Punches

View as Grid List
Sort by
Display per page

DASCO PRO 22 Pin Punch Kit, 6 -Piece, Steel, Blue

Dasco Pro offers the most frequently used and popular items in kits. Professionals and homeowners alike can grab a kit with confidence that they have the most sought after tool for the job.
$13.99

DASCO PRO 253-0 Roll Pin Punch, 1/8 in Tip, 4 in L, Steel

Made of heat-treated high carbon American steel. Machined specifically for removing spring or roll pins. Made with a hardened point, long shaft.
$6.99

DASCO PRO 530-0 Center Punch, 1/4 in Tip, 4 in L, HCS

Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
$4.79

DASCO PRO 531-0 Center Punch, 5/16 in Tip, 4-1/2 in L, HCS

Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
$4.99

DASCO PRO 532-0 Center Punch, 7/16 in Tip, 5 in L, HCS

Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
$5.99

DASCO PRO 534-0 Center Punch, 1/2 in Tip, 5-1/2 in L, HCS

Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
$6.99

DASCO PRO 539-0 Prick Punch, 1/4 in Tip, 4 in L, HCS

Made of heat-treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
$4.99

DASCO PRO 541-0 Prick Punch, 3/8 in Tip, 5 in L, HCS

Made of heat-treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
$5.69

DASCO PRO 564-0 Solid Punch, 1/8 in Tip, 5 in L, HCS

Made from heat-treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.
$6.99

DASCO PRO 565-0 Solid Punch, 5/32 in Tip, 5-1/2 in L, HCS

Made from heat-treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.
$6.99

DASCO PRO 566-0 Solid Punch, 3/16 in Tip, 7 in L, HCS

Made from heat-treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.
$6.99

DASCO PRO 581-0 Pin Punch, 3/32 in Tip, 5-1/2 in L, HCS

Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
$5.39

DASCO PRO 582-0 Pin Punch, 1/8 in Tip, 5-1/2 in L, HCS

Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
$4.99

DASCO PRO 583-0 Pin Punch, 5/32 in Tip, 5-1/2 in L, HCS

Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
$5.69

DASCO PRO 584-0 Pin Punch, 3/16 in Tip, 5-1/2 in L, HCS

Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
$5.69

DASCO PRO 589-0 Pin Punch, 1/4 in Tip, 6 in L, HCS

Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
$6.49

DASCO PRO 590-0 Pin Punch, 5/16 in Tip, 6 in L, HCS

Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
$6.99

DASCO PRO 592-0 Pin Punch, 1/16 in Tip, 4-1/2 in L, HCS

Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
$4.99

DASCO PRO 606-0 Drift Punch, 1/4 in Tip, 12 in L, HCS

Made of heat-treated, high-carbon American steel. Features a long, tapered point to aid in aligning and sizing holes in metal and various materials. Strong points and "Target head" render long service.
$10.99

GENERAL 1261-0 Utility Grommet Kit, Brass

GENERAL Tools offers solid brass grommet kits, snap fastener kits and screw fastener kits. These various kits are used to repair canvas, tarpaulins, tents, awnings, sailcloth, lawn furniture and pool covers. Each set has handy step-by-step instructions.
$3.79

GENERAL 1261-2 Utility Grommet Refill, Brass

GENERAL Tools offers solid brass grommet kits, snap fastener kits and screw fastener kits. These various kits are used to repair canvas, tarpaulins, tents, awnings, sailcloth, lawn furniture and pool covers. Each set has handy step-by-step instructions.
$3.49

GENERAL 1261-4 Utility Grommet Refill, Brass

GENERAL Tools offers solid brass grommet kits, snap fastener kits and screw fastener kits. These various kits are used to repair canvas, tarpaulins, tents, awnings, sailcloth, lawn furniture and pool covers. Each set has handy step-by-step instructions.
$3.99

GENERAL 70079 Center Punch, 1/2 in Tip, 5 in L, Aluminum

Lightweight aluminum body with alloy steel internal components that provides accurate center punches to prevent drill bits from traveling. One-handed operation. No hammer needed.
$13.99

GENERAL 71260 Utility Grommet Kit, Brass, Black Oxide

GENERAL Tools offers solid brass grommet kits, snap fastener kits and screw fastener kits. These various kits are used to repair canvas, tarpaulins, tents, awnings, sailcloth, lawn furniture and pool covers. Each set has handy step-by-step instructions.
$10.99

GENERAL 71262 Utility Grommet Kit, Brass, Black Oxide

GENERAL Tools offers solid brass grommet kits, snap fastener kits and screw fastener kits. These various kits are used to repair canvas, tarpaulins, tents, awnings, sailcloth, lawn furniture and pool covers. Each set has handy step-by-step instructions.
$11.99

GENERAL 71264 Utility Grommet Kit, Brass, Black Oxide

GENERAL Tools offers solid brass grommet kits, snap fastener kits and screw fastener kits. These various kits are used to repair canvas, tarpaulins, tents, awnings, sailcloth, lawn furniture and pool covers. Each set has handy step-by-step instructions.
$11.99

GENERAL 72 Punch Plier, 8-1/2 in OAL, Steel Body

Spring tensioned, self opening tool made of plated steel with cushioned vinyl grip with revolving turret that has six hardened steel punches: 5/64 in, 3/32 in, 7/64 in, 1/8 in, 5/32 in and 3/16 in; used to make tiny holes in leather, plastic, rubber, canvas and other lightweight materials.
$10.99

GENERAL 73 Punch Plier, 0.81 in OAL, Steel Body

For punching round holes in leather, plastic, rubber, canvas, cardboard and similar materials; special compound joint design requires less effort than other punch pliers; spring tension, self-opening revolving punch; six tapered, hollow, hardened steel, non-clogging punches; plastic grips for comfort and control. Punch sizes: 5/64 in, 3/32 in, 7/64 in, 1/8 in, 5/32 in and 3/16 in.
$16.99

GENERAL 77 Center Punch, 5/8 in Tip, 5 in L, Aluminum

Lightweight aluminum body with alloy steel internal components, provides accurate center punches without drill bit traveling. One-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials.
$19.99

GENERAL 79 Center Punch, 1/2 in Tip, 4-7/8 in L, Steel

Provides accurate center punches to prevent drill bits from traveling, handles heavy-duty metals, yet not overbearing when working with wood or thin-walled tubing. One-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Black oxide finish to prevent rust. Used for punching, marking and staking and hardened steel point is replaceable.
$24.99

GENERAL 81264 Grommet Tool Kit

The Multi-size grommet kit can be used to repair canvas, tarpaulins, tents, awnings, sailcloth, lawn furniture and pool covers.
$12.99

GENERAL 87 Center Punch, 5/16 in Tip, 5-3/4 in L, Aluminum

Provides accurate center punches without drill bit traveling, one-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Replaceable hardened steel point and black oxide finish prevents rust.
$18.99

GENERAL Jiffy 806 Self-center Punch, 3/8 in Tip, 2-1/2 in L, Steel

Hardened steel pin, knurled body provides no-slip grip, auto-centering and countersunk end. Used for creating starter screw holes.
$5.99

GREENLEE TEXTRON 7238SB Knockout Kit

GREENLEE TEXTRON Greenlee Knockout Kit, 1/2 - 2 in, 3 Pieces, Includes: (1) 1/2, 3/4, 1-1/4, 1-1/2 and 2 in Punches, (1) Driver and (1) Draw Studs, Suitable For Use With: Battery-Powered, Hydraulic, Ratchet, or Manual Drivers
$349.99

Malco Redline NHP1R Nail Hole Punch, 8-1/2 in L, Alloy Steel

For punching holes in vinyl and aluminum siding. Punches horizontal slot for adding or elongating nail holes in siding to accommodate irregular stud spacing. Slot measures 5/32 in x 3/4 in. Throat depth of 5/8 in with 8-1/2in L. Ergonomic Redline handles with unique one-hand operation latch.
$42.99

Malco Redline SL8R Snap Lock Punch, 8-1/2 in L, Alloy Steel

The snap lock punch for vinyl siding produces wider, more prominent rectangular tab projections for securing vinyl skirting or siding to finishing trim. The raised tabs grip a greater surface area and guard against dislodging due to relaxation of vinyl from heat or blowout during times of high pressure and wind. Constructed of hardened steel stampings and rugged investment cast alloy steel jaws with rust-resistant nickel plate and black oxide finishes to ensure long service life.
$47.99

Malco SL5 Snap Lock Punch, 9 in L, Alloy Steel

Add snap lock plastic skirting and siding to finishing trim. Makes tabs in the cut edge of siding panel. Used as a finishing course at top of wall or below window. Tabs lock into utility trim. Punch raises a high projection to compensate for natural relaxation of vinyl plastic. It also works well on aluminum siding but is not recommended for steel. Throat depth of 3/8 in and length of 9 in.
$21.99

Malco TNP2S Trim Nail Punch, 6-3/4 in L, Aluminum/Steel

Drive trim nails into soffit, fascia and other finishing trim without denting or marring material. All steel nose and aluminum tail piece directs weight of this punch to the working end when grasping or starting a nail. Accommodates up to 1-1/4 in (31.2 mm) standard trim nails.
$17.99

Malco TNP3S Trim Nail Punch, 5 in L, Steel

Drive trim nails into soffit, fascia and other finishing trim without denting or marring material. All steel nose and aluminum tail piece directs weight of this punch to the working end when grasping or starting a nail. Accommodates up to 1-1/4 in (31.2 mm) standard trim nails.
$18.99

STANLEY 16-226 Pin Punch Set, 6 -Piece, Steel, Powder-Coated, Yellow

Made from one-piece forged chrome vanadium steel that is hardened, quenched and tempered for long life. Powder coat finish for increased visibility. 6 in long. Includes 1/16 in, 1/8 in, 5/32 in, 3/16 in, 1/4 in and 5/16 in points.
$17.99

STANLEY 16-230 Pin Punch, 1/16 in Tip, 6 in L, 1/4 in Dia Shank, Hex Shank, Chrome Vanadium Steel

STANLEY Pin Punch, 1/16 in Tip, Shank Type: Hex, Shank Diameter: 1/4 in, Chrome Vanadium Steel, Powder-Coated, 6 in L
$3.99

STANLEY 58-111 Nail Set, 1/32 in Tip, 4 in L, Steel

Ideal for setting nails into materials. Long length for setting nails in hard-to-reach areas. Fully hardened, precision-milled steel for long life. Long, beveled tip for easy nail head alignment. Square head prevents rolling when set down.
$2.99

STANLEY 58-112 Nail Set, 2/32 in Tip, 4 in L, Steel

Ideal for setting nails into materials. Long length for setting nails in hard-to-reach areas. Fully hardened, precision-milled steel for long life. Long, beveled tip for easy nail head alignment. Square head prevents rolling when set down.
$2.99

STANLEY 58-113 Nail Set, 3/32 in Tip, 4 in L, Steel

Ideal for setting nails into materials. Long length for setting nails in hard-to-reach areas. Fully hardened, precision-milled steel for long life. Long, beveled tip for easy nail head alignment. Square head prevents rolling when set down.
$2.39

STANLEY 58-114 Nail Set, 4/32 in Tip, 4 in L, Steel

Ideal for setting nails into materials. Long length for setting nails in hard-to-reach areas. Fully hardened, precision-milled steel for long life. Long, beveled tip for easy nail head alignment. Square head prevents rolling when set down.
$2.99

STANLEY 58-230 Nail Set, 3 -Piece, Steel, Black Oxide

Made of hardened and tempered alloy steel with square head. Round knurled body. Tips are cupped and chamfered. Square head prevents rolling. 4 in long. Set contains 1/32 in, 1/16 in and 3/32 in nails.
$7.99

STANLEY 58-911 Nail Set, 1/32 in Tip, 5 in L, Steel

Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
$4.59

STANLEY 58-912 Nail Set, 1/16 in Tip, 5 in L, Steel

Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
$4.59

STANLEY 58-913 Nail Set, 3/32 in Tip, 5 in L, Steel

Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
$4.79

Vulcan JL-CSL014 Center Punch, 5/64 in Tip, 4-1/2 in L, Hex Shank, Chrome Alloy Steel

Vulcan Center Punch, 5/64 in Tip, Shank Type: Hex, Chrome Alloy Steel, Baked Enamel, 4-1/2 in L
$3.79
;