Filter by:

Clear All

CPVC Pipe Elbows

View as Grid List
Sort by
Display per page

GENOVA 500 50605 Slip Elbow, 1/2 in, Slip-Joint x Slip, 45 deg Angle, CPVC, 400 psi Pressure

Used to change direction in piping. Sometimes used in conjunction with a 12 in L CPVC tubing on long runs to absorb expansion. Bagged.
$0.49

GENOVA 500 50607 Slip Elbow, 3/4 in, Slip-Joint x Slip, 45 deg Angle, CPVC, 400 psi Pressure

Used to change direction in piping. Sometimes used in conjunction with a 12 in L CPVC tubing on long runs to absorb expansion. Bagged.
$0.79

GENOVA 500 50705 Slip Elbow, 1/2 in, Slip-Joint x Slip, 90 deg Angle, CPVC, 400 psi Pressure

GENOVA 500 Slip Elbow, Nominal Size: 1/2 in, Slip-Joint x Slip Connection, Angle: 90 deg, 400 psi, Operating Temperature: 73 deg F, CPVC, Suitable for: Water Meter and Fixtures
$0.29

GENOVA 500 50707 Slip Elbow, 3/4 in, Slip-Joint x Slip, 90 deg Angle, CPVC, 400 psi Pressure

GENOVA 500 Slip Elbow, Nominal Size: 3/4 in, Slip-Joint x Slip Connection, Angle: 90 deg, 400 psi, Operating Temperature: 73 deg F, CPVC, Suitable for: Water Meter and Fixtures
$0.59

GENOVA 500 50710 Slip Elbow, 1 in, Slip-Joint x Slip, 90 deg Angle, CPVC, 400 psi Pressure

GENOVA 500 Slip Elbow, Nominal Size: 1 in, Slip-Joint x Slip Connection, Angle: 90 deg, 400 psi, Operating Temperature: 73 deg F, CPVC, Suitable for: Water Meter and Fixtures
$1.99

GENOVA 500 52705 Street Elbow, 1/2 in, Slip-Joint x Spigot, 45 deg Angle, CPVC, 400 psi Pressure

Used on close offsets where very short pieces of CPVC pipe would otherwise have to be used with conventional 45 deg elbows. A principal use is to offset piping over and around existing piping mounted on flat surfaces such as a wall or ceiling.
$0.79

GENOVA 500 52707 Street Elbow, 3/4 in, Slip-Joint x Spigot, 45 deg Angle, CPVC, 400 psi Pressure

Used on close offsets where very short pieces of CPVC pipe would otherwise have to be used with conventional 45 deg elbows. A principal use is to offset piping over and around existing piping mounted on flat surfaces such as a wall or ceiling.
$0.99

GENOVA 500 52905 Street Elbow, 1/2 in, Slip-Joint x Spigot, 90 deg Angle, CPVC, 400 psi Pressure

Used to change direction in piping from a fitting socket. Also used in conjunction with a conventional CPVC 90 deg elbow to fabricate a change of direction of piping at any angle.
$0.39

GENOVA 500 52907 Street Elbow, 3/4 in, Slip-Joint x Spigot, 90 deg Angle, CPVC, 400 psi Pressure

Used to change direction in piping from a fitting socket. Also used in conjunction with a conventional CPVC 90 deg elbow to fabricate a change of direction of piping at any angle.
$0.79

GENOVA 500 53055 Wing Elbow, 1/2 in, Slip-Joint x FIP, 90 deg Angle, CPVC, 400 psi Pressure

Adapts from 1/2 in CPVC to 1/2 in male metal pipe thread and features lugs for fastening. Used on tub and shower faucets to adapt from 1/2 in CPVC riser to shower arm. Sometimes called a drop ear elbow. Hand tighten only, seals by means of a special elastomeric gasket to ensure leak-proof seal, use of joint compound or Teflon tape is neither necessary or recommended.
$1.39

GENOVA 500 53056 Slip Wing Elbow, 1/2 in, Slip-Joint x Slip, 90 deg Angle, CPVC, 400 psi Pressure

Used to change direction in piping and features lugs for fastening. Often used in conjunction with No. 530671 washer hose valve for hooking up to automatic clothes washers and for fabricating water supply piping stub outs for toilet installation. Sometimes called a drop ear elbow.
$0.89

GENOVA 500 53071Z Pipe Elbow, 1/2 in, Slip-Joint x FIP, 90 deg Angle, CPVC, 400 psi Pressure

Used to transition from metal male pipe threads to CPVC. Provides for rigid installation by mounting elbow to wall. Usually used for shower arm or washer hose valve installation.
$5.69
;