Electrical Connectors

View as Grid List
Sort by
Display per page
Filter by attributes

Erico 611380UPC Grounding Rod, 1/2 in Dia Nominal, 8 ft L, Steel

Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1.
$11.99

Erico 615880UPC Grounding Rod, 5/8 in Dia Nominal, 8 ft L, Steel

Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1.
$13.99

Erico IBTB Intersystem Bonding Termination Bar, Polymer

The Intersystem Bonding Termination (IBTB), part of the Vent Erico line of facility electrical protection products, is designed to meet the requirements of the 2008 NEC?? Article 250.94 bonding for other systems. The IBTB is mounted adjacent to the meter base or service entrance equipment and is a convenient way to interconnect and terminate grounding conductors from telephone, CATV or radio and television antennas. The IBTB includes corrosion-resistant, stainless steel mounting hardware and is easily accessible for connection and inspection. The lay-in connection clamp (#6 to #2 AWG or 16 to 35 sq-mm) allows easy installation of the grounding electrode conductor in one continuous length, where possible. The polymeric base and housing is impact-resistant, UV-stabilized and meets UL?? requirements for weatherability performance.
$12.99

Gardner Bender 10-410C Crimp Connector, 600 V, 10 to 18 AWG, Silver

Crimp connectors for strong, vibration-resistant permanent connections in branch circuits and fixture wiring. UL listed.
$8.99

Gardner Bender 19-AWC Wire Connector Kit, 600 V

Gardner Bender wire connectors are engineered to exceed the expectations of professional electricians. Ideal for commercial or residential applications GB wire connectors offer world class quality, performance and application versatility. Our connectors provide maximum application flexibility by offering contractors and do it yourselfers myriad packaging options, ergonomic designs and wire ranges. They are designed to require fewer turns to reach required torque and meet or exceed UL pull out and dielectric test requirements.
$1.69

Gardner Bender 20-102 Ring Terminal, 600 V, 22 to 18 AWG, Vinyl Insulation, Red

Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed.
$2.59

Gardner Bender 20-108 Ring Terminal, 600 V, 12 to 10 AWG, Vinyl Insulation, Yellow

Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed.
$2.79

Gardner Bender 20-112 Spade Terminal, 600 V, 22 to 18 AWG, Vinyl Insulation, Red

The Gardner Bender vinyl-insulated spade terminals provide dependable protection from high temperature and electric shock. Color-coded insulation for easy identification.
$2.59

Gardner Bender 20-123 Fully Insulated Butt Splice, 16 to 14 AWG, Vinyl, Blue

For easy crimp splicing. Insulated copper conductor rated to 600 V maximum. Temperature rating of 167 deg F maximum. Clamshell package. cULus Listed.
$2.59

Gardner Bender 20-153P Disconnect Terminal, 600 V, 16 to 14 AWG, Vinyl Insulation, Blue

Nylon fully insulated, rated at 600 V. 0.250 in x 0.032 in tab. 105 deg C temperature rating. Card contains male and female disconnects.
$2.79

Gardner Bender 20-2218 Tap Splice, 600 V, 22 to 18 AWG, Red

For snap-in splicing of low-voltage AWG wire without prior stripping. 75 deg C temperature rating. Clamshell.
$1.99

Gardner Bender 20-410 Connector, 18 to 10 AWG, Silver

Gardner Bender wire connectors are engineered to exceed the expectations of professional electricians. Ideal for commercial or residential applications GB wire connectors offer world-class quality, performance and application versatility. Our connectors provide maximum application flexibility by offering contractors and Do-It-Yourselfers myriad packaging options, ergonomic designs and wire ranges.
$1.99

Gardner Bender 25-AWC Wire Connector Kit, 600 V

Wiregard twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. Wiregard connectors feature a straight-type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions.
$4.99

Gardner Bender GGP-1502 Grounding Pigtail, Copper

GB offers a convenient grounding accessories line of products suitable for most job requirements. This grounding pig tail is made from #12 AWG stranded wire. One end is terminated with a bare fork terminal. The other end is a captured screw.
$2.99

Gardner Bender GreenGard 10-095 Wire Connector, 600 V, 14 to 10 AWG, Green

Specifically designed for making positive ground connections with a hole in the tip of the connector to feed ground wire through. GreenGard connectors feature the same live-action as GB WingGard connectors with knurled wings for a sure grip and greater twisting leverage/torque. In addition GreenGard connectors offer added plating protection for corrosion resistance in grounding applications. Inside the connector a zinc-plated square wire spring ensures a secure connection that resists corrosion. The thermoplastic shell is designed for long-lasting strength and resists chemicals while the deep skirt supports smooth wire entry and coverage of stripped wires.
$12.99

Gardner Bender GreenGard 19-095 Wire Connector, 600 V, 14 to 10 AWG, Green

Specifically designed for making positive ground connections with a hole in the tip of the connector to feed ground wire through. GreenGard connectors feature the same live-action as GB WingGard connectors with knurled wings for a sure grip and greater twisting leverage/torque. In addition GreenGard connectors offer added plating protection for corrosion resistance in grounding applications. Inside the connector a zinc-plated square wire spring ensures a secure connection that resists corrosion. The thermoplastic shell is designed for long-lasting strength and resists chemicals while the deep skirt supports smooth wire entry and coverage of stripped wires.
$1.69

Gardner Bender GreenGard 25-095 Wire Connector, 600 V, 14 to 10 AWG, Green

GB's GreenGard grounding wire connectors are specifically designed for making positive ground connections and feature the same live action as GB's WingGard connections with the added plating protection for corrosion resistance in grounding applications. Green in color and features a hole at the top of the connector for feeding the grounding wire through for sure connections.
$6.99

Gardner Bender GTF-600 Friction Tape, 60 ft L, Black

Gb's friction tape is specially designed to offer the best in gripping. A matted finish gives the user a superior, non-slip surface. Friction tape is perfect for use over electrical splices or for wrapping grips on tools, handles or sporting goods.
$3.99

Gardner Bender HST-1300 Splice Kit, 14 to 8 AWG, Black

For UF cables minimum #14/3, 12/2 maximum #8/3. Kit includes set screw splice connector and one 8 in x 1.3 in Dia heavy wall polyolefin heat shrink tubing.
$18.99

Gardner Bender PEC-31525 Coaxial Cable Clamp, Polyethylene, Black

The Gardner Bender 1/4 in coaxial cable clamp secures RG-59, RG-6 coaxial cables and others. This cable clamp includes a combo screw for safer installations and features a screw-in depth of 1/2 in.
$3.99

Gardner Bender PPC-1525 Cable Clamp, 1/4 in Dia Max Bundle, Plastic, White

Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 1/4 in (6 mm) Dia.
$1.69

Gardner Bender PPC-1538 Cable Clamp, 3/8 in Dia Max Bundle, Plastic, White

Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 3/8 in (10 mm) Dia.
$1.69

Gardner Bender PPC-1550 Cable Clamp, 1/2 in Dia Max Bundle, Plastic, White

Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 1/2 in (13 mm) Dia.
$1.69

Gardner Bender TK-40 Terminal Kit, 600 V, 22 to 10 AWG, Assorted

Slide-card kit with 40 assorted terminals and disconnects. Butt splices: Five 22-16 AWG red, four 16-14 AWG blue, three 12-10 AWG yellow. Ring terminals: Six 22-16 AWG red, four 16-14 AWG blue. Spade terminals: Five 22-16 AWG red, three 12-10 AWG yellow. Female disconnects: Five 22-16 AWG red, five 16-14 AWG blue.
$5.99

Gardner Bender WireGard 10-001 Wire Connector, 300/600 V, 22 to 16 AWG, Gray

WireGard™ twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard™ connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
$5.69

Gardner Bender WireGard 10-002 Wire Connector, 300 V, 22 to 16 AWG, Blue

The industry's standard twist-on connector with quality performance and durability. GB specifies this connector for a wire range of 22 to 16 AWG and recommends a wire combination of min (3) #22 wire and max (3) #16. It is blue in color for easy color code identification. Recommended for copper to copper connections only. Made from tough, thermoplastic shells which guard against hydrocarbons, diluted acid or alkaline solutions.
$6.99

Gardner Bender WireGard 10-003 Wire Connector, 300/600 V, 22 to 14 AWG, Orange

WireGard™ twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard™ connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
$7.59

Gardner Bender WireGard 10-004 Wire Connector, 300/600 V, 18 to 10 AWG, Yellow

WireGard™ twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard™ connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
$8.99

Gardner Bender WireGard 10-006 Wire Connector, 300/600 V, 18 to 10 AWG, Red

WireGard™ twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard™ connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
$10.99

Gardner Bender WireGard 19-001 Wire Connector, 300 V, 22 to 16 AWG, Gray

WireGard™ twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard™ connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 deg C. Color coded for quick and easy size selection.
$1.69

Gardner Bender WireGard 19-002 Wire Connector, 300 V, 22 to 16 AWG, Blue

WireGard™ twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard™ connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
$1.69

Gardner Bender WireGard 19-003 Wire Connector, 300/600 V, 22 to 14 AWG, Orange

WireGard™ twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard™ connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
$1.69

Gardner Bender WireGard 19-004 Wire Connector, 300/600 V, 18 to 10 AWG, Yellow

WireGard™ twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard™ connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
$1.69

Gardner Bender WireGard 19-006 Wire Connector, 300/600 V, 18 to 10 AWG, Red

WireGard™ twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard™ connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
$1.69

Gardner Bender WireGard 25-001 Wire Connector, 300 V, 22 to 16 AWG, Gray

WireGard™ twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard™ connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 deg C. Color coded for quick and easy size selection.
$2.59

Gardner Bender WireGard 25-002 Wire Connector, 300 V, 22 to 16 AWG, Blue

WireGard™ twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard™ connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 deg C. Color coded for quick and easy size selection.
$2.59

Gardner Bender WireGard 25-003 Wire Connector, 300/600 V, 22 to 14 AWG, Orange

WireGard™ twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard™ connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 deg C. Color coded for quick and easy size selection.
$2.99

Gardner Bender WireGard 25-004 Wire Connector, 300/600 V, 18 to 10 AWG, Yellow

WireGard™ twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard™ connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 deg C. Color coded for quick and easy size selection.
$3.79

Gardner Bender WireGard 25-006 Wire Connector, 300/600 V, 18 to 10 AWG, Red

WireGard™ twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard™ connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 deg C. Color coded for quick and easy size selection.
$4.99

Gardner Bender Xtreme AMT-120 Insulated Butt Splice, 22 to 16 AWG, Gray

Adhesive-lined butt connectors are specially designed for waterproof heat shrink applications. Our butt splices provide quick and reliable crimp-type connections and wire repairs. Simply crimp both ends for a long-lasting, secure connection.
$4.59

GB 10-100 Tap Splice, 600 V, 16 to 14 AWG, Blue

For snap-in splicing of low-voltage AWG wire without prior stripping. 75 deg C temperature rating. Clamshell.
$4.59

GB 10-121 Fully Insulated Butt Splice, 22 to 18 AWG, Vinyl, Red

For easy crimp splicing. Insulated copper conductor rated to 600 V maximum. Temperature rating of 167 deg F maximum. Clamshell package. cULus Listed.
$7.59

GB 10-123 Fully Insulated Butt Splice, 16 to 14 AWG, Blue

For easy crimp splicing. Insulated copper conductor rated to 600 V maximum. Temperature rating of 167 deg F maximum. Clamshell package. cULus Listed.
$8.69

GB 10-126 Fully Insulated Butt Splice, 10 to 12 AWG, Vinyl, Yellow

For easy crimp splicing. Insulated copper conductor rated to 600 V maximum. Temperature rating of 167 deg F maximum. Clamshell package. cULus Listed.
$7.99

GB 20-089 Crimp Connector, 300 V, 22 to 14 AWG, White

Closed end connectors are ideal for making a simple connection of two or more wires to create a pigtail connection. The pigtail connector is a closed end, crimp on wire connector used to secure electrical connection points. The proper installation method is to connect the wires together first and then add a pigtail connector and crimp tight to provide a safe, secure and stable connection particularly in applications subject to vibration. Designed to be used with both solid and stranded wire these closed end connectors feature a tin-plated seamless copper sleeve with translucent nylon insulation. Connector rated for #22 to #14 AWG applications up to 300 V with a minimum 2 to #22 and maximum 1 #14 w/1 #18.
$2.79

GB 20-090 Crimp Connector, 300 V, 22 to 10 AWG, White

Closed end connectors are ideal for making a simple connection of two or more wires to create a pigtail connection. The pigtail connector is a closed end, crimp on wire connector used to secure electrical connection points. The proper installation method is to connect the wires together first and then add a pigtail connector and crimp tight to provide a safe, secure and stable connection particularly in applications subject to vibration. Designed to be used with both solid and stranded wire these closed end connectors feature a tin-plated seamless copper sleeve with translucent nylon insulation. Connector rated for #22 to #10 AWG applications up to 300 V.
$2.19

GB 20-100 Tap Splice, 600 V, 16 to 14 AWG, Blue

For snap-in splicing of low-voltage AWG wire without prior stripping. 75 deg C temperature rating. Clamshell.
$2.99

GB 20-103 Ring Terminal, 600 V, 16 to 14 AWG, Vinyl Insulation, Blue

Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed.
$2.59

GB 20-104 Ring Terminal, 600 V, 16 to 14 AWG, Vinyl Insulation, Blue

Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed.
$2.59

GB 20-105 Ring Terminal, 600 V, 16 to 14 AWG, Vinyl Insulation, Blue

Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed.
$2.59
;