Framing Angles & Anchors

View as Grid List
Sort by
Display per page

MiTek A3-TZ Framing Angle, 1-7/16 in W, 1-7/16 in D, 2-3/4 in H, Steel, Zinc

Eliminates toenailing and increases strength. Requires 10d x 1-1/2 in nails for installation. 1-7/16 in W1 x 1-7/16 in W2 x 2-3/4 in L, 18 ga. Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes.
$0.89

MiTek AC5-TZ Framing Angle, 1-5/16 in W, 2-3/8 in D, 4-7/8 in H, Steel, Zinc

For general-purpose reinforcements of many framing connections. G185 galvanized finish. Can be used in both new construction and retrofit applications. Staggered nail patterns reduce wood splitting and allows installation on both sides of the supported member. Triple zinc clips require 10d HDG or 16d HDG nails. Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes.
$3.08

MiTek AC7-TZ Framing Angle, 1-5/16 in W, 2-3/8 in D, 6-15/16 in H, Steel, Zinc

For general-purpose reinforcements of many framing connections. G185 galvanized finish. Can be used in both new construction and retrofit applications. Staggered nail patterns reduce wood splitting and allows installation on both sides of the supported member. Triple zinc clips require 10d HDG or 16d HDG nails. Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes.
$2.49

MiTek AC9-TZ Framing Angle, 1-5/16 in W, 2-3/8 in D, 8-7/8 in H, Steel, Zinc

For general-purpose reinforcements of many framing connections. G185 galvanized finish. Can be used in both new construction and retrofit applications. Staggered nail patterns reduce wood splitting and allows installation on both sides of the supported member. Triple zinc clips require 10d HDG or 16d HDG nails. Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes.
$4.05

MiTek BL4 Corner Brace, 4-13/16 in W, 1-1/4 in D, Steel, G90 Galvanized

Multi-purpose braces are designed to provide reinforcement for 90 deg wood-to-wood connections.
$4.99

MiTek BL6 Corner Brace, 6-9/16 in W, 1-1/4 in D, Steel, G90 Galvanized

Multi-purpose braces are designed to provide reinforcement for 90 deg wood-to-wood connections.
$6.49

MiTek CSH-TZ Concealed Stringer Hanger, 10 in W, 1-7/16 in D, Steel, Zinc

The CSH-TZ concealed stringer hanger provides a method of connecting a stair stringer with a hidden hanger. The seat of the hanger is adjustable to match the slope of the stair stringer. The reversible design allows the connector to be used on the left, right or interior stringers. The CSH-TZ may be used with USP's SCA stair angles for a complete, easy-to-use stair framing solution. .
$3.61

MiTek JA1 Framing Angle, 1-1/2 in W, 1-1/2 in D, 1-1/4 in H, Steel, G90 Galvanized

Used to strengthen framing in various applications or to support joists where stirrup style hangers cannot be installed. Requires 10d x 1-1/2 nails for installation. Meets ICBO, SBCCI, BOCA - NER 505; L.A. City RR25303, DSA PA-076; and Dade County, FL 98-0421.06 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. 16 ga.
$0.79

MiTek JA1-TZ Framing Angle, 1-1/2 in W, 1-1/2 in D, 1-1/4 in H, Steel, Zinc

Used to strengthen framing in various applications or to support joists where stirrup style hangers cannot be installed. Requires 10d x 1-1/2 nails for installation. Meets ICBO, SBCCI, BOCA - NER 505, L.A. City RR25303, DSA PA-076 and Dade County, FL 98-0421.06 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. 16 ga.
$0.99

MiTek JA3 50/CTN Framing Angle, 2-1/2 in W, 3 in H, 50, Carton

MiTek Framing Angle, 2-1/2 in W, 3 in H, 50, Carton
$3.38

MiTek KHL33 Joist Angle, 2-1/2 in W, 3-1/4 in D, Steel, USP Primer

Designed for heavy-duty reinforcement of 90 deg framing intersections. USP primer finish. Requires two 5/8 in bolts for installation. Meets ICBO 2725, L.A. City RR 25104. 7 Gauge.
$7.59

MiTek ML24-TZ Framing Angle, 2 in W, 4 in H, Steel, Zinc

ML angles are multi-purpose angles that install easily with USP's WS15 wood screws. The staggered fastener pattern allows for back-to-back installations.
$2.39

MiTek ML26-TZ Framing Angle, 2 in W, 6 in H, Steel, Zinc

ML angles are multi-purpose angles that install easily with USP's WS15 wood screws. The staggered fastener pattern allows for back-to-back installations.
$2.99

MiTek MP34 Framing Angle, 1-1/2 in W, 1-7/16 in D, 2-1/2 in H, Steel, G90 Galvanized

Use for joist/header installations. Does not have tabs. G90 galvanizing finish. Requires 8d x 1-1/2 nails. Meets SBCCI, BOCA - NER 505, ICBO 5736, DSA PA-076, Dade County, FL 01-0417.11 and L.A. City RR25303 codes. 18 ga.
$0.69

MiTek MP4F Framing Angle

MiTek Multi-Purpose Framing Angle, 485 lb Weight Capacity
$0.56

MiTek MP5-TZ Framing Angle, 2-1/4 in W, 2-1/4 in D, 4-5/8 in H, Steel, Zinc

May be field adjusted by hand from 0 to 135 deg, giving framers and do-it-yourselfers flexibility in applications. Bend angle only once. G90 galvanized finish. 10d HDG nails required for installation. Meets SBCCI, BOCA - NER 530, ICBO 5700, FL822, L.A. City RR 25337, DSA PA-06 codes.
$2.79

MiTek MP9-TZ Framing Angle, 2-1/4 in W, 2-1/4 in D, 6-7/8 in H, Steel, Zinc

May be field adjusted by hand from 0 to 135 deg, giving framers and do-it-yourselfers flexibility in applications. Bend angle only once. G90 galvanized finish. 10d HDG nails required for installation. Meets SBCCI, BOCA - NER 530, ICBO 5700, FL822, L.A. City RR 25337, DSA PA-06 codes.
$7.20

MiTek MPA1 Framing Angle, 1-1/2 in W, 1-7/16 in D, 4-1/2 in H, Steel, G90 Galvanized

Use for joist to header, rafter to plate, stud to plate or 1 in foam board installations. Achieves continuous load path in high wind and seismic resistant construction. Enables quick field adjustments for 2 and 3-way connections. Tabs enable two and three-way connections. Bend tabs only once. Requires 8d x 1-1/2 nails. Meets SBCCI, BOCA - NER 505, ICBO 5736, DSA PA-076, Dade County, FL 01-417.11 and L.A. City RR25303 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
$0.49

MiTek MPA1-GC Framing Angle, 1-1/2 in W, 1-7/16 in D, 4-1/2 in H, Steel, Gold

Use for joist to header, rafter to plate, stud to plate or 1 in foam board installations. Achieves continuous load path in high wind and seismic resistant construction. Enables quick field adjustments for 2 and 3-way connections. Tabs enable two and three-way connections. Bend tabs only once. Requires 8d x 1-1/2 nails. Meets SBCCI, BOCA - NER 505, ICBO 5736, DSA PA-076, Dade County, FL 01-417.11 and L.A. City RR25303 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
$2.39

MiTek MPA1-TZ Framing Angle, 1-1/2 in W, 1-7/16 in D, 4-1/2 in H, Steel, Zinc

Use for joist to header, rafter to plate, stud to plate or 1 in foam board installations. Achieves continuous load path in high wind and seismic resistant construction. Enables quick field adjustments for 2 and 3-way connections. Tabs enable two and three-way connections. Bend tabs only once. Requires 8d x 1-1/2 nails. Meets SBCCI, BOCA - NER 505, ICBO 5736, DSA PA-076, Dade County, FL 01-417.11 and L.A. City RR25303 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
$2.23

MiTek RT10 Hurricane Tie, 1-9/16 in W, 10-3/4 in H, Steel, G30 Galvanized

These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces.
$1.69

MiTek RT15-TZ Hurricane Tie, 1-9/16 in W, 2-5/8 in D, 5-1/4 in H, Steel, Zinc

These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces.
$1.23

MiTek RT16A Hurricane Tie, 5 in W, 6-1/2 in H, Steel, G30 Galvanized

These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces.
$3.49

MiTek RT16A-TZ Hurricane Tie, 5 in W, 6-1/2 in H, Steel, Zinc

These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces.
$4.99

MiTek RT3A Hurricane Tie, 1-7/16 in W, 1-7/16 in D, 4-1/2 in H, Steel, G30 Galvanized

These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces.
$0.69

MiTek RT7A-TZ Hurricane Tie, 1-1/2 in W, 1-1/2 in D, 6-1/2 in H, Steel, Zinc

These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces.
$0.75

MiTek SCA10-TZ Stair Angle, 10 in W, 1-3/8 in D, Steel, Galvanized

Stair angles simplify stair construction. There is no need to calculate and notch stair stringers. Stronger and safer than wood blocking and the angle and fasteners are hidden from view.
$7.99

MiTek SCA9-TZ Stair Angle, 9 in W, 1-3/8 in D, Steel, Galvanized

Stair angles simplify stair construction. There is no need to calculate and notch stair stringers. Stronger and safer than wood blocking and the angle and fasteners are hidden from view.
$5.99

MiTek ST1-TZ Mud Sill Anchor, 10 in H, Steel, Zinc

For securing mudsills and framing into concrete slabs or poured stem walls. Not for block installation or securing concrete sections together between cold joints. Features prevent base flange for proper anchoring into concrete. Use a minimum of 2 anchors per mudsill within 12 in of the end of each section. Meets NER 530 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
$1.49

MiTek TTA2-TZ Framing Angle, Steel, Zinc

An angle connects two 2X wood members at 90 deg angles, G185 galvanizing finish, requires eight USP LumberLok LL915 (#9 x 1-3/8 in L) wood screws not included.
$2.39

MiTek TTR-TZ U-Clip, Steel, Zinc

A clip connects a 2X wood member to the face of another wood member, 20 ga, G-185 galvanizing finish, requires six USP LumberLok LL915 (#9 x 1-3/8 in L) wood screws not included.
$1.69

MiTek WE44-TZ Wet Post Anchor, 3-3/8 in W, 3-1/2 in D, 4-3/4 in H, Steel, Zinc

Secures posts to concrete in light-duty and medium-duty applications such as patio covers, carports or decks. Formed, one-piece design includes embossing for additional lateral strength. Not for fence posts or other unrestrained (not fixed or fastened at top) applications. Not designed to resist overturning (moment) loads. Requires two 1/2 in HDG bolts or 12 HDG nails for fastening to post. Meets SBCCI, BOCA - NER 530 & NER 608, ICBO 5700, ICBO 2039, ICBO 5531, FL821, FL822, L.A. City RR 25337 and DSA PA-076 codes. For additional information including allowable loads and fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
$12.99

Simpson Strong-Tie ML210Z L-Angle, 2 in W, 10 in H, Steel, ZMAX

The ML angle combines strength and versatility through the use of Strong-Drive® SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
$21.99

Simpson Strong-Tie ML28Z L-Angle, 2 in W, 8 in H, Steel, ZMAX

The ML angle combines strength and versatility through the use of Strong-Drive® SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
$6.99
;