Plumbing Tools. Shop Koopman // Order Online • Pickup Instore • Save Time

Apollo 69PTKG1096 Clamp Tool, 3/8 to 1 in Crimping, PEX Crimping Plug

ApolloPEX??? pinch clamp tools are the most economical PEX tool available from Apollo?? and are compatible with most PEX stainless steel pinch clamps.

$69.99

Apollo 69PTKH0014C Crimp Combo Tool, 1/2 to 3/4 in Crimping, Comfort-Grip Handle

Use for PEX tubing and fittings, includes Go-No-Go gauge.

$64.99

CAMCO 09943 Element Wrench

Zinc-plated element wrenches fit all screw-in elements and 1-1/2 in nuts. Works with your screwdriver. Goes into offsets where an adjustable wrench can't.

$7.99

Crescent Wiss WC5SN Hand Crimper, 22 ga Crimping, Cushion-Grip Handle

Crimps for heating, ventilating and air conditioning. Made from quality steel for better edges with a treated industrial finish to help prevent rust. Cushion grip handles. Use for joining sheet metal pipes of the same size (can be corrugated, round or square) or repairs in the field. Matte black finish and red plastisol grips. Compound action. Throat measures 9-1/4 in L x 1-1/4 in D.

$32.99

Crescent Wiss WRPCLG Pipe Cutter, Ratchet Cutting, Lightweight Handle, HCS Blade

$37.99

Crescent Wiss WRPCMD Pipe Cutter, Ratchet Cutting, Lightweight Handle, HCS Blade

$29.99

Delta PST090 Deburring Tool, 8 in L

Deburring tool removes burrs from plastic and copper tubing.

$9.99

Harvey 095005 Sandcloth, 120-Grit, Aluminum Oxide

E-Z clean abrasive sandcloth is a flexible yet strong cotton fabric combined with a tough, hard 120-grit aluminum oxide abrasive to provide faster cleaning. Two layers of a special adhesive and water-resistant resin make a plumber's roll that provides consistently stronger solder joints.

$3.79

Lenox 20980HSF18 Handsaw, 10 TPI, Carbon Steel Blade, 18 in L Blade

Wide, rigid carbon steel blade with precision milled teeth. Cuts through any diameter plastic pipe, wood and nail-embedded wood. Cuts on push and pull strokes. Blade resists flexing, attaches to handle with single screw. Lightweight aluminum handle with large opening hand grip for max finger clearance and enough room for gloves. 10 TPI.

$21.99

Malco C4R Downspout Crimper, Ergonomic Handle

If you are looking for a tool that efficiently downsizes the corners of aluminum or steel downspout, then the Malco 5 blade gutter crimper is the tool you are looking for. The blades produce 1-1/4 in long double crimps without causing deformation of downspout walls. A factory-like crimp ensures that the downspout walls stay square for a tight fitting, leak-proof connection. A handle closing stop helps to maintain a consistent crimp profile. Made with hardened all-steel construction and a nickel chrome finish, you can assure this tool will last a long time. Added power and comfort is also achieved with RedLine Handle technology. The handle opening of the Gutter Crimper compliments the natural power stroke of any user's hand and maximizes the powerful 7:1 mechanical advantage of compound-leverage head to handle linkage. Every handle is made with non-slip grip inserts, comfortable Handle grip contours, spring handle actuation and a thumb-operated handle latch. All of these qualities ensure a natural fit and feel for comfortable one hand operation.

$37.95

Malco C5R Pipe Crimper, Ergonomic Handle

$39.99

Mintcraft PMB-507 Cable Saw

$6.99

Oatey 31327 Fitting Brush, 1-1/2 in L Brush, 5 in OAL, Steel Bristle

Designed for cleaning, deburring and polishing the inside of copper fittings prior to soldering. Can also be used to clean plastic and brass. Brush is made of high carbon steel bristles to ensure a long lasting, durable and sharp cutting surface. Contoured plastic handle provides a comfortable grip. Stem is made of galvanized steel wire.

$3.99

Oatey 31328 Fitting Brush, Non-Slip Contoured Handle, Steel Bristle

Designed for cleaning, deburring and polishing the inside of copper fittings prior to soldering. Can also be used to clean plastic and brass. Brush is made of high carbon steel bristles to ensure a long lasting, durable and sharp cutting surface. Contoured plastic handle provides a comfortable grip. Stem is made of galvanized steel wire.

$3.79

Oatey 31407 4-in-1 Brush, Steel Bristle

Includes four long-lasting high carbon steel brushes for cleaning the ID and OD of 1/2 and 3/4 in copper tube and fittings. Also used for battery terminals and deburring.

$11.99

Oatey 31411 Sandcloth, 120-Grit, Aluminum Oxide

Oatey® Plumber's abrasive sandcloth blends a lightweight but strong cotton-based fabric with a tough aluminum abrasive for cleaning copper pipe, fittings and other soft metals.

$4.59

Plumb Pak PP10-7 Air Valve Key

Pro-quality plumbing tool. For hot water radiators, convectors and baseboards. Carded.

$4.29

Plumb Pak PP806-1 Sillcock Faucet Handle

Sillcock Faucet Handle, Wheel Handle, For: 1/4 in Square Stem

$3.79

Plumb Pak PP806-10 Sillcock Faucet Handle

16 point.

$4.59

Plumb Pak PP806-11 Sillcock Faucet Handle, Removable Handle

12 point.

$3.79

Plumb Pak PP840-3 Tube Cutter

For tubing 1/8 to 1-1/8 in OD.

$16.99

Plumb Pak PP840-30 Furnace Key, Metal

1 per card.

$5.69

Plumb Pak PP840-31 Furnace Key, Square Head, Metal

1 per card.

$6.49

Plumb Pak PP840-4 Faucet Reseater

Includes three hardened steel cutters including 1/2 in, 9/16 in and 5/8 in.

$6.00

Plumb Pak PP840-40 Faucet Reseater

With three hardened steel cutters. 1/2 in, 9/16 in and 5/8 in.

$4.00

Plumb Pak PP840-59 Shower Valve Socket Wrench Set, Carbon Steel

5 sockets, 10 sizes.

$19.99

Plumb Pak PP840-8 Flaring Tool Set, 3/16 to 5/8 in Nominal

For tubing from 3/16 to 5/8 in OD.

$25.99

Plumb Pak PP854-15 Cleaning Brush, 3/8 in L Brush, 8-1/4 in OAL

Soft bristles for applying primer, glue or other solutions. 2/card.

$4.59

Plumb Pak PP874-00PC Shut-Off Key

Key for loose key stops. Tamperproof.

$2.00

Prosource T0013L Tube Cutter

Aluminum body and wheel. Suj2 cutting wheel. For cutting tubes 1/8 to 1-1/8 in. Includes spare cutting wheel.

$25.99

Prosource T002-3L Pipe Cutter, Aluminum Blade

Aluminum body. SK5 cutting blade.

$16.99

Prosource T003-3L Tube Cutter, Steel Blade

Zinc body, steel knob. Suj2 cutting sheet. For cutting tubes 1/8 to 5/8 in OD.

$12.99

Prosource T0533L Swaging Tool

Fits 3/16 in, 1/4 in, 5/16 in, 3/8 in, 1/2 in and 5/8 in OD tubing.

$9.99

Prosource T1543L 4-Way Silcock Key, Steel

Hardened steel. Designed to fit 1/4 in, 9/32 in, 5/16 in and 11/32 in square stem.

$11.99

Prosource T1683L Faucet Handle Puller Kit

Removes large and small faucet handle and compression sleeves. Removes 3/8 in and 1/2 in compression sleeves.

$15.99

Prosource T1703L Tub Drain Remover Tool

Installs and removes tub drains and closet spuds. Fits most tub drains and 1-1/2 to 2 in closet spuds.

$12.99

SharkBite U702A Deburring and Safe Seal Tool

The SharkBite safe seal tool is a pipe deburring and depth setting tool designed for use with chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX) and copper tubing.

$16.99

SUPERIOR TOOL 03845 Sink Drain Wrench, 2 in Jaw Opening

Universal design for installation and repair of kitchen and bath "P" trap DWV nuts, kitchen sink basket strainer nuts and plastic DWV nuts and wing tabs. Rental.

$9.99

Superior Tool 35025 Tube Cutter, Steel Blade

5/8 in OD Mini Tubing Cutter roller-less design. For use in confined areas on copper, aluminum and mild steel. Zinc-plated body. One-piece knob and screw. Heat-treated alloy steel cutting wheel. Replacement cutter wheel #42525.

$8.69

SUPERIOR TOOL 35180 Tube Cutter, Steel Blade

For cutting tubing in close quarters. Hardened alloy steel cutter wheel. Cutting capacity 1/8 to 1-1/8 in OD.

$12.99

Superior Tool 35236 Tube Cutter, Steel Blade

1-1/8 in OD screw-feed tubing cutter. Traditional style heavy-duty mid-range cutter. Cuts and deburrs copper, aluminum and mild steel. Durable epoxy powder-coated finish for corrosion resistance. Heat-treated alloy steel cutting wheel. Replacement cutter wheels #42835 (Cu, Al, Brass) and #42836 (PVC, CPVC, ABS).

$17.99

SUPERIOR TOOL 35275 Tube Cutter, Reamer Blade

Cuts tubing of hard or soft aluminum, brass, copper and thin wall conduit. Tubing rides freely on hardened rollers. Cuts cleanly without burrs or tubing distortion. Flare cut-off rollers permit cutting directly behind a cracked flare without waste. Long-life alloy cutter wheels. Retractable, hardened reamer blade built-in, locks open or closed.

$11.99