuperVent 2100 Series Chimney Tee, 6 in Dia Dimensions, Includes: Insulated Tee Plug
$9.99

SELKIRK Sure-Temp 206463 Insulated Wall Thimble

Sure-Temp Wall Thimble, Insulated, 6 in Nominal, 19 in Outside Diameter, Framing Dimensions: 16 X 16 in, 6 - 11 in Wall Thickness, 11-1/8 X 11-1/8 in Opening
$54.99
;