Fasteners

View as Grid List
Sort by
Display per page

3M 49554 Cable Stacker, Plastic, 25, Bag

3M™ cable stackers organize cable runs and aid in identification, putting an end to tangled wires and the potential heating that could occur when cables are held together tightly under a single fastener. Easy installation simplifies compliance with the spacing requirements of the National Electrical Code, article 300-4-(d) and the Canadian Electric Code Part I, Section 12-516. Made from reclaimed plastic.
$0.49

Acorn International S-WM101716G250 Screw, #10 Thread, Self-Drilling Thread, Phillips Head, Phillips Drive

Wood to metal screws are made from C1022 steel, case hardened for fastening wood to steel or aluminum. #10-24 screw is a Phillips wafer head. #12-24 (#14 Head) and #14-20 screws are star drive flat head. The star drive flat head reduces camout and end load, handles greater torque than Phillips or square drive and eliminates spinning and fastener damage. For star drive use a T30 drill bit (not included). Reamer wings drill through wood and snap off when they encounter metal. The #3 drill point penetrates up to 1/4 in metal with no predrilling. Shank slot holds steel shavings and improves drilling action. Ideal for trailer beds and walls. All screws are 1000 hr salt spray test dacro-coated. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$15.99

Acorn International S-WM14314G250 Screw, #14 Thread, Self-Drilling Thread, Star Drive Head, Winged Point

Wood to metal screws are made from C1022 steel, case hardened for fastening wood to steel or aluminum. #10-24 screw is a Phillips wafer head. #12-24 (#14 Head) and #14-20 screws are star drive flat head. The star drive flat head reduces camout and end load, handles greater torque than Phillips or square drive and eliminates spinning and fastener damage. For star drive use a T30 drill bit (not included). Reamer wings drill through wood and snap off when they encounter metal. The #3 drill point penetrates up to 1/4 in metal with no predrilling. Shank slot holds steel shavings and improves drilling action. Ideal for trailer beds and walls. All screws are 1000 hr salt spray test dacro-coated. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$54.99

Acorn International SW-MM1212G250 Screw, #12 Thread, Self-Drilling Thread, Hexagonal Head, Self Drill Point

Metal-to-metal screws are sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes a complete secure fastening in a single operation. Acorn International metal to metal screws have a #3 drill point for fastening sheets to purlins up to 1/4 in total thickness with no predrilling. #12-14 screws are 5/16 in across flats hex washer head and #14-14 screws are 3/8 in across flats hex washer head with assembled EPDM washer for easy driving and conformance to the metal surface for a secure and long-lasting seal. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$25.99

Acorn International SW-MM121G250 Screw, #12 Thread, Self-Drilling Thread, Hexagonal Head, Self Drill Point

Metal-to-metal screws are sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes a complete secure fastening in a single operation. Acorn International metal to metal screws have a #3 drill point for fastening sheets to purlins up to 1/4 in total thickness with no predrilling. #12-14 screws are 5/16 in across flats hex washer head and #14-14 screws are 3/8 in across flats hex washer head with assembled EPDM washer for easy driving and conformance to the metal surface for a secure and long-lasting seal. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$22.99

Acorn International SW-MM1412G250 Screw, #14 Thread, Hexagonal Head, Self Drill Point, Galvanized Steel

Metal-to-metal screws are sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes a complete secure fastening in a single operation. Acorn International metal to metal screws have a #3 drill point for fastening sheets to purlins up to 1/4 in total thickness with no predrilling. #12-14 screws are 5/16 in across flats hex washer head and #14-14 screws are 3/8 in across flats hex washer head with assembled EPDM washer for easy driving and conformance to the metal surface for a secure and long-lasting seal. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$37.99

Acorn International SW-MM141G250 Screw, #14 Thread, Self-Drilling Thread, Hexagonal Head, Self Drill Point

Metal-to-metal screws are sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes a complete secure fastening in a single operation. Acorn International metal to metal screws have a #3 drill point for fastening sheets to purlins up to 1/4 in total thickness with no predrilling. #12-14 screws are 5/16 in across flats hex washer head and #14-14 screws are 3/8 in across flats hex washer head with assembled EPDM washer for easy driving and conformance to the metal surface for a secure and long-lasting seal. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$29.99

Acorn International SW-MW15BG250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$22.99

Acorn International SW-MW15BN250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$22.99

Acorn International SW-MW15BR250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$22.99

Acorn International SW-MW15BW250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$22.99

Acorn International SW-MW15FG250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$22.99

Acorn International SW-MW15G250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$18.99

Acorn International SW-MW15LG250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$22.99

Acorn International SW-MW15LS250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$22.99

Acorn International SW-MW15MT250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$22.99

Acorn International SW-MW15SS250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 stainless steel metal to wood screws are sealing self-piercing tapping screws made from type 316 passivated stainless steel for roofing and siding applications in corrosive environments. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$49.99

Acorn International SW-MW15W250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$22.99

Acorn International SW-MW1BG250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$18.99

Acorn International SW-MW1BK250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$19.99

Acorn International SW-MW1BN250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$19.99

Acorn International SW-MW1CR250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$18.99

Acorn International SW-MW1FG250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$19.99

Acorn International SW-MW1G250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$16.99

Acorn International SW-MW1LG250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$19.99

Acorn International SW-MW1MT250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$19.99

Acorn International SW-MW1TP250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$18.99

Acorn International SW-MW1W250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$19.99

Acorn International SW-MW25G250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$25.99

Acorn International SW-MW25W250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$32.99

Acorn International SW-MW2BG250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$24.99

Acorn International SW-MW2BK250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$27.99

Acorn International SW-MW2BN250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$27.99

Acorn International SW-MW2BR250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$27.99

Acorn International SW-MW2BW250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$27.99

Acorn International SW-MW2CG250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$24.99

Acorn International SW-MW2FG250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$27.99

Acorn International SW-MW2G250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$22.99

Acorn International SW-MW2LG250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$27.99

Acorn International SW-MW2MT250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$27.99

Acorn International SW-MW2TP250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$24.99

Acorn International SW-MW2W250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hexagonal Head, Type 17 Point, Steel

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are powder-coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy-duty tear-off resealable bag, UPC-coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy-duty cardboard of uniform size and distinctive yellow color for better retail identity.
$27.99

Amerimax 84034 Gutter Rivet, 1-1/2 in L, Aluminum, 100

Used to connect gutter parts together and fasten other light-gauge metals. Theses rivets feature durable aluminum construction.
$7.59

Arrow 215 Staple, 7/16 in W Crown, 5/16 in L Leg, Steel, 0.03 ga Gauge, 1000, Pack

Arrow Staple, Crown Shape: Flat, Crown Width: 7/16 in, Leg Length: 5/16 in, Material Gauge: 0.03 ga, Steel, Package Type: Pack, Package Quantity: 1000, Suitable for: TT21, JT21CM, JT27 Tools
$3.79

Arrow 23G15-1K Pin Nail, 5/8 in L, 23 Gauge, Galvanized Steel, Round Shank

Arrow Pin Nail, Point Type: Chisel, Shank Type: Round, Material Gauge: 23, 5/8 in L, Galvanized Steel, Suitable for: PT23G Pin Nailer
$8.99

Arrow 23G20-1K Pin Nail, 13/16 in L, 23 Gauge, Galvanized Steel, Round Shank

Arrow Pin Nail, Point Type: Chisel, Shank Type: Round, Material Gauge: 23, 13/16 in L, Galvanized Steel, Suitable for: PT23G Pin Nailer
$9.99

Arrow 23G25-1K Pin Nail, 1 in L, 23 Gauge, Galvanized Steel, Round Shank

Arrow Pin Nail, Point Type: Chisel, Shank Type: Round, Material Gauge: 23, 1 in L, Galvanized Steel, Suitable for: PT23G Pin Nailer
$9.99

Arrow 256 Round Crown Staple, 5/16 in W Crown, 3/8 in L Leg, Steel, 1000, Pack

T25 staples feature a round crown design that secures wires without damaging them. The leading choice for low voltage wire applications, the T25 staple is an absolute boss when installing garage door openers, thermostat wire, doorbell wire, alarm systems and much more. Also works great on computer, CAT5/CAT6. RG6/RG9, COAX and phone cables. All Arrow T25 staples are made under strict quality controls at our Saddle Brook, NJ manufacturing plant.
$4.29

Arrow 354 Flat Crown Staple, 7/16 in W Crown, 1/4 in L Leg

For use in model P35 stapler (684.7818). Able to penetrate thicker paper stock or staple more pages together. 5040 staples per box.
$10.99

Arrow 600 Series 60430 Flat, 1/2 in W Crown, 1/4 in L Leg

For use in Swingline Desa 800, 800X, 900, 1000, 10060, 31600, 31800, 34201, 34301, 34302, 80000, 80020, Master Mechanic 174839, 345025, 136150, TRE-50MM, TRE-300MM, Sear's Craftsman 68477, 68478, 6843, 6846, 68642, 68423, 68471, 68481, Black & Decker 9701, 9700, STANLEY Parker TR70, TR75, TR80, TRE-50, TRE100, TRE300, Ace Hardware 27175, 22084 and 22087.
$2.99
;