The LeveLok® is one of the easiest to use ladder levelers in the market. It can be installed on almost any fiberglass or aluminum extension ladder and can be operated using only your foot - freeing your hands to hold the ladder.
The Safe-T ladder extension system is designed to attach to the top of a ladder to provide a safe and easy transition from the ladder to a raised surface. It requires no tools, drilling or bolting to install and is one of the most effective means of improving the safety of nearly any ladder. Once installed, it provides 2 offsetting handrails that offer a point of walk-through to step on or off the ladder. This patented piece of equipment assists workers in complying with OSHA standard 1926.1053(b), which states, "When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 ft above the upper landing surface to which the ladder is used to gain access." The Safe-T ladder extension is incredibly simple to use, tightens onto a ladder by hand and will never scratch or damage the ladder to which it is attached. The unit has a safety latch that prevents it from slipping off the ladder, it is specially designed with cushioned bumper pads to help protect the eave of the roof and its hand grips help ensure maximum safety.
The ladder stability anchor functions to clamp to a roof and then secure to the top rung of a ladder with either 2 or 3 ft long Velcro straps, ensuring that the ladder will not fall or move. It is composed of lightweight aluminum for superior durability and requires no special tools to install. The ladder stability anchor shall be secured at its top to a rigid support that will not deflect.
The guardian fall protection 2-rung ladder jack is MIG welded and possesses a riveted construction for excellent strength and durability. It is setup over 2 consecutive ladder rungs, can be used on either side of a ladder and is ideal for painting, siding and repair applications. This jack is easy to both install and remove and will even accommodate planking up to 18 in wide when used in combination with a paired Ladder Jack and installed and used in accordance with all applicable OSHA regulations.
MIG welded and riveted construction. Will work on either inside or outside ladder face. Will accommodate up to 18 in wide plank. Adjustable to fit round or D-Rung ladders. Complies with OSHA requirements.
The guardian fall protection ladder hook provides an ideal method of securing the top of a ladder to a rooftop. When used with a paired ladder hook, both hooks fit over the top two rungs of the ladder and hook over the roof edge. Then the wing nuts of both hooks are tightened, holding the ladder firmly in place. These hooks are designed to fit single or extension ladders and are made from powder-coated steel for excellent durability and strength.
The AC19 extension ladder covers help prevent damage to support surfaces. Designed to snap over extension ladder rail end caps. Resists paints, stains, thinners and solvents. Can be used on all single and extension fiberglass and aluminum ladders.
The AC27-P lock-in paint cup is great for trim painting and cut-in applications. With a built-in magnet to secure a paint brush, the paint cup holds 1 qt of paint. For use on ladders that include lock-in system sockets, it can be used with disposable paint cup liner AC27-L.
The AC50-JB-3 lock-in job bucket increases your work space with 600 cu-in of storage right at your fingertips. With the lock-in system, the job bucket fits right into the ladder top customizing your work space. Integrated tape measure and screwdriver holders are features of the job bucket along with top grooves to hold round pipes in place. Great for all trades like electrical, maintenance, plumbing and construction.
The AC52-UB lock-in utility bucket expands your work surface and customizes your ladder top. Great for on the jobsite or household use. The utility bucket locks securely into the ladder top and is ideal for wet or dry applications. Holds up to 1 gal of liquid and has a 25 lb capacity. Integrated Lock-In System?? socket on the bucket allows for an additional paint cup (AC27-P), Tool Lasso?? or utility hook (AC56-UH). Increases productivity by saving trips up and down the ladder.
The AC54-JC lock-in job caddy expands your work surface and customizes your ladder top. Holds large or odd shaped items like fluorescent bulbs or ceiling fan blades. There are four storage compartments to keep small parts separated. Holders for screwdrivers, pliers, putty knives and towels. End hook is built in for increased convenience. There is also an integrated Lock-In System?? socket for adding an additional paint cup (AC27-P), Tool Lasso?? or utility hook (AC56-UH).
The AC56-UH lock-in utility hook keeps cords from getting tangled in your ladder. Locks securely into ladder top or other Lock-In System?? accessories such as the job caddy or utility bucket. organize cords and keep them within reach. Utility hook holds extension cords, air hoses, garden hoses, strands of lights, paint sprayers and other tools or project materials.
The AC58-TL lock-in Tool Lasso?? secures tools while on the job. Tool Lasso?? wraps around the grip of power tools, hand tools and caulk guns and locks securely into ladder top or lock-in System?? socket on other accessories such as the job caddy or utility bucket. Having tools within reach saves trips up and down the ladder increasing productivity. compatible with the Tool Lasso?? belt clip.
The AC78 QuickClick??? stabilizer spans 44 in and provides a standoff of 10 in. Requires no tools to attach to ladder. Spring-loaded locking latch makes it easier and quicker to install and remove than any other stabilizer on the market. Mar-resistant rubber end caps protect the work surface. Paint can hook is included.
The AC96 aluminum stabilizer spans 47 in and provides a standoff of 10 in. For use on aluminum ladders of all duty ratings. Mar-resistant rubber end caps protect the work surface. Paint can hook included. Ideal for stabilizing the M1 Series multiladders when in scaffold or stairway positions.
PK76-9 Universal pail shelf has a two-piece, SPILL-PROOF??, rugged construction and fits on fiberglass stepladders and aluminum 400 Series stepladders. Aluminum arms and built in rag rack. Comes with mounting hardware and instructions.
The PK80-2 Level-Master?? automatic ladder leveler easily attaches to WERNER fiberglass and aluminum extension ladders to level ladder on uneven surfaces. For use on fiberglass ladder Series D5900, D6000, D6200, 7100 and D7100 (all lengths). For use on aluminum ladder Series D1100, D1200, D1300, D1500 and D500 (all lengths).