Concrete Additives & Bonders

View as Grid List
Sort by
Display per page
Filter by attributes

DAMTITE 05160 Bonding Additive, Liquid, Ammonia, 1 qt Bottle

A high-solid, water-resistant, acrylic resin designed as an admixture for thin Portland cement coatings, concrete repair/resurface powder mixes, thin set mortar, tile grout, plaster and stucco. It improves the adhesion, durability and resistance to chemicals and acid by reducing the surface permeability. Excellent additive to DAMTITE powder waterproofers, thin-set cements, grouts and packaged concrete mixes. Ideal to improve the adhesion of coatings over smooth non-porous surfaces, like poured concrete, glazed tile and sandstone. Prevents separation and cracking, increases cohesion, tensile, compressive and flexural strength. Will not yellow or discolor the coating.
$21.99

DAMTITE 05500 Bonding Additive, Liquid, Ammonia, 5 gal Pail

A high-solid, water-resistant, acrylic resin designed as an admixture for thin Portland cement coatings, concrete repair/resurface powder mixes, thin set mortar, tile grout, plaster and stucco. It improves the adhesion, durability and resistance to chemicals and acid by reducing the surface permeability. Excellent additive to DAMTITE powder waterproofers, thin-set cements, grouts and packaged concrete mixes. Ideal to improve the adhesion of coatings over smooth non-porous surfaces, like poured concrete, glazed tile and sandstone. Prevents separation and cracking, increases cohesion, tensile, compressive and flexural strength. Will not yellow or discolor the coating.
$129.99

DAMTITE 05610 Primer Adhesive, Liquid, Ammonia, 1 gal Bottle

A very high-solid, water-resistant, acrylic resin, designed as a paint-on primer coat or additive to powder mixes, to permanently bond new concrete, plaster, stone, brick, tile, masonry and stucco to existing surfaces of same or similar materials. It improves the adhesion, durability and resistance to chemicals and acid by reducing the surface permeability. Ideal primer before applying thin Portland cement coatings, concrete repair/resurface powder mixes, thin-set mortar, grouts or packaged concrete mixes. Significantly improves the chemical bond over smooth non-porous surfaces, like poured concrete, glazed tile and sandstone surfaces. Prevents separation and cracking, increases cohesion, tensile, compressive and flexural strength. Eliminates need for chipping, drilling or roughening existing surfaces before applying new topping.
$39.99

DAMTITE 05650 Primer Adhesive, Liquid, Ammonia, 5 gal Pail

A very high-solid, water-resistant, acrylic resin, designed as a paint-on primer coat or additive to powder mixes, to permanently bond new concrete, plaster, stone, brick, tile, masonry and stucco to existing surfaces of same or similar materials. It improves the adhesion, durability and resistance to chemicals and acid by reducing the surface permeability. Ideal primer before applying thin Portland cement coatings, concrete repair/resurface powder mixes, thin-set mortar, grouts or packaged concrete mixes. Significantly improves the chemical bond over smooth non-porous surfaces, like poured concrete, glazed tile and sandstone surfaces. Prevents separation and cracking, increases cohesion, tensile, compressive and flexural strength. Eliminates need for chipping, drilling or roughening existing surfaces before applying new topping.
$149.99

DAP 35082 Floor Leveler Additive, Liquid, 1 pt Bottle

DAP??/Bondex?? bonding liquid and floor leveler additive is a versatile product that can be used as a "glue" to bond new concrete to old and as an additive to increase adhesion and flexibility in plaster, mortar, concrete, floor leveler, stucco and waterproof cement paint.
$9.99

DAP 35090 Floor Leveler Additive, Liquid, 1 gal Bottle

DAP??/Bondex?? bonding liquid and floor leveler additive is a versatile product that can be used as a "glue" to bond new concrete to old and as an additive to increase adhesion and flexibility in plaster, mortar, concrete, floor leveler, stucco and waterproof cement paint.
$32.99

Elmers E862 Concrete Bonder, Liquid, 1 qt Bottle

Elmer's ProBond concrete bonder is a professional strength adhesion promoter that enhances the performance of materials like cement, stucco and plaster. Whether your project is made for the indoors or outdoors, using ProBond concrete bonder will help fortify the bonds between layers of cement, stucco or plaster. It may be brushed onto existing surfaces or added to concrete mix to improve strength and adhesion. Our formula is available in 1 qt bottles.
$12.99

Larsen Plaster-Weld PWG04 Bonding Agent, Liquid, Low to Slight Acetic, 1 gal Pail

Bonds new plaster to any clean, structurally sound, interior surface. High-performance bonding of one-coat finish plaster and/or two and three coat work to concrete ceilings, walls, columns, beams and other structurally sound surfaces. Prepares the surface to allow you to plaster directly to concrete over electric radiant heat cable and to bond cement mortar beds to smooth concrete for installation of rigid foam insulation. Can be used over paints having oil, rubber or vinyl bases and over silicone-treated surfaces as well as latex paints. Covers approximately 300 to 400 sq-ft/gal depending on method of application, temperatures, porosity and texture of the substrate. Pink and non-bleeding.
$29.99

Larsen Plaster-Weld PWP05 Bonding Agent, Liquid, Low to Slight Acetic, 5 gal Pail

Bonds new plaster to any clean, structurally sound, interior surface. High-performance bonding of one-coat finish plaster and/or two and three coat work to concrete ceilings, walls, columns, beams and other structurally sound surfaces. Prepares the surface to allow you to plaster directly to concrete over electric radiant heat cable and to bond cement mortar beds to smooth concrete for installation of rigid foam insulation. Can be used over paints having oil, rubber or vinyl bases and over silicone-treated surfaces as well as latex paints. Covers approximately 300 to 400 sq-ft/gal depending on method of application, temperatures, porosity and texture of the substrate. Pink and non-bleeding.
$149.99

Larsen Plaster-Weld PWQ06 Bonding Agent, Liquid, Low to Slight Acetic, 1 qt Pail

Bonds new plaster to any clean, structurally sound, interior surface. High-performance bonding of one-coat finish plaster and/or two and three coat work to concrete ceilings, walls, columns, beams and other structurally sound surfaces. Prepares the surface to allow you to plaster directly to concrete over electric radiant heat cable and to bond cement mortar beds to smooth concrete for installation of rigid foam insulation. Can be used over paints having oil, rubber or vinyl bases and over silicone-treated surfaces as well as latex paints. Covers approximately 300 to 400 sq-ft/gal depending on method of application, temperatures, porosity and texture of the substrate. Pink and non-bleeding.
$13.99

Larsen Weld-Crete WCG04 Bonding Agent, Liquid, Low to Slight Acetic, 1 gal Pail

Bonds new concrete, stucco, tile setting beds and terrazzo to any structurally sound surface. Also used for bonding setting beds for ceramic tile, bonding Portland cement plaster and stucco mixes and to bond to surfaces such as brick, block, tile, marble, metal, glass block, soundly adhered paint and silicone. Incorporates polyvinyl acetate homopolymer in a patented formulation. Can be painted on in a single application 1 hr to 10 days prior to concrete placement. ASTM C-932 tensile bond strength. ASTM C-78 flexural bond strength. ASTM C-1042 shear bond strength. ASTM C-109 temperature range. Covers approximately 200 to 300 sq-ft/gal depending on method of application, temperatures, porosity and texture of the substrate. Blue and non-bleeding.
$34.99

Larsen Weld-Crete WCP05 Bonding Agent, Liquid, Low to Slight Acetic, 5 gal Pail

Bonds new concrete, stucco, tile setting beds and terrazzo to any structurally sound surface. Also used for bonding setting beds for ceramic tile, bonding Portland cement plaster and stucco mixes and to bond to surfaces such as brick, block, tile, marble, metal, glass block, soundly adhered paint and silicone. Incorporates polyvinyl acetate homopolymer in a patented formulation. Can be painted on in a single application 1 hr to 10 days prior to concrete placement. ASTM C-932 tensile bond strength. ASTM C-78 flexural bond strength. ASTM C-1042 shear bond strength. ASTM C-109 temperature range. Covers approximately 200 to 300 sq-ft/gal depending on method of application, temperatures, porosity and texture of the substrate. Blue and non-bleeding.
$159.99

Larsen Weld-Crete WCQ06 Bonding Agent, Liquid, Low to Slight Acetic, 1 qt Pail

Bonds new concrete, stucco, tile setting beds and terrazzo to any structurally sound surface. Also used for bonding setting beds for ceramic tile, bonding Portland cement plaster and stucco mixes and to bond to surfaces such as brick, block, tile, marble, metal, glass block, soundly adhered paint and silicone. Incorporates polyvinyl acetate homopolymer in a patented formulation. Can be painted on in a single application 1 hr to 10 days prior to concrete placement. ASTM C-932 tensile bond strength. ASTM C-78 flexural bond strength. ASTM C-1042 shear bond strength. ASTM C-109 temperature range. Covers approximately 200 to 300 sq-ft/gal depending on method of application, temperatures, porosity and texture of the substrate. Blue and non-bleeding.
$13.99

Quikrete 1905-01 Winter Concrete Mix, Liquid, 1 gal Bottle

Quikrete?? Thermo-Lube is an accelerating admixture liquid for concrete and mortar in cold weather, hastening the hydration of Portland cement which enables the cement to harden before freezing.
$9.99

Quikrete 9902-01 Bonding Adhesive, Liquid, Vinyl Acetate, 1 gal Bottle

Quikrete?? concrete bonding adhesive is specifically formulated for permanently bonding new concrete or plaster to old concrete or plaster. It is suitable for interior or exterior applications. Quikrete?? concrete bonding adhesive is also used as the required primer for Quikrete?? self leveling floor resurfacer.
$16.99

Quikrete 9902-14 Bonding Adhesive, Liquid, Vinyl Acetate, 1 qt Bottle

Quikrete?? concrete bonding adhesive is specifically formulated for permanently bonding new concrete or plaster to old concrete or plaster. It is suitable for interior or exterior applications. Quikrete?? concrete bonding adhesive is also used as the required primer for Quikrete?? self leveling floor resurfacer.
$8.69

SikaLatex R 187782 Bonding Additive, Liquid, Ammonia, 1 gal Jug

A non-reemulsifiable bonding adhesive and fortifier. Improves the bond between old concrete and new concrete and as a fortifier, improves strength, adhesion and durability.
$12.99

SikaLatex R 471643 Bonding Adhesive, Liquid, Ammonia, 1 qt Jug

A non-reemulsifiable bonding adhesive and fortifier. Improves the bond between old concrete and new concrete and as a fortifier, improves strength, adhesion and durability.
$7.99