Scaffolding & Platforms

View as Grid List
Sort by
Display per page

METALTECH I-BM4S Scaffold, 750 lb

Use it as a cart to haul your equipment and heavy loads to and from job sites. Folds flat for compact storage and transport. Safety rail to hold on to for stability. Fold away tool shelf for paint can, bucket, screws, nails and tools. Assembled size 50-1/2 x 23-3/4 x 61-1/2 in. Weighs 69 lb. 9 ft reach. Powder-coated. 2 anti-slip 14 ga steel platform. 5 in double locking heavy-duty. Meets ANSI, OSHA and CSA standards.
$269.99

METALTECH I-BMSGR Guardrail Scaffold, Enamel, For: I-BMSS, I-CISC, I-CISCTP, I-CAISC Scaffolding Kit

Assembled dimension of 69-1/2 in x 30 in x 41-1/2 in. Weighs 60 lb. 1 in 16 ga structure. Includes two guardrails with gates and four toggle pins. Compatible with I-BMSS, I-CISC, I-CISCTP AND I-CAISC. Meets ANSI, OSHA and CSA standards.
$239.99

METALTECH I-BMSO4 Outrigger Set, Plastic/Steel, Red Enamel

Assembled dimension of 21-1/2 in x 4 in x 26-1/2 in, weighs 52 lb. 6 in double locking heavy-duty casters. Includes four outriggers, four casters and 12 locking pins. Compatible with I-BMSS. Meets ANSI, CSA and OSHA standards.
$249.99

METALTECH I-CISTR Baker Tool Shelf, Black

For use with I-CISC, I-CISCTP, I-CISCPY, I-CAISC and I-IRC scaffolds. Black polypropylene. 30-1/4 x 20 x 2-3/4 in.
$35.99

METALTECH I-ISEX4PPNCAS Extension

Compatible with I-CISC, I-CISCTP and I-BMSS scaffolds. Assembled dimensions 73-3/4 x 29 x 42-1/2 in. Meets ANSI, CSA and OSHA standard. Weighs 60.2lb. Includes 2 side frames, 2 braces, 8 locking pins.
$249.99

METALTECH I-ISL Safety Brake, Powder-Coated

The ScaffLock™ is an easy to activate braking system for safe use while standing at working height on a baker style scaffold. The easy install system makes it simple and quick to install. The adjustable spring loaded locking system helps adapt to any floor surfaces and caster sizes. Large rubber feet provide stability on any floor surface.
$249.99

METALTECH Jobsite I-CISC Scaffold Tower, 2 in H Adjustment, 1000 lb

Has a 12 ft reach and is stackable up to three units high in order to reach a range of 24 ft. Suitable and safe for all types of interior work. Each end can adjust separately to be used on both level surfaces and stairways. At 29-3/4 in wide, it can roll through doorways. Assembled size 74-3/4 x 29-3/4 x 75 in. Weighs 127 lb. From 27 to 73 in working Heights. 2 in increment adjustable heights. Powder-coated. 1/2 in plywood thick with protective steel edge banding platform. 5 in double locking heavy-duty. Meets ANSI, OSHA and CSA standards.
$299.99

METALTECH Jobsite I-CISCPYGR Guardrail System, For: I-CISCPY, NU-Wave, Perry Model 660 Granite Scaffolding

Assembled dimension of 70 in x 33-1/2 in x 48-1/2 in. Weighs 89 lb. Includes two guardrails with gates. Compatible with I-CISCPY and NU-WAVE/PERRY model 660. Meets ANSI, OSHA and CSA standards.
$269.99

METALTECH Jobsite I-CISGRJP Guardrail System, Steel, Powder-Coated

Assembled dimension of 69-3/4 in x 29-1/4 in x 44-1/2 in. Weighs 59 lb. 1 in 16 ga structure. Includes two guardrails with gates and four toggle pins. Compatible with I-BMSS, I-CISC, I-CISCTP AND I-CAISC. Meets ANSI, OSHA and CSA standards.
$149.99

METALTECH Jobsite I-CISO4 Outrigger Set, Steel, Powder-Coated

Assembled dimension of 19-1/4 in x 4-1/2 in x 24 in, weighs 33 lb. 5 in double locking heavy-duty casters. Includes four outriggers, four casters and 12 locking pins. Compatible with I-CISC, I-CISCTP and I-CAISC. Meets ANSI, CSA and OSHA standards.
$129.99

METALTECH Jobsite I-CISO4TT Outrigger Set, Plastic/Steel, Yellow Enamel

Assembled dimension of 52-3/4 x 3-3/4 x 52-1/4 in, weighs 110 lb, 5 in double locking heavy-duty casters. Includes four outriggers, four casters and 12 locking pins. Compatible with I-CISC, I-CISCTP, I-CAISC and I-CISCPY. Meets ANSI, CSA and OSHA standards.
$329.99

METALTECH Jobsite I-EX4PPNCASPY Scaffold High Extension, Powder-Coated

Compatible with -CISCPY and NU-WAVE/PERRY MODEL 660 scaffolds. Assembled dimension of 73-3/4 x 30-1/2 x 43-1/2 in. Meets ANSI and OSHA standard. Weighs 63 lb. Powder-coated finish. Includes two side frames, two braces and eight locking pins.
$269.99

METALTECH Jobsite I-IMCNT Scaffold Tower, 500 lb

Includes safety rail to hold on to, for stability and Convenient fold away tool shelf for paint can, bucket, screws, nails and tools. Use it as a cart to haul your equipment and heavy loads to and from job sites. Use as a workbench. Multi-level working area. Adjust platforms up to the desired level for a comfortable workplace. Assembled size 49-1/2 x 22-1/2 x 57-3/4 in. Weighs 59 lb 9 ft reach. Powder-coated. Two anti-slip platform. 4 in double locking heavy-duty. Meets ANSI, OSHA and CSA standards.
$179.99

METALTECH M-MBSJP24H Leveling Jack, Steel, Galvanized

With hollow plate. Meets ANSI, CSA and OSHA.
$27.99

METALTECH M-MC4884 Scaffold Cross Brace, Standard, Steel, Galvanized

Designed for scaffold frames that have 4 ft. locking pin spacing. Cross brace must be installed on each leg of a frame or arch frame to reach its full load capacity. Works with both standard and arched scaffold frames for versatile use. Durable construction with 1 in OD galvanized steel tube, 16 ga Weather Resistant. ANSI Specified. CSA Certified. OSHA Approved.
$37.99

METALTECH M-MF6060PS-A Scaffold Frame, Standard, Steel, Blue, Powder-Coated

Powder coated. Flip locking system. Includes coupling pins and spring-locks. Gravity-lock frame lock. 48in lock spacing. Interior tubes: outside diameter 1 in. 16 ga Perimeter tubes: outside diameter 1-5/8 in. 13 ga Meets ANSI and OSHA Standards.
$67.99

METALTECH M-MGPUSL Guard Rail Post, Steel, Powder-Coated

Meets ANSI, CSA and OSHA standards.
$27.99

METALTECH M-MGR5 Guard Rail, Galvanized

Meets ANSI, CSA and OSHA standards.
$15.99

METALTECH M-MGR7 Guard Rail, Galvanized

Meets ANSI, CSA and OSHA standards.
$17.99

METALTECH M-MLA13 Lock Arm, Powder-Coated

Use to lock when stacking frames. Use with standard or arched scaffold frames. Distance between the bolt holes are 13 in. Blue powder-coat for corrosion protection. Meets ANSI, CSA and OSHA standards. Weather resistant.
$5.99

METALTECH M-MLG Pigtail, Steel, Galvanized

For exterior scaffolding. Meets ANSI, CSA and OSHA standards. 1-1/2 in x 3 in.
$3.79

METALTECH M-MLS Spring Lock, Steel, Galvanized, For: Hole of Diameter 1/2 in

Made of corrosion-resistant stainless steel. Can be used for both standard mason and walk-through (arch) scaffold frames. Used to hold METALTECH coupling pin on scaffolding frame. Meets ANSI, CSA and OSHA standards. For a hole 1/2 in.
$2.99

METALTECH M-MO32 Scaffold Outrigger, Steel, Blue, Powder-Coated

Use to provide additional stability for higher elevations. High performance steel and heavy duty welds for a solid and secure footing. Use with any standard or arched scaffold frames. Blue anti-slip baked on powder-coated textured finish for maximum corrosion resistance. Meets OSHA requirements.
$72.99

METALTECH M-MPP719 Scaffold Platform Deck, Aluminum/Plywood, Galvanized

Includes sliding locks for securing. 5/8 in plywood. Meets ANSI, CSA and OSHA standards.
$139.99

METALTECH M-MS20 Bracket Side, Powder-Coated

Meets ANSI, CSA and OSHA standards.
$45.99

METALTECH M-MS30 Bracket Side, Powder-Coated

Meets ANSI, CSA and OSHA standards.
$59.99

ProSource YH-CS001 Caster, Heavy-Duty, For: 8795478 Model Scaffold

For Sku# 879.5478 scaffold. 5 in Dia. x 1-1/4 in W. Rubber wheel. Pin not included. 303 lb load capacity.
$18.99

ProSource YH-SD401/YTL40102 Scaffold, Mini, Steel, Powder-Coated

Steel construction with rust resistant powder-coated finish. 250 lb step capacity with slip resistant surface. 4 in locking casters. Includes two attachable tool bags. 18 in W x 21-1/2 in D x 58-1/25 in H.
$139.99 $49.00

ProSource YH-SD601 Portable Scaffold, 27-15/16 to 71-1/4 in H Adjustment, 1000 lb

Includes four 5 in swivel caster with brakes and a 28-3/32 in W x 66-1/2 in L x 15/32 in T plywood board. Yellow powder coating finish. Dimension of 75 in H x 73-3/4 in W x 29-1/4 in D. Adjustable height of 27-15/16 to 71-1/4 in. Heavy-duty square tube of size 1-1/2 in x 1-1/2 in x 1/16 in.
$269.99

ProSource YH-TR001-2 Scaffold Outrigger, Steel, Yellow, Powder-Coated, For: 8795478 Model Scaffold

Yellow powder-coated finish. Steel material. Casters not included. Dimension of 18 in H x 15-5/8 in W. For use with SKU# 879.5478.
$64.99

Qualcraft 2200 Pump Jack, Steel

Steel construction. Adjustable to any height up to 30 ft. Your weight does the work. Raise or lower men and equipment. Held secure to wood poles with a positive double lock system. Raise to position with foot pump and lower with crank. Must be used in strict compliance with Federal OSHA regulations. New York State Approval No. 4781.
$139.99

Qualcraft 2201 Pump Jack Brace, Steel

Used as bracing for wood poles. Pole should be constructed in accordance with operating instructions.
$39.99

Qualcraft 2204 Workbench and Guard Rail Holder, For: Pump Jack System

The workbench and guardrail holder combo is designed for wood staging and works with the Qualcraft pump jack system. This system allows tools and materials to travel alongside the work platform with ease.
$84.99

Qualcraft 2210 Pump Jack Pole Anchor, For: 2 x 4 Double Wood Poles

The Pump jack pole anchor fits double 2x4 wood poles and provides an additional margin of safety and security on your jobsite. In loose soil conditions, this anchor also provides mud sill.
$42.99

Qualcraft 2300 Side Wall Staging Bracket

The folding side wall staging bracket provides platform safety and convenience. This staging bracket is rated for two workers and additional 75 lb of weight per 8 ft section. The bracket folds for compact storage and easy transportation.
$59.99

Qualcraft 2500 Roof Bracket, Adjustable, Steel, For: Variable Pitched Roofs

The adjustable roofing bracket attaches to the our pump jack system to offer a sturdy, flat surface to stand on while roofing or working at heights. The bracket features a durable all-steel construction with an adjustable 6 in or 10 in platform. This product is designed to be used with 2 in x 6 in or 10 in planks, the bracket allows for easy installation and removal without damaging shingles. Already compliant with OSHA regulations, it is recommended to use at least on bracket per every 8 ft of spacing.
$12.99

Qualcraft 2501 Fixed Roof Bracket, Adjustable, Steel, Red, Powder-Coated, For: 12/12 Fixed Pitch Roofs

Providing a complete range of roof brackets, Qualcraft offers fixed and adjustable roof brackets for all roof pitches and materials including slate. Durable, easy-to-install and remove and designed to protect all roof surfaces, Qualcraft is the only name you'll need to remember for professional roofing tools. Capacity is one worker plus 40 lb/8 ft staging. Maximum of 8 ft of spacing between brackets.
$12.99

Qualcraft 2502 Fixed Roof Bracket, Adjustable, Steel, Red, For: Slideguard or Material Support on Low Slope Roofs

Providing a complete range of roof brackets, Qualcraft offers fixed and adjustable roof brackets for all roof pitches and materials including slate. Durable, easy-to-install and remove and designed to protect all roof surfaces, Qualcraft is the only name you'll need to remember for professional roofing tools. Capacity is one worker plus 40 lb/8 ft staging. Maximum of 8 ft of spacing between brackets.
$12.99

Qualcraft 2510 Roof Bracket, Adjustable, Maple Hardwood/Steel, Galvanized

The adjustable wood/steel roof bracket is made of heavy-duty wood and 15 ga galvanized steel construction. The roofing bracket is designed to hold a 12 in platform. Adjustable to two positions (45 and 60 deg) and can be easily installed and removed without damaging the shingles. This durable bracket includes a platform retainer and a unique locking mechanism for additional safety. The capacity is one worker per every 8 ft of staging with a maximum span of 8 ft between brackets.
$22.99

Qualcraft 2601 Wall Jack, Portable, Malleable Iron, Red, Powder-Coated

The wall jack is used to raise walls and beams and tighten flooring and decking. Made of heavy-duty, malleable cast iron, the wall jack rides up and down on a 2 by 4 ft pole, working like a car jack for dozens of construction uses. To lift walls and beams insert a length of 3/4 in (OD) pipe (not included) to act as a lever. The wall jack has a capacity of 1000 lb with the use of a 2 x 4 (actual measurement is 1-1/2 in by 3-1/2 in) made of clear, straight-grained fir wood, free of knots and defects. The jack is intended to meet OSHA safety regulations when instructions are carefully followed. The wind hook accessory kit provides a complete wall lifting system and can be purchased separately and includes base plate and wind hook cable assembly.
$249.99

WERNER 5507-19 Aluma-Plank, 7 ft L, 19-1/16 in W, Aluminum

5500 Series aluminum decked ALUMA-PLANK® for use with steel scaffolds. Duty rating is 75 lb/sq-ft. Perforated tread for slip resistance.
$179.99

WERNER AC10-20-02 Ladder Jack, Aluminum, For: 300 lb Type IA and 375 lb Type IAA Extension Ladders

The AC10-20-02 two rung long body ladder jack is designed for quick field adjustments. The platform clamp system clamp secures the platform to the ladder jacks and ties supporting ladders together to help secure an entire ladder jack system. The lightweight but sturdy jack mounts on either side of the extension ladder. It accepts stages up to 20 in width. Recommended for use with 300 lb Type IA and 375 lb Type IAA extension ladders.
$149.99

WERNER AP-20-MP6 Platform Work, 12 in L, 39-1/2 in W, Aluminum, Silver

The AP-20 portable work platform with large standing area for working from side to side. Works great for along walls and windows. Platform legs lock securely in place when in use and fold underneath platform for compact storage. 225 lb load capacity.
$49.99

WERNER PA200 Series PA208 Extension Plank, 8 to 13 ft L, 14 in W, Aluminum

The PA200 Series aluminum extension planks are ideal for use on stepladders, telescoping multi-ladders, extension trestle ladders and extension and single straight ladders equipped with ladder jacks. Positive stops on the plank prevent overextending. Molded thermo-plastic spacer guides allow for easy open or close action. Made of 2 in deep box section extrusions. Heavy end flange or handles for rigidity and ease of operation. Outer flange is open for ladder jack clamps. The extruded cross members are riveted with solid aluminum rivets. Locking mechanism sets the plank in 12 in increments. 250 lb load capacity.
$269.99

WERNER PS-48 Portable Rolling Scaffold, 12 to 36 in H Adjustment, 500 lb

The PS-48 Portable Scaffold is a versatile, portable 4 ft scaffold that can be used as a push cart, working scaffold, storage shelf or work bench. Contains two planks with combined 500 lb load capacity. Planks adjust to different working heights of 12 in, 24 in or 36 in. Non-marring wheels prevent damage to floor by securely locking into place. Multi-use S-hooks make transportation easy and are ToolLasso® ready.
$149.99
;