Two 49in heavy-duty extruded aluminum rails with patented quick-to-assemble connector, guide assures true and accurate cuts, includes both rails, joiner plate and two C clamps, use with circular saw, router, utility knife, jigsaw and other tools.
The Kreg Rip-Cut??? turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF and other large sheets. With the Rip-Cut???, you can cut with the confidence you want and the precision you need. The Rip-Cut??? easily makes straight, accurate, repeatable cuts without measuring, marking or having to keep the saw on the cut line. The Rip-Cut??? does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you want up to 24 in using the built-in measuring scale and then make your cut. With a built-in measuring scale, you don't have to measure and mark each cut, either. Just lock the saw sled at your desired cut width and you're all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut??? makes it easier to cut down large sheets by yourself. The Rip-Cut??? is very easy to use. Simply mount your saw to the universal sled it accepts most left-blade or right-blade saws and then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24 in) using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. You'll get straight, accurate, repeatable cuts easily every time.
The Square-Cut™ allows you to quickly and accurately crosscut boards up to 12 in wide. Whether you're using a circular saw or a jigsaw, the Square-Cut™ ensures great results. Just position the Square-Cut™ against the edge of your board and the built-in guide arm ensures that it sits ideally square. Plus, the guide arm is adjustable, so you can set it to match the offset between the edge of the saw base and blade. Simply position the end of the guide arm on your cut line and the Square-Cut™ will be automatically aligned to guide your saw through the cut. That eliminates the guesswork of having to align your blade by eye and then hold the keep it on the line as you cut. With the Square-Cut™, you'll get great crosscuts every time.