Drywall Sanding Paper

View as Grid List
Sort by
Display per page
Filter by attributes

3M 88599 Sandpaper, 1500-Grit, Ultra Fine, Silicone Carbide, Tan

Sharp, synthetic silicon carbide cuts fast and smooth for wet or dry sanding between coats of varnish, paint or other finishes, sanding metal for repainting or prior primer coat and wet finishing of plastic/fiberglass and top coats. Use with water to reduce clogging and extend abrasive life. Packaging strong enough to use as storage container for unused sheets.
$1.79

3M 88600 Sandpaper, 180-Grit, Fine, Silicone Carbide, Tan

Sharp, synthetic silicon carbide cuts fast and smooth for wet or dry sanding between coats of varnish, paint or other finishes, sanding metal for repainting or prior primer coat and wet finishing of plastic/fiberglass and top coats. Use with water to reduce clogging and extend abrasive life. Packaging strong enough to use as storage container for unused sheets.
$1.49

3M 88602 Sandpaper, 120-Grit, Fine, Silicone Carbide, Tan

Sharp, synthetic silicon carbide cuts fast and smooth for wet or dry sanding between coats of varnish, paint or other finishes, sanding metal for repainting or prior primer coat and wet finishing of plastic/fiberglass and top coats. Use with water to reduce clogging and extend abrasive life. Packaging strong enough to use as storage container for unused sheets.
$1.79

3M 9084 Sandpaper, 600-Grit, Ultra Fine, Silicone Carbide

Sharp, synthetic, silicon carbide cuts fast to dry or wet sand between coats of varnish, paint and other finishes or to sand metal for repainting or prior primer coat. Use with water to reduce clogging and extend abrasive life.
$4.99

3M 9085 Sandpaper, 400-Grit, Super Fine, Silicone Carbide

Sharp, synthetic, silicon carbide cuts fast to dry or wet sand between coats of varnish, paint and other finishes or to sand metal for repainting or prior primer coat. Use with water to reduce clogging and extend abrasive life.
$4.99

3M 9086 Sandpaper, 320-Grit, Extra Fine, Silicone Carbide

Sharp, synthetic, silicon carbide cuts fast to dry or wet sand between coats of varnish, paint and other finishes or to sand metal for repainting or prior primer coat. Use with water to reduce clogging and extend abrasive life.
$4.99

3M 9087 Sandpaper, 220-Grit, Very Fine, Silicone Carbide

Sharp, synthetic, silicon carbide cuts fast to dry or wet sand between coats of varnish, paint and other finishes or to sand metal for repainting or prior primer coat. Use with water to reduce clogging and extend abrasive life.
$4.99

3M 9088 Sandpaper, Extra Fine/Super Fine/Very Fine, Silicone Carbide

Sharp, synthetic, silicon carbide cuts fast to dry or wet sand between coats of varnish, paint and other finishes or to sand metal for repainting or prior primer coat. Use with water to reduce clogging and extend abrasive life.
$4.99

3M 9091 Sandpaper, 150-Grit, Fine, Silicone Carbide

Die-cut to fit most drywall sanding tools, quickly attaches to hand or pole sanders with precut tabs. Designed for sanding drywall joints, patching compounds and plaster to a fine finish. Also used on wood, metal, plastic and painted surfaces. Sharp silicon carbide abrasive lasts long, cuts fast.
$4.29

3M 9092 Sandpaper, 100-Grit, Medium, Silicone Carbide

Die-cut to fit most drywall sanding tools, quickly attaches to hand or pole sanders with precut tabs. Designed for sanding drywall joints, patching compounds and plaster to a fine finish. Also used on wood, metal, plastic and painted surfaces. Sharp silicon carbide abrasive lasts long, cuts fast.
$4.29

3M 99419 Sandpaper, 600-Grit, Super Fine, Silicone Carbide, Tan

Sharp, synthetic silicon carbide cuts fast and smooth for wet or dry sanding between coats of varnish, paint or other finishes, sanding metal for repainting or prior primer coat and wet finishing of plastic/fiberglass and top coats. Use with water to reduce clogging and extend abrasive life. Packaging strong enough to use as storage container for unused sheets.
$1.39

3M 99420 Sandpaper, 400A-Grit, Super Fine, Silicone Carbide, Black

Sharp, synthetic silicon carbide cuts fast and smooth for wet or dry sanding between coats of varnish, paint or other finishes, sanding metal for repainting or prior primer coat and wet finishing of plastic/fiberglass and top coats. Use with water to reduce clogging and extend abrasive life. Packaging strong enough to use as storage container for unused sheets.
$1.39

3M 99421 Sandpaper, 320-Grit, Extra Fine, Silicone Carbide, Tan

Sharp, synthetic silicon carbide cuts fast and smooth for wet or dry sanding between coats of varnish, paint or other finishes, sanding metal for repainting or prior primer coat and wet finishing of plastic/fiberglass and top coats. Use with water to reduce clogging and extend abrasive life. Packaging strong enough to use as storage container for unused sheets.
$1.39

3M 99422 Sandpaper, 220-Grit, Very Fine, Silicone Carbide, Tan

Sharp, synthetic silicon carbide cuts fast and smooth for wet or dry sanding between coats of varnish, paint or other finishes, sanding metal for repainting or prior primer coat and wet finishing of plastic/fiberglass and top coats. Use with water to reduce clogging and extend abrasive life. Packaging strong enough to use as storage container for unused sheets.
$1.39

3M 99430 Sandpaper, 120-Grit, Fine, Aluminum Oxide, Tan

Sharp, synthetic silicon carbide mineral cuts fast and smooth for long-lasting performance. Precut to fit most drywall sanding tools. Designed for sanding drywall joints, patching compounds, paint and plaster. Packaging strong enough to use as storage container for unused sheets.
$0.39

3M 99432 Sandpaper, 100-Grit, Medium, Aluminum Oxide, Tan

Sharp, synthetic silicon carbide mineral cuts fast and smooth for long-lasting performance. Precut to fit most drywall sanding tools. Designed for sanding drywall joints, patching compounds, paint and plaster. Packaging strong enough to use as storage container for unused sheets.
$0.39

3M 99433 Sanding Sheet, 80-Grit, Medium, Aluminum Oxide, Tan

3M Pro-Pak??? Drywall, plaster sanding sheets are designed for sanding drywall joint compounds (light or regular), patching compounds and plaster. It is made with aluminum oxide, a tough synthetic mineral that cuts cleanly and leaves a smooth finish.
$0.39

3M SandBlaster 11060-G-6 Sandpaper, 60-Grit, Coarse, Synthetic Mineral

Can be used on a wide range of surfaces including paint, wood, metal, plastic and fiberglass. No slip grip backing. Sharp and synthetic minerals cut fast, stay sharp and resist clogging. Can be used by hand, on a sanding block.
$6.99

3M SandBlaster 11080-G-6 Sandpaper, 80-Grit, Coarse, Aluminum Oxide

Can be used on a wide range of surfaces including paint, wood, metal, plastic and fiberglass. No slip grip backing. Sharp and synthetic minerals cut fast, stay sharp and resist clogging. Can be used by hand, on a sanding block.
$6.99

3M SandBlaster 11120-G-6 Sandpaper, 120-Grit, Medium, Aluminum Oxide

Can be used on a wide range of surfaces including paint, wood, metal, plastic and fiberglass. No slip grip backing. Sharp and synthetic minerals cut fast, stay sharp and resist clogging. Can be used by hand, on a sanding block.
$6.99

3M SandBlaster 11180-G-6 Sandpaper, 180-Grit, Medium, Synthetic Mineral

Can be used on a wide range of surfaces including paint, wood, metal, plastic and fiberglass. No slip grip backing. Sharp and synthetic minerals cut fast, stay sharp and resist clogging. Can be used by hand, on a sanding block.
$6.99

3M SandBlaster 11220-G-6 Sandpaper, 220-Grit, Fine, Synthetic Mineral

Can be used on a wide range of surfaces including paint, wood, metal, plastic and fiberglass. No slip grip backing. Sharp and synthetic minerals cut fast, stay sharp and resist clogging. Can be used by hand, on a sanding block.
$6.99

3M SandBlaster 11320-G-6 Sandpaper, 320-Grit, Fine, Synthetic Mineral

Can be used on a wide range of surfaces including paint, wood, metal, plastic and fiberglass. No slip grip backing. Sharp and synthetic minerals cut fast, stay sharp and resist clogging. Can be used by hand, on a sanding block.
$6.99

3M SandBlaster 20060-G-4 Sandpaper, 60-Grit, Coarse, Synthetic Mineral

Can be used on a wide range of surfaces including paint, wood, metal, plastic and fiberglass. No slip grip backing. Sharp and synthetic minerals cut fast, stay sharp and resist clogging. Can be used by hand, on a sanding block.
$6.49

3M SandBlaster 20080-G-4 Sandpaper, 80-Grit, Coarse, Aluminum Oxide

Can be used on a wide range of surfaces including paint, wood, metal, plastic and fiberglass. No slip grip backing. Sharp and synthetic minerals cut fast, stay sharp and resist clogging. Can be used by hand, on a sanding block.
$6.49

3M SandBlaster 20120-G-4 Sandpaper, 120-Grit, Medium, Aluminum Oxide

Can be used on a wide range of surfaces including paint, wood, metal, plastic and fiberglass. No slip grip backing. Sharp and synthetic minerals cut fast, stay sharp and resist clogging. Can be used by hand, on a sanding block.
$6.49

3M SandBlaster 20150-G-4 Sandpaper, 150-Grit, Medium, Aluminum Oxide

Can be used on a wide range of surfaces including paint, wood, metal, plastic and fiberglass. No slip grip backing. Sharp and synthetic minerals cut fast, stay sharp and resist clogging. Can be used by hand, on a sanding block.
$6.49

3M SandBlaster 20220-G-4 Sandpaper, 220-Grit, Fine, Aluminum Oxide

Can be used on a wide range of surfaces including paint, wood, metal, plastic and fiberglass. No slip grip backing. Sharp and synthetic minerals cut fast, stay sharp and resist clogging. Can be used by hand, on a sanding block.
$6.49

3M SandBlaster 20320-G-4 Sandpaper, 320-Grit, Very Fine, Aluminum Oxide

Can be used on a wide range of surfaces including paint, wood, metal, plastic and fiberglass. No slip grip backing. Sharp and synthetic minerals cut fast, stay sharp and resist clogging. Can be used by hand, on a sanding block.
$6.49

3M SandBlaster 20400-G-4 Sandpaper, 400-Grit, Ultra Fine, Aluminum Oxide

Can be used on a wide range of surfaces including paint, wood, metal, plastic and fiberglass. No slip grip backing. Sharp and synthetic minerals cut fast, stay sharp and resist clogging. Can be used by hand, on a sanding block.
$6.49

3M SandBlaster 30080ES-15-G Sandpaper, 80-Grit, Coarse, Aluminum Oxide, Green

For all applications, especially paint and varnish removal. Green in color for easy identification, this sandpaper strips coatings quickly and resists clogging even when sanding latex paint.
$22.99

3M SandBlaster 30120ES-15-G Sandpaper, 120-Grit, Medium, Aluminum Oxide

For bare surfaces. No-slip grip backing. Clog resistant.
$18.99

3M SandBlaster 30220ES-15-G Wet/Dry Abrasive Sandpaper, 220-Grit, Very Fine, Aluminum Oxide, Gold

Ideal for sanding between coats. Gold in color for easy identification. No-slip grip backing.
$11.99

3M SandBlaster 30320ES-15-G Wet/Dry Abrasive Sandpaper, 320-Grit, Very Fine, Aluminum Oxide, Gold

Ideal for sanding between coats. Gold in color for easy identification. No-slip grip backing.
$11.99

Gator 3260 Sanding Sheet, 220-Grit, Extra Fine, Aluminum Oxide

Gator's multi-purpose aluminum oxide sandpaper provides excellent performance at a value price. These sheets are ideal for both hand and power tool sanding on wood, metal, fiberglass and painted surfaces.
$0.49

Gator 3261 Sanding Sheet, 180-Grit, Extra Fine, Aluminum Oxide

Gator's multi-purpose aluminum oxide sandpaper provides excellent performance at a value price. These sheets are ideal for both hand and power tool sanding on wood, metal, fiberglass and painted surfaces.
$0.49

Gator 3262 Sanding Sheet, 150-Grit, Fine, Aluminum Oxide

Gator's multi-purpose aluminum oxide sandpaper provides excellent performance at a value price. These sheets are ideal for both hand and power tool sanding on wood, metal, fiberglass and painted surfaces.
$0.59

Gator 3263 Sanding Sheet, 120-Grit, Fine, Aluminum Oxide

Gator's multi-purpose aluminum oxide sandpaper provides excellent performance at a value price. These sheets are ideal for both hand and power tool sanding on wood, metal, fiberglass and painted surfaces.
$0.59

Gator 3264 Sanding Sheet, 100-Grit, Medium, Aluminum Oxide

Gator's multi-purpose aluminum oxide sandpaper provides excellent performance at a value price. These sheets are ideal for both hand and power tool sanding on wood, metal, fiberglass and painted surfaces.
$0.59

Gator 3265 Sanding Sheet, 80-Grit, Medium, Aluminum Oxide

Gator's multi-purpose aluminum oxide sandpaper provides excellent performance at a value price. These sheets are ideal for both hand and power tool sanding on wood, metal, fiberglass and painted surfaces.
$0.69

Gator 3266 Sanding Sheet, 60-Grit, Coarse, Aluminum Oxide

Gator's multi-purpose aluminum oxide sandpaper provides excellent performance at a value price. These sheets are ideal for both hand and power tool sanding on wood, metal, fiberglass and painted surfaces.
$0.79

Gator 3267 Sanding Sheet, 50-Grit, Coarse, Aluminum Oxide

Gator's multi-purpose aluminum oxide sandpaper provides excellent performance at a value price. These sheets are ideal for both hand and power tool sanding on wood, metal, fiberglass and painted surfaces.
$0.89

Gator 3269 Sanding Sheet, 36-Grit, Extra Coarse, Aluminum Oxide

Gator's multi-purpose aluminum oxide sandpaper provides excellent performance at a value price. These sheets are ideal for both hand and power tool sanding on wood, metal, fiberglass and painted surfaces.
$0.99

Gator 3280 Sanding Sheet, 600-Grit, Silicone Carbide

Gator waterproof sanding sheets are designed for applications where wet sanding is required. The paper backing is specially treated to maintain its strength and shape even after being soaked in water for an extended period of time. The sharp, fast cutting silicon carbide grain works well on metal surfaces and between coats of paint, primers and sealers.
$1.19

Gator 3281 Sanding Sheet, 400-Grit, Silicone Carbide

Gator waterproof sanding sheets are designed for applications where wet sanding is required. The paper backing is specially treated to maintain its strength and shape even after being soaked in water for an extended period of time. The sharp, fast cutting silicon carbide grain works well on metal surfaces and between coats of paint, primers and sealers.
$1.19

Gator 3282 Sanding Sheet, 320-Grit, Silicone Carbide

Gator waterproof sanding sheets are designed for applications where wet sanding is required. The paper backing is specially treated to maintain its strength and shape even after being soaked in water for an extended period of time. The sharp, fast cutting silicon carbide grain works well on metal surfaces and between coats of paint, primers and sealers.
$0.99

Gator 3283 Sanding Sheet, 220-Grit, Silicone Carbide

Gator waterproof sanding sheets are designed for applications where wet sanding is required. The paper backing is specially treated to maintain its strength and shape even after being soaked in water for an extended period of time. The sharp, fast cutting silicon carbide grain works well on metal surfaces and between coats of paint, primers and sealers.
$0.99

Gator 3284 Sanding Sheet, 180-Grit, Silicone Carbide

Gator waterproof sanding sheets are designed for applications where wet sanding is required. The paper backing is specially treated to maintain its strength and shape even after being soaked in water for an extended period of time. The sharp, fast cutting silicon carbide grain works well on metal surfaces and between coats of paint, primers and sealers.
$1.19

Gator 3285 Sanding Sheet, 150-Grit, Silicone Carbide

Gator waterproof sanding sheets are designed for applications where wet sanding is required. The paper backing is specially treated to maintain its strength and shape even after being soaked in water for an extended period of time. The sharp, fast cutting silicon carbide grain works well on metal surfaces and between coats of paint, primers and sealers.
$1.19