Panel Boxes, Disconnects, Meters & Switches

View as Grid List
Sort by
Display per page

Cutler-Hammer AC Series ACD221RNMP Disconnect Switch, 30 A, 240 V

Single phase, 2 pole, 2 wire, 240 VAC, non-metallic enclosure. Rated 1-1/2 hp at 120 V, 3 hp at 240 V with time delay fuses (uses class H cartridge fuses, not included). For top and bottom entry and exit, with provision for type H conduit hub. Heavy-duty, high strength, rugged polymer enclosure with UV-resistant features. 10,000 A RMS symmetrical interrupting rating. Suitable for use as service entrance equipment with ground bar. No GB4 ground bar and No 360-011-24 pullout head replacement sold separately. #14-2 AWG wire range. 5 in x 8.63 in x 3-1/2 in. UL listed file No E5239.
$25.99

Cutler-Hammer BR Series BR1224L200R Load Center, 200 A, 12-Space, 24-Circuit, Main Lug, NEMA 3R Enclosure

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to add circuits to existing service. The main breaker protects the main entire panel and can be used as a service disconnect. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets.
$99.99

Cutler-Hammer BR Series BR2040L200G Load Center, 200 A, 20-Space, 40-Circuit, Main Lug, NEMA 1 Enclosure

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to add circuits to existing service. The main breaker protects the main entire panel and can be used as a service disconnect. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets.
$99.99

Cutler-Hammer BR Series BR24L125RP Load Center, 125 A, 2-Space, 4-Circuit, Main Lug, NEMA 3R Enclosure

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to add circuits to existing service. The main breaker protects the main entire panel and can be used as a service disconnect. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets.
$34.99

Cutler-Hammer BR Series BR24L70FP Load Center, 70 A, 2-Space, 4-Circuit, Main Lug, NEMA 1 Enclosure, Light Gray

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to add circuits to existing service. The main breaker protects the main entire panel and can be used as a service disconnect. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets.
$17.99

Cutler-Hammer BR Series BR24L70SP Load Center, 70 A, 2-Space, 4-Circuit, Main Lug, NEMA 1 Enclosure, Light Gray

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to add circuits to existing service. The main breaker protects the main entire panel and can be used as a service disconnect. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets.
$17.99

Cutler-Hammer BR Series BR48L125RP Load Center, 125 A, 4-Space, 8-Circuit, Main Lug, NEMA 3R Enclosure

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to add circuits to existing service. The main breaker protects the main entire panel and can be used as a service disconnect. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets.
$32.99

Cutler-Hammer BR Series BR816L125RP Load Center, 125 A, 8-Space, 16-Circuit, Main Lug, NEMA 3R Enclosure

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to add circuits to existing service. The main breaker protects the main entire panel and can be used as a service disconnect. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets.
$49.99

Cutler-Hammer CH Series CH2L70RP Load Center, 70 A, 2-Space, 4-Circuit, Main Lug, NEMA 3R Enclosure

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to add circuits to existing service. The main breaker protects the main entire panel and can be used as a service disconnect. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets.
$39.99

Cutler-Hammer DG221NGB Safety Switch, 2-Pole, 30 A, 240 V

Steel enclosure. 2-pole, 3-wire, 2 blades, 2 class H cartridge fuses (not included), solid neutral, 120/240 VAC. Rated 1-1/2 to 3 hp single phase, 3 to 7-1/2 hp 3-phase at 240 V only when dual element fuses are used. For residential and commercial applications. Suitable for light duty motor circuits and service entrance. For use on systems capable of delivering up to 10,000 rms, symmetrical fault current. Bolt on hub provided. DS100GK ground kit sold separately. 6-1/6 in x 7-1/2 in x 6-3/4 in. UL listed file No.E5239; meets UL98 for enclosed switches and NEMA standard KS1.
$35.99

Cutler-Hammer DP Series DPB222RP Disconnect Switch, 60 A, 240 V, Gray

Air conditioning disconnect, molded case switch looks like a circuit breaker but operates like an ordinary household light switch. 60 A, 2-pole, 240 VAC. Metallic, galvanized steel enclosure, NEMA 3R, rainproof. Packaged for retail sale. Wire size range Cu or Al at 60 or 70 deg C, #14-3. UL listed, CSA approved.
$29.99

Cutler-Hammer DP Series DPU222RP Disconnect Switch, 60 A, 120/240 V, Gray

An air conditioning disconnect (ACD) is a disconnect located between the load center and the air conditioner. Eaton's ACD provides an installer or repair personnel with a visible disconnecting means when performing maintenance.
$10.99

Cutler-Hammer MBE24L125BTS Meter Breaker, 125 A, 2-Space, 4-Circuit, Main Lug, NEMA 3R Enclosure

A meter breaker is service entrance equipment that consists of a single meter socket and load center (circuit breaker distribution section) or meter socket and main breaker combined in one enclosure. Sometimes called combos, all-in-ones, meter centers or meter mains these units are increasing in popularity as the socket and load center or main breaker are located in one location, thus providing the contractor with a labor and material savings when installing.
$67.99

Cutler-Hammer UGHTRS213BE Meter Socket, 1-Phase, 200 A, 600 V, 5-Jaw, 1-Socket

Single meter socket, ringless, horn bypass, 5 terminals, 200 A, 600 VAC, OH/UG service, hub provision only, grounded fifth terminal, service ground lug #14-2 Cu/Al. Wire size range 1/0-350. UL labeled. 16 x 12 x 6 in. Suitable for either top or bottom service cable entry.
$97.99

GE Industrial Solutions GE1LM532ES Metered Earth Burial Pedestal, 100 A, 120, 240 V, Plug-In Mounting

General electrics metallic RV units are manufactured using 16 ga, galvanized zinc coated steel and NEMA 3R construction, which resists corrosion and fading and provides lasting service in outdoor applications.
$299.99

GE Industrial Solutions GE1LU532SS Unmetered RV Outlet Box, 100 A, 120, 240 V, Surface Mounting

General electrics metallic RV units are manufactured using 16 ga, galvanized zinc coated steel and NEMA 3R construction, which resists corrosion and fading and provides lasting service in outdoor applications.
$199.99

GE Industrial Solutions PowerMark Gold TL Series TL240RCUP Load Center, 40 A, 2-Space, 4-Circuit, Main Lug

PowerMark Gold load centers lower your costs by making installation faster and easier, increasing application flexibility and reducing inventory requirements. At the same time, they deliver obvious and significant advances in design, function and quality.
$34.99

GE Industrial Solutions PowerMark Gold TLC812SCU Convertible Load Center, 125 A, 8-Space, 16-Circuit, Main Lug

GE Industrial Solutions PowerMark Gold Convertible Load Center, 120, 240 V, 125 A, Number of Phases: 1, Number of Spaces: 8, Number of Circuits: 16, Breaker/Load Center Type: Main Lug, Cable Size: 14-4 AWG, Wiring Configuration: 3-Wire, Bus Bar Material: Copper, Cover/Lid Type: Surface, Plug Mounting, Galvanized
$59.99

GE Industrial Solutions PowerMark Gold TLM Series TLM1212CCUP Load Center, 125 A, 12-Space, 24-Circuit, Main Lug

PowerMark Gold load centers lower your costs by making installation faster and easier, increasing application flexibility and reducing inventory requirements. At the same time, they deliver obvious and significant advances in design, function and quality.
$42.99

GE Industrial Solutions PowerMark Gold TLM Series TLM1212RCUP Load Center, 125 A, 12-Space, 24-Circuit, Main Lug

PowerMark Gold load centers lower your costs by making installation faster and easier, increasing application flexibility and reducing inventory requirements. At the same time, they deliver obvious and significant advances in design, function and quality.
$77.99

GE Industrial Solutions PowerMark Gold TLM Series TLM812FCUDP Load Center, 125 A, 8-Space, 16-Circuit, Main Lug

PowerMark Gold load centers lower your costs by making installation faster and easier, increasing application flexibility and reducing inventory requirements. At the same time, they deliver obvious and significant advances in design, function and quality.
$37.99

GE Industrial Solutions PowerMark Gold TLM Series TLM812RCU2P Load Center, 125 A, 8-Space, 12-Circuit, Main Lug

PowerMark Gold load centers lower your costs by making installation faster and easier, increasing application flexibility and reducing inventory requirements. At the same time, they deliver obvious and significant advances in design, function and quality.
$44.99

GE Industrial Solutions PowerMark Gold TLM Series TLM812SCUD1K Load Center, 125 A, 8-Space, 16-Circuit

PowerMark Gold load centers lower your costs by making installation faster and easier, increasing application flexibility and reducing inventory requirements. At the same time, they deliver obvious and significant advances in design, function and quality.
$37.99

GE Industrial Solutions PowerMark Gold TM Series TM2010CCU2K Load Center Pack, 100 A, 20-Space, 20-Circuit

PowerMark Gold load centers lower your costs by making installation faster and easier, increasing application flexibility and reducing inventory requirements. At the same time, they deliver obvious and significant advances in design, function and quality.
$82.99

GE Industrial Solutions PowerMark Gold TMC2410CCA2K Load Centre Kit, 100 A, 24-Space, 48-Circuit

GE Industrial Solutions PowerMark Gold Load Centre Kit, 120, 240 V, 100 A, Number of Phases: 1, Number of Spaces: 24, Number of Circuits: 48, Interrupt Rating: 22 kA, Bus Bar Material: Copper, Includes: (10) 1-Pole 15 A, (3) 2 Pole 15 A, (1) 2 Pole 30 A, (1) 2 Pole 40 A Breakers
$199.99

GE Industrial Solutions TG3221R Safety Switch, 2-Pole, 30 A, 240 V

Designed for residential or light commercial applications where duty is not severe. Meets or exceeds NEMA Enclosed Switch Standard KS1-1983 for type GD, CSA certified; 60 deg C/75 deg C conductor rating. Two pole, 120/240 VAC; 250 VDC. Removable closing cap. Accepts Class H fuses (not included). Feature quick make, quick break mechanism. Suitable for use as service entrance equipment when installed in accordance with National Electrical Code. 6-7/8 in x 9-7/8 in x 3-5/16 in. UL listed (Enclosed Switches No. 98).
$64.99

GE Industrial Solutions TM2010CCU Loadcenter, 100 A, NEMA 1 Enclosure, Flush, Surface Mounting

GE load centers lower your costs by making installation faster and easier and by increasing application flexibility. At the same time, they deliver obvious and significant advances in design, function and quality.
$77.99

GE Industrial Solutions TM2020CCUPL5 Contractor Loadcenter Kit, 1-Pole, 200 A, NEMA 1 Enclosure

GE load centers lower your costs by making installation faster and easier and by increasing application flexibility. At the same time, they deliver obvious and significant advances in design, function and quality.
$149.99

GE Industrial Solutions TM3220RCUB2K Loadcenter, 200 A, NEMA 3R Enclosure

GE load centers lower your costs by making installation faster and easier and by increasing application flexibility. At the same time, they deliver obvious and significant advances in design, function and quality.
$169.99

GE Industrial Solutions TPM60R1CP/TPN60R1 Disconnect Switch, 60 A, 120/240 V

Suitable for use as service entrance equipment. Removable closing cap not included. Equipment ground. 14-3 AWG lug wire range. Designed to comply with code requirements for disconnecting central air conditioners and heat pumps. Open sides and top for quick installation. Impact and corrosion-resistant GE Noryl thermoplastic resin. 2-pole, 3-wire, 120/240 VAC, rated 10 hp. 5-3/4 in x 8 in x 3-1/8 in. UL1429 enclosed pullout switch, UL Listed.
$17.99

RELIANCE CONTROLS PB30 Power Inlet Box, 30 A, 125/250 V, Gray

The raintight NEMA 3R power inlet box is designed for the use with the Pro/Tran transfer switches and Reliance® panel or link manual transfer panels and generator-ready load centers. The power inlet box may be installed indoors or outdoors in an open area where the generator is being used. Using one of the four combination 1/2 in and 3/4 in knockouts (one on each side, bottom and back) the power inlet box can be wired directly to the transfer switch or panel. The exclusive patented design provides generous wiring space and facilitates rough-in. The PR Series includes circuit breakers that match the amperage of the power inlet. UL listed. The raintight NEMA 3R PBN Series non-metallic power inlet box is designed for use with the Pro/Tran transfer switches and panel or link manual transfer panels and generator-ready load centers. This power inlet box must be installed outdoors in an open area where the generator is being used. Using one of the three 3/4 in knockouts (one each on the sides and back) the power inlet box can be wired directly to the transfer switch or panel. The patented design provides over 100 cu-in of wiring space and the slide-out base allows easy 360 deg access to the flanged inlet.
$57.99

RELIANCE CONTROLS Pro/Tran 2 Series 510C Transfer Switch, 1-Phase, 50 A, 120 V, 15-Circuit, Surface Mounting

The Pro/Tran 2 is the next generation of Loadside™ manual transfer switch by Reliance Controls. These indoor surface mount transfer switches are designed for fast installation in residential and commercial applications. The 16 in flexible conduit whip attaches easily to a knockout on the load center and all factory wires are clearly marked and colored for identification. Simply select the circuits needed in an emergency and connect them to the Pro/Tran two wire leads as instructed in the manual.
$399.99

RELIANCE CONTROLS Pro/Tran 30216A Transfer Switch, 1-Phase, 60 A, 120/250 V, 7-Circuit, 6-Breaker

These indoor surface mount transfer switches are designed for fast installation in residential and commercial applications. The 18 in flexible conduit whip attaches easily to the load center and all wires are clearly marked. Simply select the circuits needed in an emergency and connect them to the Pro/Tran wire leads.
$269.99

RELIANCE CONTROLS Pro/Tran 31406CRK Transfer Switch Kit, 1-Phase, 60 A, 120/250 V, 7-Circuit, 6-Breaker

These indoor surface mount transfer switches are designed for fast installation in residential and commercial applications. The 18 in flexible conduit whip attaches easily to the load center and all wires are clearly marked. Simply select the circuits needed in an emergency and connect them to the Pro/Tran wire leads.
$329.99

Siemens E1020MB1100FCGP Loadcenter, 100 A, 20-Circuit, NEMA 1 Enclosure, Plug-In Mounting

Single phase, 3-wire, 10 spaces/20 circuits, 120/240 V. 22,000 AIR. Use for older home renovation projects where the distance between the studs are narrower then current construction practices. One piece bus bar construction designed for use only with circuit breakers. Simple dead front adjustment after trim is installed. Positive load side circuit breaker hook rails. Two 15 A single pole and one 30 A double pole breakers included. 14-3/4 in x 12-3/8 in 3-7/8 in. UL listed.
$67.99

Siemens LC3040B1200P Loadcenter, 40-Pole, 200 A, 40-Circuit, NEMA 1 Enclosure, Plug-In Mounting

Single phase, 3-wire, split neutral, 30 spaces/40 circuits. 120/240 V. Indoor with combination surface/flush cover. Includes 6 single pole and two double breakers. 22,000 AIC rating. Aluminum bus bar. One piece steel interior allows for easy removal. Keyhole and nail slots provide easy enclosure mounting. Knockout patterns sized for maximum wiring flexibility. 200 A main breaker load center. UL listed.
$199.99

Siemens LNF222RU Safety Switch, 2-Pole, 60 A, 240 V, Lug Terminal

Single phase, 2-pole, 3-wire, 240 V, 10,000 AIC maximum, rated 10 hp maximum. Compact size, quick-make, quick-break mechanism, galvanized steel enclosure. Bottom cable entry and exit only, no hub provision supplied. Padlocking provisions to lock cover or lock in off position. Lugs suitable for copper or aluminum. Silver plated copper conductors. GSGK60 equipment ground kit sold separately. Number 14-3 AWG line and load wire range. 5-9/16 in x 8-1/4 in x 3-1/8 in. UL listed file No.E4776, NEMA Type GD, meets federal specifications WS865C.
$64.99

Siemens MC1224B1100EFC Meter Load Center Combination, 100 A, 12-Space, 4-Jaw, 24-Circuit, NEMA 3R Enclosure

Combination meter socket. flush mount, 100 A maximum, 100 A main breaker installed. Single phase, 3 wire. 22,000 AIC rating. Aluminum bus bars. NEMA type 3R outdoor enclosure.
$139.99

Siemens Murray E Series E0204ML1060SU Load Center, 60 A, 2-Space, 4-Circuit, Main Lug, NEMA 1 Enclosure, Gray

Single phase, 3-wire, solid neutral, 2 spaces and 4 circuits maximum 1-pole, 1 QP breaker maximum 2-pole, 120/240 VAC. 10,000 AIR. One piece plated aluminum bus bar, heavier main bus for cooler operation, direct cable connection to bus bar. Main lugs and neutral on same plane, same drive tool. 100% circuit breaker twist outs. Positive load side circuit breaker hook rail. When used as service equipment, any unused neutral position may be used for equipment grounding. Simple upper pan adjustment after trim is installed for flush leveling. Rotate entire device 180 deg for bottom feed. Gray enamel finish. UL listed, complies fully with NEC and UL requirements for Class CTL. 5-1/8 in x 9-7/8 in x 2-5/8 in.
$25.99

Siemens Murray E Series E0408ML1125SU Load Center, 125 A, 4-Space, 8-Circuit, Main Lug, NEMA 1 Enclosure, Gray

Code-gauge steel enclosure. Single phase, 3-wire, solid neutral, 4 spaces and 8 circuits maximum 1-pole, 2 QP breakers maximum 2-pole, 120/240 V. 10,000 AIR. One piece plated aluminum bus bar. 100% circuit breaker twist outs. Positive load side circuit breaker hook rail. Suitable for use as service equipment when a main breaker (100 A maximum) is back-fed in a branch position and used with main breaker retainer clip No MBR1. When used as service equipment, any unused neutral position may be used for equipment grounding. Rotate entire device 180 deg for bottom feed. Gray enamel finish. 6-5/8 in x 12-5/8 in x 3-1/2 in. UL listed, complies fully with NEC and UL requirements for Class CTL.
$27.99

Siemens Murray EQ Series W0204ML1060U Load Center, 60 A, 2-Space, 4-Circuit, Main Lug, NEMA 3R Enclosure, Gray

Single phase, 3-wire, solid neutral, 2 spaces and 4 circuits maximum 1-pole, 1 QP breaker maximum 2-pole, 120/240 VAC. 10,000 AIR. With closure plates, HS style hubs sold separately, uses ECHA075 (694.3559) Hub. One piece plated aluminum bus bar. 100% circuit breaker twist outs. Will not accommodate 2-pole GFCI or circuit breaker with shunt trip. Positive load side circuit breaker hook rail. When used as service equipment, any unused neutral position may be used for equipment grounding. Rotate entire device 180 deg for bottom feed. Gray enamel finish. CSA and UL listed, complies fully with NEC and UL requirements for Class CTL. 5 in x 8 in x 4-1/4 in.
$37.99

Siemens Murray EQ Series W0408ML1125U Load Center, 125 A, 4-Space, 8-Circuit, Main Lug, NEMA 3R Enclosure, Gray

Code-gauge steel enclosure. Single phase, 3-wire, solid neutral, 4 space/8 circuits 1-pole, 2 QP breakers 2-pole, 120/240 VAC. 10,000 AIR. With closure plates, HS-hubs sold separately. One piece plated aluminum bus bar. 100% circuit breaker twist outs. Positive load side circuit breaker hook rail. Suitable for use as service equipment when a main breaker (100 A maximum) is back-fed in a branch position and used with main breaker retainer clip No MBR1. When used as service equipment, any unused neutral position may be used for equipment grounding. Rotate entire device 180 deg for bottom feed. Gray enamel finish. CSA and UL listed, complies fully with NEC and UL requirements for Class CTL. 6 in x 12-1/4 in x 4-1/4 in.
$37.99

Siemens Murray LC008DSU Load Center, 125 A, 8-Space, 16-Circuit, Main Lug, NEMA 1 Enclosure, Surface Mounting

Single-phase type 1 with 8 to 1 in spaces, 16 circuits. Use neutral lug kit DLK1 or DLK2 as required. Indoor closure with door.
$37.99

Siemens Murray SS102AX Meter Socket, 1-Phase, 200 A, 300 V, 4-Jaw, Overhead Feed Cable Entry, NEMA 3R Enclosure

Single-phase, 3-wire, 4-jaw, 600 V maximum. Jaws fabricated from high conductivity, tin-plated, copper alloy. Insulating jaw support blocks of high impact, non-tracking thermoset polyester. Galvanized steel enclosure. Safety guides reduce chances of accidental contact and aligns meter in sock. Uses RX style hub (not included). Provision for 5th jaw, no bypass. UL listed.
$74.99

Siemens SUAT317-0G Meter Socket, 1-Phase, 200 A, 600 V, 4-Jaw, Overhead Feed Cable Entry, NEMA 3R Enclosure

Single phase, 3-wire, 4-jaw, 600 V maximum. Jaws fabricated from high conductivity, tin-plated, copper alloy. Insulating jaw support blocks of high impact, non-tracking thermoset polyester. Galvanized steel enclosure. Safety guides reduce chances of accidental contact and aligns meter in sock. Uses RX style hub (not included). Provision for 5th jaw and closure plate included, no bypass. UL listed.
$52.99

Siemens SUAT317-OPQG Meter Socket, 1-Phase, 200 A, 600 V, 4-Jaw, Overhead Feed Cable Entry, NEMA 3R Enclosure

Galvanized steel enclosure. Single phase, 3-wire, four jaw, 600 V maximum. Jaws fabricated from high conductivity, tin-plated, copper alloy. Insulating jaw support blocks of high impact, non-tracking thermoset polyester. Safety guides reduce chances of accidental contact and aligns meter in sock. Uses RX style hub (not included). Includes two ground lugs. Swing switches are stainless steel. Provision for 5th jaw. UL listed.
$54.99

Siemens SUAT417-XG Meter Socket, 1-Phase, 200 A, 600 V, 4-Jaw, Overhead/Underground Feed Cable Entry

Single phase, 3-wire, 4-jaw, 600 V maximum. Jaws fabricated from high conductivity, tin-plated, copper alloy. Insulating jaw support blocks of high impact, non-tracking thermoset polyester. Galvanized steel enclosure. Safety guides reduce chances of accidental contact and aligns meter in sock. Uses RX style hub (not included). Provision for 5th jaw and closure plate included, no bypass. UL listed.
$49.99

Square D HOM2040M200PC Plug-On Neutral Loadcenter, 40-Pole, 200 A, 20-Space, NEMA 1 Enclosure

Built with a plated, aluminum bus bar. Main breaker installed. UL listed.
$97.99

Square D Homeline HOM24L70FCP Load Center, 70 A, 2-Space, 4-Circuit, Main Lug, NEMA 1 Enclosure, Gray

Main lug indoor load center, 70 A, 2 space/4-circuits. NEMA type 1 enclosure with a flush mount cover. Overhead or underground feeds with 1-1/4 in knockouts in both the top and bottom endwalls. Compatible with Homeline 1 pole and tandem breakers and a PK3GTA1 ground bar kit (not included). UL listed.
$15.99

Square D Homeline HOM24L70RBCP Load Center, 70 A, 2-Space, 4-Circuit, Main Lug, NEMA 3R Enclosure, Gray

Main lug outdoor load center, 70 A, 2 space and 4 circuit. NEMA type-3R enclosure with a rainproof cover for outdoor use. Class 1170 unit is intended for use in fixed applications and can accommodate overhead or underground feed. Maximum SCCR of 10,000. ANSI certified and UL listed.
$27.99