Grounding Products

View as Grid List
Sort by
Display per page

GB GGC-1508 Ground Clip, Zinc

Convenient grounding accessories include products suitable for most job requirements.
$3.99

GB GGP-1502 Grounding Pigtail, 12 AWG Wire, Copper, Green

GB offers a convenient grounding accessories line of products suitable for most job requirements. This grounding pig tail is made from #12 AWG stranded wire. One end is terminated with a bare fork terminal. The other end is a captured screw.
$2.99

Halex 16010B Ground Clamp, 10 to 2 AWG Wire, Zinc, Zinc

Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.
$1.99

Halex 36010 Ground Clamp, 10 to 2 AWG Wire, Bronze

Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.
$3.79

Halex 36020 Ground Clamp, 10 to 2 AWG Wire, Bronze

Wire size fits #10 to 2 AWG. Use to secure the grounding wire to a 1-1/4 to 2 in or 2-1/2 to 4 in pipe. Bronze. UL listed.
$8.99

Halex 93591 Ground Clamp, Bronze

Connects grounding wire to the grounding rod.
$2.59

Halex 93592 Ground Clamp, Bronze

Connects grounding wire to the grounding rod.
$4.79

nVent ERICO 611380UPC Grounding Rod, 1/2 in Dia Nominal, 8 ft L, Steel

Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1.
$11.99

nVent ERICO 615800UPC Grounding Rod, 5/8 in Dia Nominal, 10 ft L, Steel

Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1.
$19.99

nVent ERICO 615880UPC Grounding Rod, 5/8 in Dia Nominal, 8 ft L, Steel

Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1.
$13.99

nVent ERICO 815860UPC Grounding Rod, 5/8 in Dia Nominal, 6 ft L, Steel, Galvanized

Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel.
$8.99

nVent ERICO 815880UPC Grounding Rod, 5/8 in Dia Nominal, 8 ft L, Steel, Galvanized

Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel.
$11.99

nVent ERICO CP58 Ground Clamp, Clamping Range: 1/2 to 5/8 in, #10 to 2 AWG Wire, Silicone Bronze

Connects grounding wire to the grounding rod. UL and CSA listed for 1/2 in and 5/8 in ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded.
$2.79

nVent ERICO CWP1J Pipe Clamp, Clamping Range: 1/2 to 1 in, #10 to 2 AWG Wire, Silicone Bronze

Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy.
$4.59

nVent ERICO CWP1JU Pipe Clamp, Clamping Range: 1/2 to 1 in, #10 to 2 AWG Wire, Silicone Bronze

Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid to 2 stranded. UL listed.
$6.49

nVent ERICO CWP2J Pipe Clamp, Clamping Range: 1/4 to 1 in, #10 to 2 AWG Wire, Silicone Bronze

Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid to 2 stranded. UL listed.
$11.99

nVent ERICO EDS58 Drive Sleeve, Galvanized Stainless Steel, Copper

The driving head fits over the ground rod to protect the rod end from "mushrooming" as the ground rod is driven into earth.
$16.99

nVent ERICO EK16 Ground Clamp, Clamping Range: 1/2 to 1 in, #10 to 2 AWG Wire, Bronze

Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Conductor range from #10 (5.5 sq-mm) to #2 (25 sq-mm). UL listed.
$8.69

nVent ERICO IBTB Intersystem Bonding Termination Bar, Polymer

The Intersystem Bonding Termination (IBTB), part of the Vent nVent ERICO line of facility electrical protection products, is designed to meet the requirements of the 2008 NEC® Article 250.94 bonding for other systems. The IBTB is mounted adjacent to the meter base or service entrance equipment and is a convenient way to interconnect and terminate grounding conductors from telephone, CATV or radio and television antennas. The IBTB includes corrosion-resistant, stainless steel mounting hardware and is easily accessible for connection and inspection. The lay-in connection clamp (#6 to #2 AWG or 16 to 35 sq-mm) allows easy installation of the grounding electrode conductor in one continuous length, where possible. The polymeric base and housing is impact-resistant, UV-stabilized and meets UL® requirements for weatherability performance.
$13.99

nVent ERICO ZWP1J Pipe Clamp, Clamping Range: 1/2 to 1 in, #10 to #6 AWG Wire, Zinc

Bolted water pipe clamps made of zinc die-cast. Wire range 8 solid to 2 stranded. UL listed. Connects grounding wire to the grounding rod.
$2.99

RACO 975 Ground Clip, Steel, Green

For grounding switch and outlet boxes using non-metallic sheathed cables from #14 to 10.
$0.49

Siemens ECGB10 Ground Bar Kit, 10-Terminal, 14 to 4 AWG Wire, Aluminum/Copper

For equipment grounding provision. #14 to 4 AWG, 60/75 deg Celsius, Cu/A1.
$10.99

Square D PK12GTACP Ground Bar Kit, 12-Terminal, Aluminum

Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and UL listed.
$7.59

Square D PK7GTACP Ground Bar Kit, 7-Terminal, Aluminum

Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and UL listed.
$5.99

Square D PK9GTACP Ground Bar Kit, 9-Terminal, Aluminum

Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and UL listed.
$7.99

Zareba Fi-Shock A-7 Ground Rod, 5/8 in Dia Nominal, 6 ft L, Copper

Zareba Fi-Shock Ground Rod, Copper, Nominal Diameter: 5/8 in, 6 ft L, Package Size: 5, Package Type: Carton
$27.99