Push Fitting Couplings

View as Grid List
Sort by
Display per page
Filter by attributes

EPC 900 Series 10170700 Push Coupling, 1/2 in, 1.53 in L

The CopperLoc?? 900 non-removable push coupling with stop features a lead-free dezincification-resistant copper body, a stainless steel grab ring, a nylon separation ring and an EPDM O-ring. CopperLoc?? products are manufactured utilizing proven ASTM materials and standards.
$3.99

EPC 900 Series 10170705 Push Coupling, 3/4 in, 1.63 in L

The CopperLoc?? 900 non-removable push coupling with stop features a lead-free dezincification-resistant copper body, a stainless steel grab ring, a nylon separation ring and an EPDM O-ring. CopperLoc?? products are manufactured utilizing proven ASTM materials and standards.
$4.59

EPC 901-R Series 10170715 Reducer Coupling, 3/4 x 1/2 in, 1.87 in L

Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC or PEX lines with just one fitting. Push fit, tool free, permanent fitting. Pre-lubed for quick installation, approved for underground installations. Bagged.
$5.69

ProBite 630-003HC/LF811R Push Coupler, 1/2 in

ProBite's lead-free straight couplings are the answer for a fast, leak-free pipe installation. Installable in seconds without requiring glues, solder or flux, our lead-free straight couplings provide solid connections on PEX, CPVC or copper pipe.
$5.99

ProBite 630-004HC/LF821R Push Coupler, 3/4 in

ProBite's lead-free straight couplings are the answer for a fast, leak-free pipe installation. Installable in seconds without requiring glues, solder or flux, our lead-free straight couplings provide solid connections on PEX, CPVC or copper pipe.
$6.99

ProBite 630-043HC/LF841R Reducing Coupler, 3/4 x 1/2 in

ProBite's lead-free reducing coupling connects copper, CPVC and PEX tubing in any combination, for long-lasting full flow connections. Easy to install, easy to remove, reusable, long-lasting and backed by a 75 years warranty.
$7.59

ProBite 630-303HC/LF817R Slip Coupler, 1/2 in

ProBite provides lead-free long-lasting slip couplings that are easy to install, remove and reuse. Connect to copper, PEX and CPVC in any combination. The ideal solutions for pipe fitting repairs. Only one end of the coupling has a stop, allowing the other end to slide freely over the end of a pipe.
$13.99

ProBite 630-304HC/LF827R Slip Coupler, 3/4 in

ProBite provides lead-free long-lasting slip couplings that are easy to install, remove and reuse. Connect to copper, PEX and CPVC in any combination. The ideal solutions for pipe fitting repairs. Only one end of the coupling has a stop, allowing the other end to slide freely over the end of a pipe.
$16.99

SharkBite U004LFA Tube Coupler, 1/4 in, 1-19/32 in L

The SharkBite?? straight coupling is the easiest plumbing fitting to join any combination of Copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe together. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push to connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.
$8.99

SharkBite U006LFA Tube Coupler, 3/8 x 3/8 in, 1-27/32 in L

The SharkBite?? straight coupling is the easiest plumbing fitting to join any combination of Copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe together. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push to connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.
$8.69

SharkBite U008LFA Tube Coupler, 1/2 in, 2 in L

The SharkBite® straight coupling is the easiest plumbing fitting to join any combination of Copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe together. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push to connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.
$7.99

SharkBite U008LFA4 Coupler, 1/2 in

The SharkBite?? connection system is an instant push-fit connection that connects copper tubing, CTS, CPVC and PEX pipe in any combination, no soldering, clamps, unions or glue required. Certified to 200 psi and 200 deg F. Compact, robust DZR brass body. Foundation of a strong, corrosion-resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead-free complaint.
$22.99

SharkBite U009LFA Tube Coupler, 1/2 x 3/8 in, 2 in L

When transitioning pipe size, there is no easier way than with SharkBite?? push-fit reducing couplings. Easily reduce from 1 to 3/4 in or 3/4 to 1/2 in all the way down to 1/4 in sizes. There is no need for solder, glue, clamps or unions, simply push to connect and move on. This quick connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is also rated to 200 deg F and 200 psi.
$8.69

SharkBite U016LFA Tube Coupler, 3/4 in, 2.36 in L

The SharkBite® straight coupling is the easiest plumbing fitting to join any combination of Copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe together. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push to connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.
$9.99

SharkBite U058LFA Tube Coupler, 3/4 x 1/2 in, 2.2 in L

When transitioning pipe size, there is no easier way than with SharkBite® push-fit reducing couplings. Easily reduce from 1 to 3/4 in or 3/4 to 1/2 in all the way down to 1/4 in sizes. There is no need for solder, glue, clamps or unions, simply push to connect and move on. This quick connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is also rated to 200 deg F and 200 psi.
$9.99

SharkBite U3008LFA Slip Coupler, 1/2 in, 4-15/32 in L

The SharkBite?? slip coupling is a plumbing repair fitting that allows you to make quick, easy repairs to copper or CPVC pipe. This fitting allows up to 2 in of damaged pipe to be removed and repaired. When making a repair, simply cut out a section of pipe no greater than 2 in and connect the slip end of the fitting onto one side. Then, take the disconnect clip and slide the slip end of the fitting along the pipe to connect the other pipe. The slip coupling is particularly useful for burst or frozen pipes.
$15.99

SharkBite U3016LFA Slip Coupler, 3/4 in, 4.42 in L

The SharkBite?? slip coupling is a plumbing repair fitting that allows you to make quick, easy repairs to copper or CPVC pipe. This fitting allows up to 2 in of damaged pipe to be removed and repaired. When making a repair, simply cut out a section of pipe no greater than 2 in and connect the slip end of the fitting onto one side. Then, take the disconnect clip and slide the slip end of the fitting along the pipe to connect the other pipe. The slip coupling is particularly useful for burst or frozen pipes.
$18.99

SharkBite U3020LFA Slip Coupler, 1 in, 4-1/2 in L

The SharkBite?? slip coupling is a plumbing repair fitting that allows you to make quick, easy repairs to copper or CPVC pipe. This fitting allows up to 2 in of damaged pipe to be removed and repaired. When making a repair, simply cut out a section of pipe no greater than 2 in and connect the slip end of the fitting onto one side. Then, take the disconnect clip and slide the slip end of the fitting along the pipe to connect the other pipe. The slip coupling is particularly useful for burst or frozen pipes.
$25.99

SharkBite U4008LFA Transition Coupler, 1/2 in, 2 in L

SharkBite?? polybutylene conversion coupling is the easiest way to transition your polybutylene water line to a different-type of pipe. This fitting has color coordinated collars on each end to help you easily identify which side goes with which pipe. The gray colored collar is intended for use on Polybutylene pipe while the tan colored collar is intended for copper, PEX, CPVC or PE-RT. There is no soldering, clamps, unions or glue required when using SharkBite?? push-fit fittings. This fitting is not intended to be connected to Polybutylene pipe on both sides of the fitting.
$9.99

SharkBite U4016LFA Transition Coupler, 3/4 in, 2.35 in L

SharkBite?? polybutylene conversion coupling is the easiest way to transition your polybutylene water line to a different-type of pipe. This fitting has color coordinated collars on each end to help you easily identify which side goes with which pipe. The gray colored collar is intended for use on Polybutylene pipe while the tan colored collar is intended for copper, PEX, CPVC or PE-RT. There is no soldering, clamps, unions or glue required when using SharkBite?? push-fit fittings. This fitting is not intended to be connected to Polybutylene pipe on both sides of the fitting.
$13.99

SharkBite UIP3008A Slip Coupler, 1/2 in, 4.33 in L

The SharkBite?? PVC x PVC slip coupling is a repair coupling that allows you to make a quick and easy repair on PVC pipe (SCH 40, 80 and 120.) The slip coupling allows up to 2 in of damaged pipe to be removed and repaired. Insert the slip coupling onto the PVC pipe and use the PVC depth gauge and disconnect clip to slip the fitting back onto the other end of the pipe, completing the connection.
$19.99

SharkBite UIP3016A Slip Coupler, 3/4 in, 4-1/2 in L

The SharkBite?? PVC x PVC slip coupling is a repair coupling that allows you to make a quick and easy repair on PVC pipe (SCH 40, 80 and 120.) The slip coupling allows up to 2 in of damaged pipe to be removed and repaired. Insert the slip coupling onto the PVC pipe and use the PVC depth gauge and disconnect clip to slip the fitting back onto the other end of the pipe, completing the connection.
$24.99

SharkBite UIP3020A Slip Coupler, 1 in, 4.45 in L

The SharkBite?? PVC x PVC slip coupling is a repair coupling that allows you to make a quick and easy repair on PVC pipe (SCH 40, 80 and 120.) The slip coupling allows up to 2 in of damaged pipe to be removed and repaired. Insert the slip coupling onto the PVC pipe and use the PVC depth gauge and disconnect clip to slip the fitting back onto the other end of the pipe, completing the connection.
$37.99

SharkBite UIP4008A Transition Coupler, 1/2 in, 2.13 in L

SharkBite?? PVC transition couplings connect PVC pipe (SCH 40, 80 and 120) to Copper, PEX, CPVC and PE-RT tubing with no solder, clamps, unions or glue required. The white colored collar is intended for use on PVC pipe while the tan colored collar is intended for Copper, PEX, CPVC or PE-RT. This fitting is not intended to be connected to PVC pipe on both sides of the fitting.
$10.99

SharkBite UIP4016A Transition Coupler, 3/4 in, 2-13/32 in L

SharkBite?? PVC transition couplings connect PVC pipe (SCH 40, 80 and 120) to Copper, PEX, CPVC and PE-RT tubing with no solder, clamps, unions or glue required. The white colored collar is intended for use on PVC pipe while the tan colored collar is intended for Copper, PEX, CPVC or PE-RT. This fitting is not intended to be connected to PVC pipe on both sides of the fitting.
$12.99

SharkBite UIP4020A Transition Coupler, 1 in, 2-11/16 in L

SharkBite?? PVC transition couplings connect PVC pipe (SCH 40, 80 and 120) to Copper, PEX, CPVC and PE-RT tubing with no solder, clamps, unions or glue required. The white colored collar is intended for use on PVC pipe while the tan colored collar is intended for Copper, PEX, CPVC or PE-RT. This fitting is not intended to be connected to PVC pipe on both sides of the fitting.
$21.99

Watts 3515-08/P-400 Tube Coupler, 3/8 in

Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.
$5.39

Watts 3515R-1008/P-602 Tube Coupler, 1/2 x 3/8 in

Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.
$5.39

Watts P-1000 Quick-Connect Tube Union, 1 in, CTS, Plastic

Watts Tube Union, Quick-Connect, 1 in Nominal Size, CTS, Plastic, ASTM F877, FDA Approved, ANSI/NSF-61, NSF-14, CSA B1375, NSF-UP and IAPMO ASSE 1061-2006
$11.99

Watts P-800 Push-Fit Tube Union, 3/4 in, CTS, 250 psi at 75 deg F, Plastic

Watts Tube Union, Push-Fit, 3/4 in Nominal, CTS End, 250 psi at 75 deg F Working, Plastic, ASTM Certified, ANSI, CSA Certified, IAPMO Certified, NSF Approved, For Use in Hot and Cold Water Application
$7.99