Joist Hangers

View as Grid List
Sort by
Display per page

MiTek 31-24 Truss Brace and Spacer, 25-1/4 in H, Steel, Galvanized

The Stabilizer™ truss brace and spacer provides temporary construction bracing in the roof and ceiling planes, as well as permanent lateral bracing for webs as specified by your truss engineering. The Stabilizer™ is easily installed by embedding the patented MII 20 teeth on the top flange straight into the edge of the truss member to be braced with a framing hammer. The side tabs are then secured by driving the teeth into the face of the truss member being braced.
$3.40

MiTek HUS179 Slant Joist Hanger, 9-1/8 in H, 1-1/2 in D, 1-13/16 in W, 2 in x 10 to 12 in, Steel, G90 Galvanized

Designed for medium load conditions. Extended 3 in deep seat provides enhanced truss bearing.
$6.26

MiTek JL210IF-TZ Joist Hanger, 8-1/4 in H, 1-1/2 in D, 1-9/16 in W, 2 in x 10 to 12 in, Steel, Zinc

Speed prongs designed to temporarily position hangers on headers for more convenient nail fastening. G-185 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes.
$3.59

MiTek JL26IF-TZ Joist Hanger, 4-1/2 in H, 1-1/2 in D, 1-9/16 in W, 2 in x 6 to 8 in, Steel, Zinc, Face Mounting

Speed prongs designed to temporarily position hangers on headers for more convenient nail fastening. G-185 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes.
$2.70

MiTek JL28IF-TZ Joist Hanger, 6-1/8 in H, 1-1/2 in D, 1-9/16 in W, 2 in x 8 to 10 in, Steel, Zinc, Face Mounting

Speed prongs designed to temporarily position hangers on headers for more convenient nail fastening. G-185 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes.
$4.59

MiTek JUS210 Slant Joist Hanger, 7-3/4 in H, 1-3/4 in D, 1-9/16 in W, 2 in x 10 to 12 in, Steel, G90 Galvanized

The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation.
$1.69

MiTek JUS210-2TZ Slant Joist Hanger, 9-1/8 in H, 2 in D, 3-1/8 in W, 2 in L x 10 to 14 in H, Steel, Zinc

The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation.
$4.97

MiTek JUS210-3 Slant Joist Hanger, 8-3/8 in H, 2 in D, 4-5/8 in W, 2 in L x 10 to 14 in H, Steel, Galvanized

The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation.
$5.69

MiTek JUS210-3TZ Slant Joist Hanger, 8-3/8 in H, 2 in D, 4-5/8 in W, 2 in x 10 to 14 in, Steel, Zinc

The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation.
$9.21

MiTek JUS210-TZ Slant Joist Hanger, 7-3/4 in H, 1-3/4 in D, 1-9/16 in W, 2 in L x 10 to 12 in H, Steel, Zinc

The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation.
$2.46

MiTek JUS24 Slant Joist Hanger, 3-1/8 in H, 1-3/4 in D, 1-9/16 in W, 2 in x 4 in, Steel, Galvanized

The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation.
$0.99

MiTek JUS24-TZ Slant Joist Hanger, 3-1/8 in H, 1-3/4 in D, 1-9/16 in W, 2 in x 4 in, Steel, Zinc, Face Mounting

The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation.
$0.99

MiTek JUS26 Slant Joist Hanger, 4-13/16 in H, 1-3/4 in D, 1-9/16 in W, 2 in L x 6 to 8 in H, Steel, Galvanized

The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation.
$1.19

MiTek JUS26-2 Slant Joist Hanger, 5-1/4 in H, 2 in D, 3-1/8 in W, 2 in L x 6 to 8 in H, Steel, Galvanized

The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation.
$2.39

MiTek JUS26-2TZ Slant Joist Hanger, 5-1/4 in H, 2 in D, 3-1/8 in W, 2 in L x 6 to 8 in H, Steel, Zinc

The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation.
$3.45

MiTek JUS26-TZ Slant Joist Hanger, 4-13/16 in H, 1-3/4 in D, 1-9/16 in W, 2 in x 6 to 8 in, Steel, Zinc

The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation.
$1.23

MiTek JUS28 Slant Joist Hanger, 6-5/8 in H, 1-3/4 in D, 1-9/16 in W, 2 in x 8 to 10 in, Steel, G90 Galvanized

The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation.
$1.39

MiTek JUS28-2 Slant Joist Hanger, 7-1/8 in H, 2 in D, 3-1/8 in W, 2 in L x 8 to 10 in H, Steel, Galvanized

The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation.
$2.99

MiTek JUS28-2TZ Slant Joist Hanger, 7-1/8 in H, 2 in D, 3-1/8 in W, 2 in x 8 to 10 in, Steel, Zinc, Face Mounting

The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation.
$4.67

MiTek JUS28-3TZ Slant Joist Hanger, 6-3/8 in H, 2 in D, 4-5/8 in W, 2 in L x 8 to 10 in H, Steel, Zinc

The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation.
$8.62

MiTek JUS28-TZ Slant Joist Hanger, 6-5/8 in H, 1-3/4 in D, 1-9/16 in W, 2 in x 8 to 10 in, Steel, Zinc

The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation.
$1.74

MiTek LSSH15-TZ Slope/Skew Hanger, 5-1/16 in H, 3 in D, 1-9/16 in (W1), 1-3/4 in (W2) W, Steel, G185 Galvanized

The LSSH Series connects rafters to ridge beams in vaulted roof structures. This Series is field adjustable to meet a variety of skew and/or slope applications. Slopes and skews 0 to 45 deg.
$9.99

MiTek RR Ridge Rafter Hanger, 3-3/8 in H, Steel, G90 Galvanized

The RR ridge rafter supports rafter pitches up to 7:12 (30 deg). Nesting top flange for back-to-back installation on 2X support beams.
$1.99

MiTek SKH26L-TZ Skewed Joist Hanger, 5-1/4 in H, 1-7/8 in D, 1-9/16 in W, 2 in x 6 to 8 in, Steel, Zinc

Standard stock 45 deg skew hanger for common standard lumber, engineered lumber and plated truss applications. Flexible design for 40 to 50 deg skew range. Meets ICC-ES ESR-1781, FL13285, L.A. City RR25843 and Dade County, FL 11-0510.01 codes.
$9.99

MiTek SKH26R-TZ Skewed Joist Hanger, 5-1/4 in H, 1-7/8 in D, 1-9/16 in W, 2 in x 6 to 8 in, Steel, Zinc

Standard stock 45 deg skew hanger for common standard lumber, engineered lumber and plated truss applications. Flexible design for 40 to 50 deg skew range. Meets ICC-ES ESR-1781, FL13285, L.A. City RR25843 and Dade County, FL 11-0510.01 codes.
$9.99

MiTek SKH28L Skewed Joist Hanger, 7-1/4 in H, 1-7/8 in D, 1-9/16 in W, 2 in x 8 to 12 in, Steel, G90 Galvanized

Standard stock 45 deg skew hanger for common standard lumber, engineered lumber and plated truss applications. Flexible design for 40 to 50 deg skew range. Meets ICC-ES ESR-1781, FL13285, L.A. City RR25843 and Dade County, FL 11-0510.01 codes.
$8.99

MiTek SKH28L-TZ Skewed Joist Hanger, 7-1/4 in H, 1-7/8 in D, 1-9/16 in W, 2 in x 8 to 12 in, Steel, Zinc

Standard stock 45 deg skew hanger for common standard lumber, engineered lumber and plated truss applications. Flexible design for 40 to 50 deg skew range. Meets ICC-ES ESR-1781, FL13285, L.A. City RR25843 and Dade County, FL 11-0510.01 codes.
$12.99

MiTek SKH28R Skewed Joist Hanger, 7-1/4 in H, 1-7/8 in D, 1-9/16 in W, 2 in x 8 to 12 in, Steel, G90 Galvanized

Standard stock 45 deg skew hanger for common standard lumber, engineered lumber and plated truss applications. Flexible design for 40 to 50 deg skew range. Meets ICC-ES ESR-1781, FL13285, L.A. City RR25843 and Dade County, FL 11-0510.01 codes.
$8.99

MiTek SKH28R-TZ Skewed Joist Hanger, 7-1/4 in H, 1-7/8 in D, 1-9/16 in W, 2 in x 8 to 12 in, Steel, Zinc

Standard stock 45 deg skew hanger for common standard lumber, engineered lumber and plated truss applications. Flexible design for 40 to 50 deg skew range. Meets ICC-ES ESR-1781, FL13285, L.A. City RR25843 and Dade County, FL 11-0510.01 codes.
$12.99

MiTek SUH44 Joist Hanger, 2-7/8 in H, 2 in D, 3-9/16 in W, 4 in x 4 in, Steel, G90 Galvanized, Face Mounting

Framing connectors for floor systems, deck projects, other joist to header applications and for light truss applications. Speed prongs designed to temporarily position hangers on headers for more convenient nail fastening. 16 ga steel construction. G90 galvanizing finish. Meets ICC-ES ESR-1280, FL11664 and L.A. City RR25749 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
$4.79

MiTek TFL2595 Joist Hanger, 9-1/2 in H, 2 in D, 2-1/2 in W, 2-1/2 in x 9-1/2 in, Steel, G90 Galvanized

Features 1-1/2 in top flange depth that accommodates all header types as well as back-to-back installations. Also features USP's patented Seat Cleat® for quick, positive seating.
$4.99

MiTek THD410 Truss Hanger, 9-1/16 in H, 3 in D, 3-5/8 in W, 3-1/2 in x 9-1/4 to 14 in, Steel, G90 Galvanized

Medium capacity hanger for LVL, LSL and PSL beams; drive bend line nails into header at 45 deg to achieve listed loads; G90 galvanizing finish. Codes: ESR-1781, ESR-1881, FL821, FL9835, FL13285, Dade County FL 06-0921.05, L.A. City RR 25779 and L.A. City RR 25843.
$14.27

MiTek THD414 Truss Hanger, 12-7/8 in H, 3 in D, 3-5/8 in W, Steel, Galvanized, Face Mounting

Medium-to-heavy capacity face mount hanger. Some THD models are available with a Min/Max installation option.
$42.27

MiTek THDH610 Truss Hanger, 9 in H, 4 in D, 5-1/2 in W, Steel, Galvanized, Face Mounting

The THDH are high capacity face mount hangers designed for truss-to-truss and structural composite lumber (LVL, PSL and LSL) connections.
$94.79

MiTek THF23925 I-Joist Hangers, 9-3/16 in H, 2-1/2 in D, 2-5/16 in W, 2-5/16 x 9-1/2 in, Steel, G90 Galvanized

Designed to provide lateral support for the top chords of I-joists in depths up to 16 in. Eliminates the need for web stiffeners in most applications.
$4.59

MiTek THF25112 I-Joist Hanger, 11-1/8 in H, 2-1/2 in D, 2-1/2 in W, 2-1/2 x 11-7/8 in, Galvanized Steel

Designed to provide lateral support for the top chords of I-Joists in depths up to 16 in. G90 galvanizing finish. Meets ICC-ES ESR-1781, FL13285 and L.A. City RR25843 codes. Install 10d x 1-1/2 in nails into joist through raised dimple at 45 deg angle. For THF Min, fill all round nail holes. For THF Max, fill all round and diamond holes. For information including allowable loads and number of fasteners, please see USP lumber connectors charts in the Orgill paper catalog R7 reference pages. For additional sizing information, visit www.uspconnectors.com.
$4.99

MiTek THF25140 I-Joist Hangers, 13-7/16 in H, 2-1/2 in D, 2-1/2 in W, 2-1/2 in x 14 in, Steel, G90 Galvanized

Designed to provide lateral support for the top chords of I-joists in depths up to 16 in. Eliminates the need for web stiffeners in most applications.
$5.99

MiTek THF25925-2 I-Joist Hangers, 8-3/16 in H, 2-1/2 in D, 5-1/8 in W, 5 in x 9-1/4 to 11-7/8 in, Steel

Designed to provide lateral support for the top chords of I-joists in depths up to 16 in. Eliminates the need for web stiffeners in most applications.
$22.06

MiTek THO25118-2 Hanger, 11-7/8 in H, 3 in D, 5-1/8 in W, Steel, Galvanized, Top Mounting

Engineered for I-Joist to header applications. Offers full lateral support of the I-Joist top chord, eliminating the need for web stiffeners in most applications. Raised dimple nailing guides help assure correct 45 deg nailing into the I-Joist bottom flange. The THO's feature the patented seat cleat that allows for quick, positive seating. The seat cleat will hold the I-Joist in place, eliminating spring back during nailing in the bottom flange.
$14.41

MiTek TTF22-TZ Bracket, 4-1/4 in H, 10 in D, Steel, Zinc

MiTek Bracket, Wood Screw Fastener, #9 x 1-3/8 in L Fastener, Steel, Zinc, 4-1/4 in H, 10 in D
$5.25

MiTek TTU2-TZ U-Clip, Steel, Zinc

MiTek U-Clip, Wood Screw Fastener, #9 x 1-3/8 in L Fastener, Steel, Zinc
$0.88
;