Filter by:

Clear All

CPVC Pipe Fittings

View as Grid List
Sort by
Display per page

AMERICAN VALVE P600CTS 1 Compression Coupler, 1 in, Compression, 150 psi Pressure

For use in general piping applications, using copper tube sized pipe. Easy to operate for instant emergency piping. Piping must be restrained.
$10.99

AMERICAN VALVE P600CTS 1/2 Compression Coupler, 1/2 in, Compression, 150 psi Pressure

For use in general piping applications, using copper tube sized pipe. Easy to operate for instant emergency piping. Piping must be restrained.
$2.99

B & K 160-203HC Compression Coupler, 1/2 in, Compression, 100 psi Pressure

CPVC body, nut, rubber gaskets, rated at 100 psi up to 180 deg F. Pipe must be restrained after installation, Use in piping or repairs on copper or plastic pipe. NSF approved.
$3.79

B & K 160-204HC Compression Coupler, 3/4 in, Compression, 100 psi Pressure

CPVC body, nut, rubber gaskets, rated at 100 psi up to 180 deg F. Pipe must be restrained after installation, Use in piping or repairs on copper or plastic pipe. NSF approved.
$3.99

GENOVA 500 50305 Pipe Adapter, 1/2 in, Slip x FIP, CPVC, 100 psi Pressure

Used to adapt to male pipe threads to CPVC tubing. A special elastomeric gasket ensures a leak-proof seal. Hand tighten only. This fitting seals by means of a gasket.
$1.49

GENOVA 500 50307 Pipe Adapter, 3/4 in, Slip x FIP, CPVC, 100 psi Pressure

Used to adapt to male pipe threads to CPVC tubing. A special elastomeric gasket ensures a leak-proof seal. Hand tighten only. This fitting seals by means of a gasket.
$1.99

GENOVA 500 50310 Pipe Adapter, 1 in, Slip x FIP, CPVC, 100 psi Pressure

Used to adapt to male pipe threads to CPVC tubing. A special elastomeric gasket ensures a leak-proof seal. Hand tighten only. This fitting seals by means of a gasket.
$2.99

GENOVA 500 50405 Male Adapter, 1/2 in, MIP x Slip, CPVC, 100 psi Pressure

Used to adapt female pipe threads to CPVC tubing in cold water applications. Transition unions are recommended where hot water or changing water temperatures are likely to be encountered. PTFE thread tape is the accepted method of sealing pipe threads on CPVC fittings.
$0.49

GENOVA 500 50407 Male Adapter, 3/4 in, MIP x Slip, CPVC, 100 psi Pressure

Used to adapt female pipe threads to CPVC tubing in cold water applications. Transition unions are recommended where hot water or changing water temperatures are likely to be encountered. PTFE thread tape is the accepted method of sealing pipe threads on CPVC fittings.
$0.79

GENOVA 500 50410 Male Adapter, 1 in, MIP x Slip, CPVC, 100 psi Pressure

Used to adapt female pipe threads to CPVC tubing in cold water applications. Transition unions are recommended where hot water or changing water temperatures are likely to be encountered. PTFE thread tape is the accepted method of sealing pipe threads on CPVC fittings.
$2.99

GENOVA 500 50605 Slip Elbow, 1/2 in, Slip-Joint x Slip, 45 deg Angle, CPVC, 400 psi Pressure

Used to change direction in piping. Sometimes used in conjunction with a 12 in L CPVC tubing on long runs to absorb expansion. Bagged.
$0.49

GENOVA 500 50607 Slip Elbow, 3/4 in, Slip-Joint x Slip, 45 deg Angle, CPVC, 400 psi Pressure

Used to change direction in piping. Sometimes used in conjunction with a 12 in L CPVC tubing on long runs to absorb expansion. Bagged.
$0.79

GENOVA 500 50705 Slip Elbow, 1/2 in, Slip-Joint x Slip, 90 deg Angle, CPVC, 400 psi Pressure

GENOVA 500 Slip Elbow, Nominal Size: 1/2 in, Slip-Joint x Slip Connection, Angle: 90 deg, 400 psi, Operating Temperature: 73 deg F, CPVC, Suitable for: Water Meter and Fixtures
$0.29

GENOVA 500 50707 Slip Elbow, 3/4 in, Slip-Joint x Slip, 90 deg Angle, CPVC, 400 psi Pressure

GENOVA 500 Slip Elbow, Nominal Size: 3/4 in, Slip-Joint x Slip Connection, Angle: 90 deg, 400 psi, Operating Temperature: 73 deg F, CPVC, Suitable for: Water Meter and Fixtures
$0.59

GENOVA 500 50710 Slip Elbow, 1 in, Slip-Joint x Slip, 90 deg Angle, CPVC, 400 psi Pressure

GENOVA 500 Slip Elbow, Nominal Size: 1 in, Slip-Joint x Slip Connection, Angle: 90 deg, 400 psi, Operating Temperature: 73 deg F, CPVC, Suitable for: Water Meter and Fixtures
$1.99

GENOVA 500 51405 Tube Tee, 1/2 in, Slip x Slip-Joint, CPVC, 100 psi Pressure

GENOVA 500 Tube Tee, Nominal Size: 1/2 in, Slip x Slip-Joint Connection, 100 psi, Operating Temperature: 180 deg F, CPVC
$0.59

GENOVA 500 51407 Tube Tee, 3/4 in, Slip x Slip-Joint, CPVC, 100 psi Pressure

GENOVA 500 Tube Tee, Nominal Size: 3/4 in, Slip x Slip-Joint Connection, 100 psi, Operating Temperature: 180 deg F, CPVC
$0.99

GENOVA 500 51410 Tube Tee, 1 in, Slip x Slip-Joint, CPVC, 100 psi Pressure

GENOVA 500 Tube Tee, Nominal Size: 1 in, Slip x Slip-Joint Connection, 100 psi, Operating Temperature: 180 deg F, CPVC
$4.29

GENOVA 500 51471 Tube Tee, 3/4 x 1/2 in, Slip x Slip-Joint, CPVC, 100 psi Pressure

GENOVA 500 Tube Tee, Nominal Size: 3/4 x 1/2 in, Slip x Slip-Joint Connection, 100 psi, Operating Temperature: 180 deg F, CPVC
$1.19

GENOVA 500 51477 Tube Tee, 1 x 3/4 in, Slip x Slip-Joint, CPVC, 100 psi Pressure

GENOVA 500 Tube Tee, Nominal Size: 1 x 3/4 in, Slip x Slip-Joint Connection, 100 psi, Operating Temperature: 180 deg F, CPVC
$5.99

GENOVA 500 51577 PVC to CPVC Adapter Coupler, 3/4 in, Slip x Slip CTS, CPVC, 100 psi Pressure

GENOVA 500 PVC to CPVC Adapter Coupler, Nominal Size: 3/4 in, Slip x Slip CTS Connection, 100 psi, Operating Temperature: 180 deg F, CPVC
$1.99

GENOVA 500 52705 Street Elbow, 1/2 in, Slip-Joint x Spigot, 45 deg Angle, CPVC, 400 psi Pressure

Used on close offsets where very short pieces of CPVC pipe would otherwise have to be used with conventional 45 deg elbows. A principal use is to offset piping over and around existing piping mounted on flat surfaces such as a wall or ceiling.
$0.79

GENOVA 500 52707 Street Elbow, 3/4 in, Slip-Joint x Spigot, 45 deg Angle, CPVC, 400 psi Pressure

Used on close offsets where very short pieces of CPVC pipe would otherwise have to be used with conventional 45 deg elbows. A principal use is to offset piping over and around existing piping mounted on flat surfaces such as a wall or ceiling.
$0.99

GENOVA 500 52905 Street Elbow, 1/2 in, Slip-Joint x Spigot, 90 deg Angle, CPVC, 400 psi Pressure

Used to change direction in piping from a fitting socket. Also used in conjunction with a conventional CPVC 90 deg elbow to fabricate a change of direction of piping at any angle.
$0.39

GENOVA 500 52907 Street Elbow, 3/4 in, Slip-Joint x Spigot, 90 deg Angle, CPVC, 400 psi Pressure

Used to change direction in piping from a fitting socket. Also used in conjunction with a conventional CPVC 90 deg elbow to fabricate a change of direction of piping at any angle.
$0.79

GENOVA 500 53055 Wing Elbow, 1/2 in, Slip-Joint x FIP, 90 deg Angle, CPVC, 400 psi Pressure

Adapts from 1/2 in CPVC to 1/2 in male metal pipe thread and features lugs for fastening. Used on tub and shower faucets to adapt from 1/2 in CPVC riser to shower arm. Sometimes called a drop ear elbow. Hand tighten only, seals by means of a special elastomeric gasket to ensure leak-proof seal, use of joint compound or Teflon tape is neither necessary or recommended.
$1.39

GENOVA 500 53056 Slip Wing Elbow, 1/2 in, Slip-Joint x Slip, 90 deg Angle, CPVC, 400 psi Pressure

Used to change direction in piping and features lugs for fastening. Often used in conjunction with No. 530671 washer hose valve for hooking up to automatic clothes washers and for fabricating water supply piping stub outs for toilet installation. Sometimes called a drop ear elbow.
$0.89

GENOVA 500 53071Z Pipe Elbow, 1/2 in, Slip-Joint x FIP, 90 deg Angle, CPVC, 400 psi Pressure

Used to transition from metal male pipe threads to CPVC. Provides for rigid installation by mounting elbow to wall. Usually used for shower arm or washer hose valve installation.
$5.69

GENOVA 500 Series 50105 Tube Coupler, 1/2 in, Slip Joint, 100 psi Pressure

Used to join straight lengths of CPVC tubing.
$0.49

GENOVA 500 Series 50105CP Tube Coupler, 1/2 in Slip Joint

Used to join straight lengths of CPVC tubing.
$2.79

GENOVA 500 Series 50107 Tube Coupler, 3/4 in, Slip Joint, 100 psi Pressure

Used to join straight lengths of CPVC tubing.
$0.49

GENOVA 500 Series 50110 Tube Coupler, 1 in, Slip Joint, 100 psi Pressure

Used to join straight lengths of CPVC tubing.
$1.99

GENOVA 500 Series 50155 Tube Cap, 1/2 in, Slip Joint, 100 psi Pressure

Used to permanently or temporarily cap CPVC. Most often used in conjunction with short lengths of CPVC tubing to fabricate water hammer arrestors (air chambers) in the CPVC system. Bagged.
$0.39

GENOVA 500 Series 50157 Tube Cap, 3/4 in, Slip Joint, 100 psi Pressure

Used to permanently or temporarily cap CPVC. Most often used in conjunction with short lengths of CPVC tubing to fabricate water hammer arrestors (air chambers) in the CPVC system. Bagged.
$0.59

GENOVA 500 Series 50158 Tube Cap, 1 in, Slip Joint, 100 psi Pressure

Used to permanently or temporarily cap CPVC. Most often used in conjunction with short lengths of CPVC tubing to fabricate water hammer arrestors (air chambers) in the CPVC system. Bagged.
$1.39

GENOVA 500 Series 50175 Tube Coupler, 3/4 x 1/2 in, Slip Joint, 100 psi Pressure

Used to join straight lengths of CPVC tubing to smaller size tubing.
$0.59

GENOVA 500 Series 50217 Pipe Bushing, 1 x 3/4 in, Spigot x Slip, 100 to 400 psi Pressure

Used to reduce from fitting socket to CPVC tubing. Bagged.
$1.69

GENOVA 500 Series 50275 Pipe Bushing, 3/4 x 1/2 in, Spigot x Slip, 100 to 400 psi Pressure

Used to reduce from fitting socket to CPVC tubing. Bagged.
$0.59

GENOVA 500 Series 53040Z Transition Union, 3/4 in, Slip Joint x FIP, 100 psi Pressure

This special fitting is designed to compensate for the difference in coefficients of expansion which exist between CPVC and metal pipe in hot water applications. Solvent welds directly to CPVC tube and adapts to standard male pipe threads. PTFE thread tape is the accepted method of sealing pipe threads on CPVC fittings. Do not use other materials or compounds unless approved by the manufacturer.
$9.99

GENOVA 500 Series 53045Z Transition Union, 1/2 in, Slip Joint x MIP, 100 psi Pressure

This special fitting is designed to compensate for the difference in coefficients of expansion which exist between CPVC and metal pipe in hot water applications. Solvent welds directly to CPVC tube and adapts to standard female pipe threads. PTFE thread tape is the accepted method of sealing pipe threads on CPVC fittings. Do not use other materials or compounds unless approved by the manufacturer.
$7.99

GENOVA 500 Series 53050Z Transition Union, 3/4 in, Slip Joint x MIP, 100 psi Pressure

This special fitting is designed to compensate for the difference in coefficients of expansion which exist between CPVC and metal pipe in hot water applications. Solvent welds directly to CPVC tube and adapts to standard female pipe threads. PTFE thread tape is the accepted method of sealing pipe threads on CPVC fittings. Do not use other materials or compounds unless approved by the manufacturer.
$8.99

GENOVA 500 Series 53373Z Transition Union, 1/2 in, Slip Joint x FIP, 100 psi Pressure

Used to transition from metal male pipe threads to CPVC. Permits easy disassembly of piping system.
$4.29

GENOVA 500 Series 53376Z/TUM-0750 Transition Union, 3/4 in, Slip Joint x MIP, 100 psi Pressure

Used to transition from metal female pipe threads to CPVC. Permits easy disassembly of piping.
$6.99

GENOVA 53374Z/TUM-0500 Transition Union, 1/2 in, Slip Joint x MIP, 100 psi Pressure

Used to transition from metal female pipe threads to CPVC. Permits easy disassembly of piping.
$4.99

GENOVA Genogrip 500 530751 Street Adapter, 1/2 x 5/8 in, Spigot x Tubing, CPVC, 100 psi Pressure

These patented adapters solvent weld directly into standard fittings and adapt mechanically to both PEX tubing and copper tubing by utilizing a special metal gripper ring supplied with the fitting. These fittings can be used in conjunction with CPVC fittings to create an unlimited range of fittings to connect to any type of water supply tubing.
$6.99
;