With overload protection on all ranges, 3.75 digital liquid crystal display (LCD), maximum reading 3999. Maximum 450 V. Range hold, continuity, diode test. Built-in test leads, 2X per second sampling rate. Auto-power off after approximately 10 mins. Operating environment 32 to 104 deg F. Storage temperature -4 to 140 deg F. 300 hrs typical life with carbon zinc batteries. Operates from (2) LR44 batteries, included. C-77 booklet style carrying case and operating instructions included. cULus Listed to both US and Canadian standards. Meets CE requirements. 4-1/4 in H x 2-1/4 in W x 1/2 in D.
The DSA500A Sperry instruments snap-around clamp meter is a 5 function, 9 range auto-ranging unit engineered to measure ac current (40 to 400 A), AC/DC voltage (400/600 V), resistance (400/4000 A) and continuity. Similar to digital multimeters, clamp meters offer a large range of functions and include LED screens to display results but they offer the additional unique ability to measure current without having to contact live conductors. This unit features a data-hold switch to maintain the reading on the liquid crystal display (Maximum count of 3999) and auto power-off functionality to extend battery life with a low batter indicator to ensure you won't get incorrect readings due to low batteries. Audible beeper permits easy continuity check (buzzer sounds at 100 Ohms or less). We consider safety first; this instrument has been designed and tested according to IEC publication 61010 and integrates features such as voltage, current and resistance overload protection and shrouded transformer jaws to further improve safety. This compact, lightweight, yet durable unit measures: 7.24 in L x 1.73 in W x 1 in D and weighs 42 lb (184 mm L x 44 mm W x 27 mm D (190 g)) including batteries. Unit includes test leads, two AAA batteries, an instruction manual and a soft sided carry case with belt loop. cULus and CE certified with a Cat II rating at 600 V and Cat III rating at 300 V.
The Gardner Bender GCM-500 clamp-on analog multimeter is a 4 function, 8 range manual-ranging tester engineered to measure AC Current (600 A), AC/DC Voltage (600/60 V) and resistance (1000 Ohm). Similar to standard analog multimeters, clamp meters offer a large range of functions with the additional unique ability to measure current without having to contact live conductors. This tester includes a 1-1/2 in jaw size with the lockjaw feature that prevents misuse by only allowing the jaws to open in the amps mode. Unit also offers an 8 position smooth rotary dial, 0 Ohm adjustment dial and a data hold switch to maintain the reading on the easy to read display. Unit meets Cetus agency approvals, is fuse and diode protected and includes a calibration screw. Tester provides a 3 ft drop and 150 lb crush rating as well as a 1 year warranty and includes both test leads and operating instructions in the package. Gardner bender offers over 50 years of experience making professional electrical testers, tools and supplies so you can count on us to provide quality performing products for professional and DIY use.
When you're ready to add a multimeter to your toolbox this unit is a great place to start. This tester is designed to work on most household appliances and is equipped with an easy to read 3-1/2 in digital display and three testing functions - AC voltage to 500 V, DC voltage to 600 V and resistance to 2 mOhm. The 11 position manual ranging smooth rotary style achieves precise readings and the low battery indicator ensures an accurate read-out. Durable housing is drop-resistant to 3 ft and crush-rated to 150 lb. Tester is rated Cat III 600 V. Unit comes pre-packaged with secure-fitting 26 in test leads and operating instructions.
When you contemplate adding a multimeter to your toolbox this Gardner Bender auto-ranging unit makes the decision easy. Equipped with an easy to read 3-1/2 in backlit LCD digital display and magnetic holding strap making this tester ideal for automotive, appliance, circuit breaker and other hands-free applications. In addition the multimeter features rubber housing to promote a steadfast comfortable grip while wrap-around lead holders keep leads at the ready. Snap-in probes spaced to fit a standard outlet provide quick and easy testing with one hand. Engineered with seven testing functions - AC voltage to 500 V, DC voltage to 600 V, resistance to 20 mOhm, diode, continuity (includes audible indication), temperature probe (-40 to 1832 deg F) and battery testing for 1.5 V batteries. The seven-position auto-ranging smooth rotary style achieves precise readings and the low battery indicator with auto-off function ensures an accurate read-out. Durable housing with a rubber boot is drop-resistant to 6 ft and crush-rated to 150 lb. Tight and secure input jacks keep the included 26 in test leads fixed firmly in place during testing. Unit comes pre-packaged with leads, a magnetic attachment strap for hands-free operation and user manual. Tester is rated Cat III 600 V.
Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Pocket sized analog tester. Tests voltage, DC voltage, DC current, resistance, continuity and batteries.
This multifunctional analog multimeter was designed for the homeowner, hobbyist or professional needing to make electrical and electronic equipment measurements. Capable of measuring 6 functions on 14 ranges on it is easy to read color-coded analog display you'll find yourself reaching for this handy unit almost every time. Unit tests AC and DC voltage of 10-50-250 and 500 V, DC current 250 mA, up to 50K of resistance, -20 to +56 dB decibels on AC voltage ranges and common household batteries from 1.5 V thru 9 V. Unit includes built-in 0 Ohm adjustment dial allowing you to reset prior to resistance testing and to perform internal battery test function. Unit incorporates fuse overload protection circuitry to protect the user and a mirror scale is provided to reduce the possibility of parallax errors. Ships with test leads and a tri-lingual instruction manual and includes a 1 year warranty. Common measurements with this unit include - testing household batteries for charge level, troubleshooting various low voltage circuits, testing wall receptacles for proper voltage and grounding and troubleshooting electrical cords, stings of lights, fuses and switches to determine if they are operating properly or if a break in the circuit exists and the item in question needs to be repaired or replaced. The decibel feature of this multimeter is used for transistor gain measurement in electronic circuits and should not be confused with audio decibels.
Clip strip and S-hook package - you'll find yourself reaching for this multi-purpose tester well beyond the holiday season. Engineered with both a handy bulb pulling tool on the end to assist in removing the bulb from the string and a simple push in to test bulb tester on the back this tool tests both LED and incandescent light-string bulbs. Then, with the flip of a switch, the bulb tester becomes a fuse tester making troubleshooting a blown fuse quick and easy. The tools main function as an adjustable sensitivity non-contact voltage tester can be used year-round to test for the presence of AC voltage prior to working on any electrical project. The sensitivity adjustment component allows you to detect low voltage from only 12 VAC to up to 600 VAC, for standard residential connections. Because it's non-contact you never risk touching live wires in order to determine the presence of voltage and the unit provides both a 360 deg bright red light and an audible beeping indication of the presence of voltage. Comfortable rubber over-molding provides slip-resistant grip with intuitive placement of the voltage sensitivity wheel near the thumb for ease of use. And designed with multi-purpose features to make your life easier. you'll use this tool for years to come. Requires 2 LR44 button cell batteries for operation.
The ToolSmart™ digital multimeter reads voltage, current, resistance, temperature and more with turn of the dial. It also allows a smartphone to serve as a second viewing screen in case conditions are dark or there is more than one person on the job. All data goes directly from the meter to the free ToolSmart™ smartphone app.
Use to measure voltage and check batteries, measure current of small electronic circuits. 600 VAC/VDC voltage. Resistance measurement. 1.5 V/9 V battery test. Continuity and diode tests. Built-in test leads and a rubber boot to protect meter from damage. 9 V battery included. Measurement category Cat III, 600 V. ETL approved.
For most electrical needs. 600 VAC/VDC voltage test, 10 AC/DC amperage measurement. Temperature testing with thermocouple rated -58 to 400 deg F (-50 to 204 deg C). Continuity, diode, duty cycle and frequency testing. Resistance and capacitance measurement. Includes hold, relative reading, backlight, automatic power off and field replaceable fuses. 9 V battery included. Measurement category Cat III, 600 V. ETL approved.