1/3 hp 115 V thermoplastic zinc motor housing dissipates heat quickly and stops premature rust to extend motor life. 1-1/2 in NPT discharge with 1-1/4 in reducer. Noryl® impeller, tether float switch, thermal and overload protection, 9 ft grounded electric cable, oil cooled motor for a better performance. 1/3 hp motor, 115 V. Capacity 3000 gph/5 ft 2500 gph/10 ft 2000 gph/15 ft 1450 gph/18 ft. The most economical submersible protection for basement liable to flooding. Recommended for a permanent residential installation.
1/3 hp 115 V heavy-duty cast iron and zinc motor housing dissipates heat quickly and stops premature rust to extend motor life. 1-1/2 in NPT discharge with 1-1/4 in reducer, Noryl® impeller, piggyback tether float switch, easy to adjust. Thermal and overload protection, 9 ft grounded electric cable, 1/3 hp oil cooled motor. Recommended for a permanent residential installation, up to 20 ft of head and for a continuous use. 17.6 lb (8 kg).
4 in submersible pumps are the most economical, energy-efficient pumps for 4 in wells or larger. They provide the optimum amount of water and pressure for general home and farm use.
4 in submersible pumps are the most economical, energy-efficient pumps for 4 in wells or larger. They provide the optimum amount of water and pressure for general home and farm use.
4 in submersible pumps are the most economical, energy-efficient pumps for 4 in wells or larger. They provide the optimum amount of water and pressure for general home and farm use.
Rugged cast iron construction. Superior performance at depths to water of 100 ft or less. 1/2 hp pumps up to7.9 gpm. 3/4 hp pumps up to 11.8 gpm. Heavy-duty dual-voltage motor, 1/2 hp preset at 115V, 3/4 hp preset at 230V. Prewired pressure switch preset for 30/50 psi operation. Self-priming after pump housing is initially filled. Built-in pressure regulator. CSA certified. Jet kit sold separately.
Rugged cast iron construction. Superior performance at depths to water of 100 ft or less. 1/2 hp pumps up to7.9 gpm. 3/4 hp pumps up to 11.8 gpm. Heavy-duty dual voltage motor 1/2 hp preset at 115 V, 3/4 hp preset at 230 V. Prewired pressure switch preset for 30/50 psi operation. Self-priming after pump housing is initially filled. Built-in pressure regulator. CSA certified. Jet kit sold separately.
Corrosion-resistant, self-priming sprinkler pumps are constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic. Capable of operating up to 30-sprinkler heads.
Driven by a high-performing, 6-1/2 hp engine. Lightweight portable unit with rugged carrying handle. Easy portability for water transfer in remote locations.
This rugged cast iron sump pump is designed with a recessed vortex impeller virtually resist clogs and is designed to handle 1/2 in solids. Ideal for light effluent applications such as dishwashers, wet bars, showers and more.
Automatic submersible sewage pump made from rugged cast-iron to maximize pump life. Heavy-duty motor with overload protection provides safe operation. Maximum pumping capacity to 9000 gph. 2 in NPT discharge and 10 ft power cord. Requires 18 in minimum diameter sewage basin. CSA certified.
Flotec's 1/4 hp sump pump with energy efficient design that produces high output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered On/Off float switch.
Flotec's 1/3 hp sump pump with energy efficient design that produces high output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered On/Off float switch.
Flotec's 1/2 hp sump pump with energy efficient design that produces high output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered On/Off float switch.
Rugged stainless steel and zinc construction. Heavy-duty high efficiency motor. Piggy-back style switch for automatic or manual operation, for minimum 10 in sump diameter. Pumps up to 6000 gph. 8 ft grounded power cord. 1-1/2 in NPT discharge. CSA Certified.
Rugged stainless steel and cast iron construction. Heavy-duty high efficiency motor. Piggy-back style switch for automatic or manual operation, for minimum 10 in sump diameter. Pumps up to 6300 gph. 8 ft grounded power cord. 1-1/2 in NPT discharge. CSA Certified.
Corrosion-resistant zinc construction, dissipates heat quickly and extends motor life, uni-body motor housing eliminates leak points, stainless steel fasteners, Quadra-Seal® technology provides excellent motor protection, smooth flow hydraulics delivers excellent performance, vertical float switch operates in a 10 in or larger sump basin, pumps up to 6660 gph maximum lift of 29 ft.
Includes one water pump model WP10, with 12 ft, 1-1/4 in discharge hose. Powered by water, uses no electricity. There are no moving parts and no motors to burn out. Power is regulated by hose bib which pumps to within 1/8 in of surface. Non-corrosive and uses 1-1/4 or 1-1/2 in discharge hose. Pumps approximately 800 gal of water per hour. Safe and easy to use. Boxed.
Pumps 1200 gph at 1 ft. Quiet operation for a better indoor experience. Corrosion and rust-resistant epoxy-coated cast aluminum pump housing. Removes water to within 1/8 in of surface. Bottom intake design with pre-screen to protect against debris.
Pacer's S Series self-priming centrifugal pumps are light-weight and chemically resistant for general service on water, salt water, waste water, mild acids and bases. This is our most popular pump across multiple markets. They feature stainless steel internal fasteners, Viton®, EPDM or Buna O-ring with stainless steel external fasteners. There is a non-metallic option which minimizes solution contact with internal metal parts. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.
4 in submersible deep well pump. Powered by a 2-wire, industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4 in NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion.
4 in submersible deep well pump. Powered by a 2-wire, industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4 in NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion.
4 in submersible deep well pump. Powered by a 3-wire, 230 V industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4 in NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion. 1/2, 3/4 and 1 hp models come with a control box.
Ideal for use in shallow well (less than 25 ft) and deep well (25 to 90 ft) applications. Cast iron pump housing for heavy-duty applications. 115/230 V heavy-duty motor with voltage selector for simple connection to existing power source. Includes factory pre-wired 30/50 pressure switch that produces up to 76 psi with automatic shut-off. Rated at 11 gpm.
Ideal for use in shallow well (less than 25 ft) and deep well (25 to 90 ft) applications. For heavy-duty applications. 115/230 V heavy-duty motor with voltage selector for simple connection to existing power source. Produces up to 71 psi with automatic shut-off. Cast iron pump housing. Includes factor pre-wire 30/50 pressure switch. Rated at 18 gpm.
4 in submersible deep well pump. Powered by a 3-wire, 230 V industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4 in NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion. 1/2, 3/4 and 1 hp models come with a control box.
4 in submersible deep well pump. Powered by a 2-wire, industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4 in NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion.
4 in submersible deep well pump. Powered by a 2-wire, industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4 in NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion.
Manual, submersible pump. Ideal for dewatering applications. Reinforced thermoplastic construction will not rust or corrode. Screened bottom intake design removes water to within 3/16 in of surface. Rated at 1300 gph.
Automatic submersible sump pump. Ideal for use in basins 14 in Dia or greater with light water removal needs. Reinforced thermoplastic pump housing and base are corrosion and rust-resistant. Tethered float switch provides reliable automatic operation. 2900 gph.
Designed for rugged, long-life service, all parts are made from close grain cast iron for optimum strength. All bolt lugs are reinforced for maximum strength. Cap can be adjusted for a wide range of handle positions. Base tapped for 1-1/4 in pipe connection. If handle is left in up position and no foot valve is listed, entire pump will drain-prevents freezing.
Under-sink basin system with 1/3 hp sump pump, pumps up to 3600 gph. Ideal for pumping washing machine, wet bar and air conditioning drainage without an in-ground basin. Heavy-duty 6 gal structural foam drainage tank. Easy installation, eliminates need for expensive plumbing renovation. CSA certified.
4 in submersible pumps are the most economical, energy-efficient pumps for 4 in wells or larger. They provide the optimum amount of water and pressure for general home and farm use.
Built-in shallow well jet has corrosion-resistant nozzle, venturi and check valve. Close-grained cast iron pump body and base. Built-in check valve to prevent accidental loss of prime. Dustproof cover to protect all electrical components from dust and insects. Motor features stainless steel shaft, heavy-duty ball bearings, balanced rotor and insulated motor windings. Pre-set, pre-wired pressure switch for automatic operation when used with water system tank. Top or side discharge-simplifies installation. 1-1/4 in NPT suction and 3/4 in NPT discharge. Dual voltage 115/230 V, factory set at 230 V. Wiring diagrams are permanently affixed on each motor for easy field change to 115 V. Pressure switch setting 30 to 50. CSA certified.
Close-grained cast iron body and base, specially treated for corrosion resistance. Provides strong performance with good pressure for wells to 25 ft deep. Self-priming after the priming chamber has been filled with water. Drain port provided for easy winterizing. Pump primes faster and handles more air with a multi-port, precision-molded, reinforced polypropylene diffuser. Motor windings feature insulation materials that protect against excessive moisture and contaminants. Heavy-duty ball bearings are sealed, permanently lubricated and tested to ensure extended life and smooth quiet operation. Built-in jet features a high strength poly-carbonate nozzle and venturi for maximum resistance to corrosion and abrasion. Clean out plug provided for ease of service. Noryl® impeller is precision molded for ideal balance and is ultra-smooth for highest performance and efficiency. Mechanical shaft seal is precision lapped and made of highly polished carbon-ceramic, stainless steel construction, with an internal design for continuous water lubrication. Balanced rotor is die-cast under high pressures for uniform performance and greater efficiency. Pump and motor shaft are stainless steel for maximum corrosion resistance, with a one-piece threaded shaft for positive drive and alignment. Includes a dustproof cover to protect all electrical components from dirt, dusts and insects. Pressure switch with adjustable cut-in and fixed differential (20 psi). 115/230 V.
The ProJet™ SL convertible jet pumps offer a proven cast iron self-priming design. The ProJet™ SL convertible jets utilize the built-in regulators, offering easier priming and better range of performance from a complete line of shallow well, 4 in double pipe, 2 in and 3 in single pipe jet packages.
Durable thermoplastic resists corrosion. Automatic operation, designed for minimum 14 in sump basins. Pumps up to 3200 gph. Dependable motor and float switch for automatic or manual operation. 1-1/2 in discharge and 8 ft power cord. Self-cleaning screen reduces maintenance. CSA certified.
Durable thermoplastic resists corrosion. Automatic operation, designed for minimum 14 in sump basins. Pumps up to 3600 gph. Powerful motor with automatic thermal overload protection. 1-1/2 in discharge and 8 ft power cord. Self-cleaning screen reduces maintenance. CSA certified.
Durable thermoplastic resists corrosion. Automatic operation, designed for minimum 10 in sump basins. Pumps up to3600 gph. Powerful motor with automatic thermal overload protection. 1-1/2 in discharge and 8 ft power cord. Self-cleaning screen reduces maintenance. CSA certified.