You have no items in your shopping cart.
Shop By Category

Filter by:

Clear All
Availability Clear
Brand Clear
Color Clear
Finish Clear
Length Clear
Shop By Category

Roof Flashing

View as Grid List
Sort by
Display per page
Picture of Amerimax 37028 Ledger Flashing Cap, 8 ft L, Z Bar Flashing Profile, Plastic, Gray

Amerimax 37028 Ledger Flashing Cap, 8 ft L, Z Bar Flashing Profile, Plastic, Gray

Fits over ledger board and behind siding to protect from water damage. Recommended for use with pressure-treated lumber.
$4.99
Picture of Amerimax 5421700120 Roof Edge, 10 ft L, Aluminum

Amerimax 5421700120 Roof Edge, 10 ft L, Aluminum

Adds support to shingle when they are extended over roof's edge. The face, with its kickout at the bottom, diverts rain water from the fascia board helping to eliminate rot. Standard gauge. 5/8 in overhang, throw out included in face size. 6 in x 10 ft to 1 in FACE.
$14.99
Picture of Amerimax 5601400120 Roof Edge, 10 ft L, Steel

Amerimax 5601400120 Roof Edge, 10 ft L, Steel

Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the fascia board helping to eliminate rot. Standard gauge. 5/8 in overhang, throw out included in face size. 2-1/3 in x 10 ft to 1-1/2 in Face.
$6.99
Picture of Amerimax 5601900120 Roof Edge, 10 ft L, Steel

Amerimax 5601900120 Roof Edge, 10 ft L, Steel

Overhang gives maximum protection from the roof run-off. Directs run-off into gutters. Used along gutter line of roof edge. Protects and covers roof edge. Acts as a starter strip for a true to align shingles. For new construction and re-roofs. 6 in x 10 ft to 1 in Face.
$11.99
Picture of Amerimax 5701419120 Roof Edge, 10 ft L, Steel, Brown

Amerimax 5701419120 Roof Edge, 10 ft L, Steel, Brown

Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the fascia board helping to eliminate rot. Standard gauge. 5/8 in overhang, throw out included in face size. 2-1/3 in x 10 ft to 1-1/2 in Face.
$6.99
Picture of Amerimax 5761600120 West Coast Drip Edge, 10 ft L, Steel, White

Amerimax 5761600120 West Coast Drip Edge, 10 ft L, Steel, White

Overhang gives maximum protection from the roof run-off. Directs run-off into gutters. Used along gutter line of roof edge. Protects and covers roof edge. Acts as a starter strip for a true edge to align shingles. For new construction and re-roofs. 28 ga steel with 0.018 in thickness.
$7.99
Picture of Amerimax 5761619120 West Coast Drip Edge, 10 ft L, Steel, Brown

Amerimax 5761619120 West Coast Drip Edge, 10 ft L, Steel, Brown

Overhang gives maximum protection from the roof run-off. Directs run-off into gutters. Used along gutter line of roof edge. Protects and covers roof edge. Acts as a starter strip for a true edge to align shingles. For new construction and re-roofs. 28 ga steel with 0.018 in thickness.
$7.99
Picture of Amerimax 66324 Roll Valley Flashing, 10 ft OAL, 24 in OAW, Aluminum

Amerimax 66324 Roll Valley Flashing, 10 ft OAL, 24 in OAW, Aluminum

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$17.99
Picture of Amerimax 67320 Copper Flashing Roll, 10 ft OAL, 20 in OAW, Copper

Amerimax 67320 Copper Flashing Roll, 10 ft OAL, 20 in OAW, Copper

Recommended for use with pressure treated lumber. Used to seal out elements and adds beauty to a home.
$219.99
Picture of Amerimax 67520 Copper Flashing Roll, 20 ft OAL, 25 in OAW, Copper

Amerimax 67520 Copper Flashing Roll, 20 ft OAL, 25 in OAW, Copper

Recommended for use with pressure treated lumber. Used to seal out elements and adds beauty to a home.
$439.99
Picture of Amerimax 68012 Roll Valley Flashing, 50 ft OAL, 12 in OAW, Steel

Amerimax 68012 Roll Valley Flashing, 50 ft OAL, 12 in OAW, Steel

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$39.99
Picture of Amerimax 68110 Roll Valley Flashing, 50 ft OAL, 10 in OAW, Aluminum

Amerimax 68110 Roll Valley Flashing, 50 ft OAL, 10 in OAW, Aluminum

Use on homes and buildings to keep out elements and to protect wood against water damage. Flashings are used at the valley of the roof with composite shingles.
$52.99
Picture of Amerimax 68116 Roll Valley Flashing, 50 ft OAL, 16 in OAW, Aluminum

Amerimax 68116 Roll Valley Flashing, 50 ft OAL, 16 in OAW, Aluminum

Use on homes and buildings to keep out elements and to protect wood against water damage. Flashings are used at the valley of the roof with composite shingles.
$87.99
Picture of Amerimax 68310 Roll Valley Flashing, 10 ft OAL, 10 in OAW, Aluminum

Amerimax 68310 Roll Valley Flashing, 10 ft OAL, 10 in OAW, Aluminum

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$11.99
Picture of Amerimax 70008 Roll Valley Flashing, 50 ft OAL, 8 in OAW, Steel

Amerimax 70008 Roll Valley Flashing, 50 ft OAL, 8 in OAW, Steel

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$29.99
Picture of Amerimax 70012 Roll Valley Flashing, 50 ft OAL, 12 in OAW, Galvanized Steel

Amerimax 70012 Roll Valley Flashing, 50 ft OAL, 12 in OAW, Galvanized Steel

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$42.99
Picture of Amerimax 70016 Roll Valley Flashing, 50 ft OAL, 16 in OAW, Steel

Amerimax 70016 Roll Valley Flashing, 50 ft OAL, 16 in OAW, Steel

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$57.99
Picture of Amerimax 70020 Roll Valley Flashing, 50 ft OAL, 20 in OAW, Galvanized Steel

Amerimax 70020 Roll Valley Flashing, 50 ft OAL, 20 in OAW, Galvanized Steel

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$64.99
Picture of Amerimax 70036 Roll Valley Flashing, 50 ft OAL, 36 in OAW, Steel

Amerimax 70036 Roll Valley Flashing, 50 ft OAL, 36 in OAW, Steel

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$119.99
Picture of Amerimax 70408 Roll Valley Flashing, 10 ft OAL, 8 in OAW, Steel

Amerimax 70408 Roll Valley Flashing, 10 ft OAL, 8 in OAW, Steel

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$9.99
Picture of Amerimax 70410 Roll Valley Flashing, 10 ft OAL, 10 in OAW, Aluminum

Amerimax 70410 Roll Valley Flashing, 10 ft OAL, 10 in OAW, Aluminum

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$10.99
Picture of Amerimax 70414 Roll Valley Flashing, 10 ft OAL, 14 in OAW, Aluminum

Amerimax 70414 Roll Valley Flashing, 10 ft OAL, 14 in OAW, Aluminum

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$16.99
Picture of Amerimax 70420 Roll Valley Flashing, 10 ft OAL, 20 in OAW, Aluminum

Amerimax 70420 Roll Valley Flashing, 10 ft OAL, 20 in OAW, Aluminum

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$22.99
Picture of Amerimax 70424 Roll Valley Flashing, 10 ft OAL, 24 in OAW, Aluminum

Amerimax 70424 Roll Valley Flashing, 10 ft OAL, 24 in OAW, Aluminum

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$25.99
Picture of Amerimax 85067 Copper Flashing Roll, 20 ft OAL, 10 in OAW, Copper

Amerimax 85067 Copper Flashing Roll, 20 ft OAL, 10 in OAW, Copper

Conforms to any surface. ACQ compatible for all pressure-treated lumber. Effective termite barrier. 3 oz copper asphalt laminated to a sheet of creped Kraft paper reinforced with fiberglass scrim to meet government requirements, installed copper side up. Will not corrode or degrade like aluminum flashing. Used with copper or stainless steel nails.
$69.99
Picture of Amerimax 850678 Copper Flashing Roll, 20 ft OAL, 8 in OAW, Copper

Amerimax 850678 Copper Flashing Roll, 20 ft OAL, 8 in OAW, Copper

Conforms to any surface. ACQ compatible for all pressure-treated lumber. Effective termite barrier. 3 oz copper asphalt laminated to a sheet of creped Kraft paper reinforced with fiberglass scrim to meet government requirements, installed copper side up. Will not corrode or degrade like aluminum flashing. Used with copper or stainless steel nails.
$55.99
Picture of Amerimax F50WA6 Roof Edge, 10 ft L, Aluminum, White

Amerimax F50WA6 Roof Edge, 10 ft L, Aluminum, White

Directs run-off into gutters. Used along gutter line of roof edge. Overhang gives maximum protection from roof run-off. Protects and covers roof edge. For new construction and reroofs. Acts as a starter strip for a true edge to align shingles. 2-7/8 in x 10 ft to 11/16 in Face.
$8.99
Picture of AmeriVent 3EF Roof Vent Flashing, 14-3/4 in OAL, 12-1/2 in OAW, Steel

AmeriVent 3EF Roof Vent Flashing, 14-3/4 in OAL, 12-1/2 in OAW, Steel

The standard flashing fits flat to 5/12 pitch roof and is made of double-seamed construction for protection from leakage. For a standard flashing with a 6 in skirt, the model number reads the size and EFFU or RFFU.
$8.99
Picture of AmeriVent 4EF Roof Vent Flashing, 16-3/8 in OAL, 13-3/4 in OAW, Galvanized Steel

AmeriVent 4EF Roof Vent Flashing, 16-3/8 in OAL, 13-3/4 in OAW, Galvanized Steel

The standard flashing fits flat to 5/12 pitch roof and is made of double-seamed construction for protection from leakage. For a standard flashing with a 6 in skirt, the model number reads the size and EFFU or RFFU.
$9.99
Picture of AmeriVent 5EF Roof Vent Flashing, 17-15/16 in OAL, 15 in OAW, Steel

AmeriVent 5EF Roof Vent Flashing, 17-15/16 in OAL, 15 in OAW, Steel

The standard flashing fits flat to 5/12 pitch roof and is made of double-seamed construction for protection from leakage. For a standard flashing with a 6 in skirt, the model number reads the size and EFFU or RFFU.
$9.99
Picture of AmeriVent 6EF Roof Vent Flashing, 18-3/4 in OAL, 16-1/8 in OAW, Steel

AmeriVent 6EF Roof Vent Flashing, 18-3/4 in OAL, 16-1/8 in OAW, Steel

The standard flashing fits flat to 5/12 pitch roof and is made of double-seamed construction for protection from leakage. For a standard flashing with a 6 in skirt, the model number reads the size and EFFU or RFFU.
$24.99
Picture of AmeriVent 6FFU Roof Vent Flashing, Galvanized Steel

AmeriVent 6FFU Roof Vent Flashing, Galvanized Steel

Standard flashings fit various pitch roofs. Its double seamed construction protects from water leakage.
$42.99
Picture of BILLY PENN 00052 Eave Drip, 10 ft L

BILLY PENN 00052 Eave Drip, 10 ft L

Adds support to shingles when they extend over the roof's edge. The face, with its kickout at the bottom, diverts rain water from the fascia board helping to eliminate rot. 26 ga. 10 ft Length.
$5.39
Picture of BILLY PENN 00144 Eave Drip, 10 ft L, Aluminum

BILLY PENN 00144 Eave Drip, 10 ft L, Aluminum

Adds support to shingle when they are extended over roof's edge. The face, with its kickout at the bottom, diverts rain water from the fascia board helping to eliminate rot. Standard gauge. 5/8 in overhang, throw out included in face size. 2-7/16 in x 10 ft - 1 in Face.
$4.99
Picture of BILLY PENN 06738 Handy Roll, 10 ft L, 20 in W, Aluminum

BILLY PENN 06738 Handy Roll, 10 ft L, 20 in W, Aluminum

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$12.99
Picture of BILLY PENN 6542S Roll Valley Flashing, 50 ft OAL, 4 in OAW, Aluminum

BILLY PENN 6542S Roll Valley Flashing, 50 ft OAL, 4 in OAW, Aluminum

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$9.99
Picture of BILLY PENN 6544S Roll Valley Flashing, 50 ft OAL, 6 in OAW, Aluminum

BILLY PENN 6544S Roll Valley Flashing, 50 ft OAL, 6 in OAW, Aluminum

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$14.99
Picture of BILLY PENN 6546S Roll Valley Flashing, 50 ft OAL, 8 in OAW, Aluminum

BILLY PENN 6546S Roll Valley Flashing, 50 ft OAL, 8 in OAW, Aluminum

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$24.99
Picture of BILLY PENN 6548S Roll Valley Flashing, 50 ft OAL, 10 in OAW, Aluminum

BILLY PENN 6548S Roll Valley Flashing, 50 ft OAL, 10 in OAW, Aluminum

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$29.99
Picture of BILLY PENN 6550S Roll Valley Flashing, 50 ft OAL, 12 in OAW, Aluminum

BILLY PENN 6550S Roll Valley Flashing, 50 ft OAL, 12 in OAW, Aluminum

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$34.99
Picture of BILLY PENN 6552S Roll Valley Flashing, 50 ft OAL, 14 in OAW, Aluminum

BILLY PENN 6552S Roll Valley Flashing, 50 ft OAL, 14 in OAW, Aluminum

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$39.99
Picture of BILLY PENN 6558S Roll Valley Flashing, 50 ft OAL, 20 in OAW, Aluminum

BILLY PENN 6558S Roll Valley Flashing, 50 ft OAL, 20 in OAW, Aluminum

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$57.99
Picture of BILLY PENN 6559S Roll Valley Flashing, 50 ft OAL, 24 in OAW, Aluminum

BILLY PENN 6559S Roll Valley Flashing, 50 ft OAL, 24 in OAW, Aluminum

Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
$64.99
Picture of BILLY PENN 6724-100 Step Flashing, 5 in L, 7 in W, 0.011 Gauge, Aluminum, Brown

BILLY PENN 6724-100 Step Flashing, 5 in L, 7 in W, 0.011 Gauge, Aluminum, Brown

Used to flash the wall to the roof in an end wall application. The smaller pieces can be very helpful when trying to flash a chimney.
$34.99
Picture of BILLY PENN 6790 Step Flashing, 5 in L, 5 in W, 0.01 Gauge, Aluminum

BILLY PENN 6790 Step Flashing, 5 in L, 5 in W, 0.01 Gauge, Aluminum

Used to flash the wall to the roof in an end wall application. The smaller pieces can be very helpful when trying to flash a chimney.
$42.99
Picture of BILLY PENN 6791-500 Step Flashing, 3 in L, 4 in W, 28 Gauge, Aluminum, Black

BILLY PENN 6791-500 Step Flashing, 3 in L, 4 in W, 28 Gauge, Aluminum, Black

Used to flash the wall to the roof in an end wall application. The smaller pieces can be very helpful when trying to flash a chimney.
$219.99
Picture of BILLY PENN 6840 Handy Roll, 25 ft L, 14 in W, 0.0086 Gauge, Aluminum

BILLY PENN 6840 Handy Roll, 25 ft L, 14 in W, 0.0086 Gauge, Aluminum

Used as a moisture barrier when opposing slopes of a roof come together to form a valley. Paper weight is 5 lb per roll and the gauge is 0.012.
$19.99
Picture of Duraflo 551103BL Roof Flashing, 16.2 in OAL, 16.2 in OAW, Plastic

Duraflo 551103BL Roof Flashing, 16.2 in OAL, 16.2 in OAW, Plastic

Installed over a 3 in plumbing vent stack to seal the roof penetration. Press fit application, no sealant needed. The flashing will be secured to the roof and shingled around as part of the roofing application. Rigid plastic base.
$10.99
Picture of Duraflo 551143BL Roof Flashing, 18.08 in OAL, 16.3 in OAW, Steel

Duraflo 551143BL Roof Flashing, 18.08 in OAL, 16.3 in OAW, Steel

Installed over a 3 in plumbing vent stack to seal the roof penetration. Press fit application, no sealant needed. The flashing will be secured to the roof and shingled around as part of the roofing application. Rigid plastic base.
$15.99
Picture of FMI V12F-8DM Roof Flashing, Steel

FMI V12F-8DM Roof Flashing, Steel

For 12 in standard and high-temperature pipe.
$129.99
Information
Customer Service
Copyright © 2021 Koopman. All rights reserved.
Powered by nopCommerce