The MATRIX??? Quick-connect system lets you drill, cut, sand and more with a base tool and a variety of interchangeable attachments. Featuring best-in-class speed and torque, the system enables you to build your workshop as you go - and tackle virtually any household task - while saving money and space.
Features variable speed reversing for controlled drilling and driving, bubble level, on-board bit storage. 0 to 1500 rpm, capacity in steel is 3/8 in, wood 1 in. Includes one double-ended screwdriving bit and storage bag.
Featuring a 360 deg handle for added control, this 7 A 1/2 in drill/driver is powerful enough to handle tough applications. An all metal keyed chuck adds durability and increased bit retention. Variable speed enables controlled drilling and driving.
Bosch Power Tools deliver stronger performance and lasting reliability. The Bosch 1006VSR variable speed drill is rated best in class power-to-weight ratio. Equipped with service minder brushes. It automatically stops tool when brush replacement is needed. Improved lock-on switch design with recessed in handle to prevent accidental lock-on.
The DW130V 1/2 in spade handle drill features variable speed reversible switch to reduce air bubbles when mixing mud. 120 V motor delivers 0 to 550 rpm to increase torque for drilling and mud mixing. Lightweight and comfortable grip to minimize downtime.
The DWD210G 1/2 in (13 mm) VSR pistol grip drill has a powerful 10 A motor with overload protection to drill at 0 to 1250 rpm in forward or reverse. Constructed with soft-grip handle for comfort and housed in metal gear for durability.
The DWD215G 1/2 in VSR mid-handle grip drill with keyless chuck has a powerful 10 A motor with overload protection to drill at 0 to 1250 rpm in forward or reverse. Constructed with soft-grip handle for comfort and housed in metal gear for durability.
The DWE1014 3/8 in 0 to 2800 rpm VS drill with keyed chuck is compact and lightweight to increase comfort and reduce fatigue. Powerful 7 A motor drills at high-speed according to the user's desired setting.
Works with the M-4 core rig. Water hose connection for wet drilling. Shoulder brace and side handle for stability. 115 V, 1300 W, 1100/2200 rpm, up to 3 in drilling capacity. Includes heavy-duty carrying case and wrench.
Features variable speed reversing dial located in switch, lightweight, compact, maximum torque of 108.1 in-lb, form fit palm grip with minimal vibration. 0 to 2500 rpm no load speed, 108.1 in-lb maximum torque, cut capacity of 1 in wood, 3/8 in steel and weighs 3.1 lb.
Features variable speed control trigger, cast aluminum gear housing, double gear reduction, oversized reversible switch and trigger lock, removable side handle and belt hook. Designed to fit in hand for improved control with minimal vibration. 0 to 850 rpm no-load speed, 416 in-lb max torque, drilling capacity of 2-9/16 in wood, 1/2 in steel, 4-1/2 in hole saw and weighs 4.6 lb. Includes chuck key, side handle, handle joint, injection molded carrying case.
The Makita 6408K 3/8 in drill has a powerful 4.9 A motor with variable speed (0-2500) for a range of applications. Convenience features include a keyless chuck for fast and easy bit installation and removal and an in-line design with a large trigger switch for easy operation. The 6408 has a lower decibel rating (79dB) for quieter operation. The 6408K includes a Tool Case.
With a 10-5/8 in long body and 2-5/8 in head width, the Makita 3/8 in angle drill (model DA3010F) provides a compact solution when working between framing studs and other close quarter applications. The paddle switch with variable speed provides increased user convenience and the torque-limiting clutch is engineered to disengage the gears if the bit binds. The LED light illuminates the work surface for improved visibility.
The Makita 1/2 in drill (model DP4000) has a powerful 6.5 A motor for heavy-duty continuous work. It includes a large and conveniently located reversing switch and lock-on button. It contains a large two-position side handle for increased operator comfort and control and a convenient belt clip. Ideal for a range of drilling applications.
The Makita 1/2 in spade handle drill (model DS4011) features a well-balanced design with a powerful motor engineered for constant power and speed for industrial drilling and mixing applications. The DS4011 has an 8.5 A motor that delivers 600 rpm for increased speed and torque, making it ideal for drilling large holes. The powerful motor is engineered for constant speed for efficient mixing performance. The DS4011 has a heavy-duty industrial 1/2 in drill chuck, with all ball bearing construction for smooth operation and longer tool life. The rocker switch makes it easy to quickly transition between forward and reverse operation. The D-handle rotates 360 deg with 24 positive stops for multi-position operation, with a rubberized grip for increased operator comfort and control. The DS4011 has a well-balanced design and weighs only 6.3 lb for reduced operator fatigue. The DS4011 is ideal for drilling large holes, with consistent speed that also makes it ideal for mixing.
Perform at higher speeds. The 3/8 in Magnum?? drill with all metal chuck makes drilling, surface finishing and other maintenance tasks go quickly with its extra speed. The drill's powerful motor delivers up to 2500 rpm. The all metal gear case and diaphragm provide high durability on the jobsite, while the GRIP-LOK??? chuck adds convenience and extra grip strength. The ergonomic, tactile grip and two-finger trigger optimize user comfort and balance.
Built to handle industrial and construction applications with ease. The 1/2 in Magnum?? drill has the raw power of a Milwaukee-built motor to perform in forward and reverse on wood, metal, plastics and composites. The exclusive brush system speeds brush changes to under one minute. Detach the QUIK-LOK cord easily for storage or service replacement.
Reliable performance on the toughest drilling applications. The power and durability of the 3/8 in drill make it the ideal tool for metal drilling, wood drilling and fastening applications. The powerful motor and variable speed trigger deliver speed for fast drilling, while the all metal gear case offers durability and excellent support in high torque applications. The soft-grip handle and two-finger trigger provide added comfort during prolonged use.
Outperforms all other 1/2 in drills in its category. The 1/2 in Magnum?? drill has the power and construction to deliver long-lasting performance. The all metal gear case and diaphragm provide high durability on the jobsite. The ergonomic, textured grip and two-finger trigger optimize user comfort and balance.
Outperforms all other 1/2 in drills in its category. The 1/2 in Magnum?? drill has the power and construction to deliver long-lasting performance. The all metal gear case and diaphragm provide high durability on the jobsite. The ergonomic, tactile grip and two-finger trigger optimize user comfort and balance.
The 3/8 in close quarter angle drill goes where other drills can't. This is the ideal tool for drilling and fastening applications in tight spaces, between floor joists and working overhead. It is compact and lightweight, with a unique chuck angle for close quarters and angled cord exit to keep the cord away from the work area. The drill features a large paddle trigger for smooth control and a conveniently located forward/reverse lever. The textured palm grip provides comfort and control in all positions so you can get the job done like never before.
This compact specialty drill packs big power. The 1/2 in compact drill has the power and versatility to handle high-torque drilling and material mixing applications. Built for two-handed operation, the drill features extra-long handles for added leverage and control. You'll get quiet performance from the heat-treated, helical-cut gears.
Setting the standard for large-hole drilling in tight spaces. The 1/2 in Hole-Hawg?? drill offers power and torque in a compact design that makes it ideal for drilling between studs and joists. The powerful motor features two-speed ranges plus reverse for increased versatility. The drill offers a 4-5/8 in self-feed bit capacity and an extra-long pipe handle to help you control power.
Setting the standard for power and speed. The 1/2 in Super Hawg??? is the right tool to use for drilling holes of all sizes in wood frame construction. The two-speed adjustable Milwaukee-built motor has a high operating speed, with an easy-turn gear shift knob and a clutch in the low gear range. You'll get maximum versatility and comfort with the soft-grip Roto-Lok?? handle, which shifts between three positions and the front T-bar handle on the gear case. A durable carrying case is included with this heavy-duty tool.
The ideal tool for stud and joist drilling - and a host of other applications. With a powerful Milwaukee-built motor and right-angle drive head, the 1/2 in D-handle right-angle drill is flexible enough to handle a variety of applications. The powerful 7 A motor delivers 0 to 500 rpm, so when combined with the two-speed head, you get 0 to 335 rpm on the low setting and 0 to 750 rpm on high. Helical-cut, heat-treated gears deliver quiet performance and extended tool life with wood, metal, plastics and composites. The drill's head and handle swivel 360 deg and there's a side handle for a secure grip and comfortable, controlled operation. The QUIK-LOK cord detaches easily for storage or service replacement. This 1/2 in D-handle right-angle drill comes in an impact-resistant carrying case, with a 9/16 in open end wrench and 3/16 in socket wrench.
Designed for high-performance jobsites, the 3/8 in variable speed drill provides reliable power and durability for projects requiring extended tool usage. This drill is designed to provide the speed needed for a variety of drilling applications. The high-torque gear design makes the drill ideal for metal and wood fabrication, pilot hole drilling in deck building or frame construction and other applications requiring the extended runtime of a corded drill.
Our 7 A 1/2 in variable speed drill is ideal for drilling large holes into thick materials. The low-speed, high-torque gear design is combined with a high output, 7 A motor to deliver enough torque for the toughest drilling applications. Its cast metal gear housing offers reliable performance. Plus, the mid-handle design with an adjustable, cast-side handle gives improved balance and handling.
3/8 in VSR drill with powerful 4.5 A motor. VSR switch for drilling, driving screws, sanding and many other applications. 0 to 3000 rpm. Maximum drilling capacity 3/8 in steel, 3/4 in wood. Large trigger with infinite speed control. 3/8 in keyless chuck for convenience when changing bits. 10 ft cord to allow most uses without an extension cord. Weighs 3.96 lb.
Drills through mild steel, hardwood and softwood. Features mid-grip design for balance and control, keyless chuck for fast and easy bit changes, two-finger variable speed trigger for control between low to high-speeds. 6 ft L cord, maximum hole diameter in hardwood is 3/8 in, softwood is 3/4 in, 120 V, 50-60 Hz, 2600 rpm no load speed and weighs 3.2 lb. Includes carrying bag.