Siding Tools

View as Grid List
Sort by
Display per page

ALLWAY TOOLS SW100 Siding Wedge

Aluminum wedges, eliminate moisture and peeling paint on exterior walls. Insert easily under siding or clapboard to ventilate walls. Use flat blade screwdriver, bagged.
$11.99

GENERAL SS211 Cement Shear, Steel Handle

The manual fiber cement shear SS211 cuts up to 12 in wide material with adjustable fence or unlimited widths and angle cutting with fence removed. Blade design delivers unbeatably clean, accurate cutting. Dust-free indoor and outdoor operation. User-replaceable hardened tool-steel blade for extremely long blade life. For fiber cement products up to 5/16 in thick.
$199.99

Malco FCFG Fiber Cement Siding Gauge, 10-7/8 in L, Nylon, Red

Using the facing gauge while working across the width of the plank assures greater accuracy of the desired exposure and guards against sagging. The FCFG facing gauge may also be used in combination with the Malco FCG2 overlap gauge to prop up one end of the plank for one-person application.
$17.99

Malco FCG2 Fiber Cement Siding Gauge, 6 in L, Steel, Silver

Strong, one-piece tempered spring steel construction with precision-ground tip assures gauge will grip behind siding plank. No adjustments to vary and nothing to mark. Will not mar finish of pre-painted siding. Works with 5/16 in (7.9 mm) fiber cement siding. Permits one person application of panels. Two gauges support entire length of panel and precisely gauge a standard 1-1/4 in (31.2 mm) overlap.
$29.99

Malco JCCR J-Channel Cutter

Malco J-Channel Cutter, 1-Piece, Steel, Redline, 5/8 in Cutting Capacity, Heat Treated Steel Blade, 1-1/4 in Blade, 8-7/8 in Overall Length, Ergonomic Soft-Touch, Non-Slip Handle, Nickel Chrome Plated, Red, 0.841 in Width of Cut, For Making Drain Tabs, Downstream Notch Cutouts and 45 deg Miter Trim Cuts
$42.99

Malco SRT2 Siding Removal Tool, Angled Blade, Vinyl Handle, 6-1/4 in OAL

The Malco SideSwiper model SRT2, is a vinyl siding removal tool that combines the comfort and added leverage of an easy-to-grasp straight handle, with the smooth unlocking motion of a burr-free hook. The blade of the removal tool is angled from the bottom plane of the handle and allows the user to keep their wrist straight while keeping knuckles well above the work. The surface finishing and plating of the blade assures that the sharply angled hook will not cut into the vinyl material or produce shavings. Additional comfort and control is achieved with a non-slip textured handle grip. The gripping surface will not become slick from moisture and the form fitting, plastisol dip process bonds the grip for the life of the tool.
$8.69

PACTOOL Gecko Gauge SA903 Siding Gauge, 5 to 8 in L, Plastic

The Gecko gauge SA903 gauges and supports cement-board siding for one-person installation with nearly no layout time. It is adjustable at 1/4 in increments for 4 to 8 in siding reveals. It won't scratch or mar pre-painted siding. The friction-cam mechanism supports full 12 ft cement-board siding lengths. It can be used with 5/16 in fiber-cement siding products, including James Hardie's updated HZ5 Series with new eased drip-edge profile.
$74.99

PACTOOL Gecko Gauge SA90338 Siding Gauge, 8-1/2 in L, 2 in W, Green

The Gecko gauge SA90338 gauges and supports LP siding for one-person installation with nearly no layout time. This gauge is for use with 3/8 in thick LP siding products. It is adjustable at 1/4 in increments for 4 to 8 in siding reveals, the friction-cam mechanism supports full 16 ft LP siding lengths. It won't scratch or mar pre-painted siding.
$79.99

PACTOOL Gecko Gauge SA90376 Siding Gauge, 8-1/2 in L, 2 in W, Vinyl

The Gecko gauge SA90376 gauges and supports LP siding for one-person installation with nearly no layout time. This gauge is for use with 7/16 in thick LP siding products. It is adjustable at 1/4 in increments for 4 to 8 in siding reveals, the friction-cam mechanism supports full 16 ft LP siding lengths. It won't scratch or mar pre-painted siding.
$79.99

VanMark TrimMaster Mark II Series TM10 Metal Bender, 26 ga Bending, Nylon

Building upon the reputation of the Mark I Series™, the Mark II TrimMaster® arrives with leading technologies such as the POWER slot™ hinge, easier bending, making smaller J channels and hollow core hinge extrusions for added strength. We've also left you the ability to make fine-tune adjustments to this brake, though you may never have to. Ultra high molecular weight polymer wedges are independently adjustable and replaceable should the occasion ever arise.
$1,899.99

VanMark UniStand USA1 Collapsible Stand with Wheel, 6 in H, Steel, For: 14 in Brakes

The UniStand™ adjustable was designed to provide a stand as strong as Van Mark's bending brakes are. We developed a stand that is both rigid, durable and adjustable to meet the user's need. The wheels now make it easy to transport your tool anywhere on the jobsite.
$529.99
;