Specialty Construction Hardware

View as Grid List
Sort by
Display per page

2x4basics 90110 Flip Top Bench Table, Wood, Sand

Make a comfortable, sturdy bench and a table up to 8 ft long. Just add 2x4 lumber pieces. Flips and locks from a bench to a table in seconds without using tools. Slide lock safely secures and locks in position. Made of maintenance-free structural resin. Use only one or slide two Bench Tables together for a full size picnic table. Good for small porches and decks. Assembled unit stands 34 in H in the bench position, 31 in H in the table position and both with 17-1/2 in H seat. Includes Bench Table legs, hardware and instructions. Lumber not included.
$67.99

2x4basics 90128 Shelf Link

You can determine the size and configuration, just add 2x4's to the ShelfLinks to make functional and custom shelving in any length, height and configuration. Made of structural resin. Can support spans up to 8 ft. Includes ShelfLinks, hardware and instructions. Lumber not included.
$42.99

2x4basics 90158 Workbench Kit, Resin, Black

Create a workbench, worktable or power tool stand. Add 2x4's plywood or particleboard to make a workbench, worktable or power tool stand in any length or width up to 8 ft L x 4 ft W. Simple assembly in less than an hour with only powered screwdriver and a saw. Only straight, 90 deg cuts required, no miter or angles. Made of structural resin. Kit includes: 4 legs, hardware and instructions. Lumber and shelf links not included.
$77.99

Acorn International BC214 Rod Chair, Plastic

Support rebar in concrete slabs and foundations. Designed to fit both 3/8 and 1/2 in rebar. Flat base design adds to stability of reinforcing while pouring concrete. Bag of 500.
$54.99

Acorn International BC314 Rod Chair, Plastic

Support rebar in concrete slabs and foundations. Designed to fit both 3/8 and 1/2 in rebar. Flat base design adds to stability of reinforcing while pouring concrete. Bag of 500.
$79.99

BILLY PENN 08201 Rod Chair, Metal

Used to hold rebar off grade and centered in the foundation trench.
$31.99

Grabber Construction Deckmaster DMP100-10 Hidden Bracket, Powder-Coated

When using the Grabber Deckmaster fastening system, all fasteners are hidden beneath the deckboards. There is no surface penetration of the deckboards or joists. With Grabber Deckmaster there are no exposed screws a primary entry point for moisture and deck board damage. No stains or splinters form around fastener holes.
$52.99

Grabber Construction Deckmaster DMP100-100 Hidden Bracket, Powder-Coated

When using the Grabber Deckmaster fastening system, all fasteners are hidden beneath the deckboards. There is no surface penetration of the deckboards or joists. With Grabber Deckmaster there are no exposed screws a primary entry point for moisture and deck board damage. No stains or splinters form around fastener holes.
$379.99

Grabber Construction Deckmaster DMP175-10 Hidden Bracket, Powder-Coated

When using the Deckmaster fastening system, all fasteners are hidden beneath the deckboards. There is no surface penetration of the deckboards or joists. With Deckmaster there are no exposed screws a primary entry point for moisture and deck board damage. No stains or splinters form around fastener holes.
$52.99

Grabber Construction Deckmaster DMP175-100 Hidden Bracket, Powder-Coated

When using the Deckmaster fastening system, all fasteners are hidden beneath the deckboards. There is no surface penetration of the deckboards or joists. With Deckmaster there are no exposed screws a primary entry point for moisture and deck board damage. No stains or splinters form around fastener holes.
$379.99

Metaltite 92525 Self-Drilling Screw, Carbon Steel, Galvanized

Self-drilling tapping screws for fastening polycarbonate and PVC directly to aluminum and steel supporting members. Hex-head with weatherseal washer.
$9.99

MiTek B66 d, Steel, G90 Galvanized

Multi-purpose braces are designed to provide reinforcement for 90 deg wood-to-wood connections.
$6.49

MiTek LSTA Series LSTA21 Strap Ties, 20 ga Gauge, Steel, Silver, Galvanized

MiTek LSTA Strap Ties, Load Rating: 1235 lb, Material Gauge: 20 ga, Steel, Silver, Galvanized, Fasteners: Bolts, Nails, Includes: Connectors
$1.40

MiTek NA11-5MC Joist Hanger Nail, Steel, Galvanized

Proper fasteners are a critical component in a sound wood frame structure. To ensure successful installations of its connectors, USP offers a full range of structurally-rated nails. All galvanized nails supplied by USP are hot dipped for greater corrosion resistance. Any USP connector requiring a NA16D-RS or NA20D nail is shipped with the nails attached to the connector in convenient poly bags.
$22.99

MiTek NA9-5MC Joist Hanger Nail, Steel, Galvanized

Proper fasteners are a critical component in a sound wood frame structure. To ensure successful installations of its connectors, USP offers a full range of structurally-rated nails. All galvanized nails supplied by USP are hot dipped for greater corrosion resistance. Any USP connector requiring a NA16D-RS or NA20D nail is shipped with the nails attached to the connector in convenient poly bags.
$22.99

MiTek PHD2A Predeflected Holdown, 14 ga Gauge, Steel, Galvanized

PHD pre-deflected holdowns feature the pre-deflected base, minimizing deflection while providing uplift resistance. Installs with screws eliminating the need for predrilling and potential fastener slip. No thru bolts to countersink.
$24.14

MiTek PHD5A Predeflected Holdown, 14 ga Gauge, Steel, Galvanized

PHD pre-deflected holdowns feature the pre-deflected base, minimizing deflection while providing uplift resistance. Installs with screws eliminating the need for predrilling and potential fastener slip. No thru bolts to countersink.
$38.00

MiTek STS1 Stud Shoe, Steel, G90 Galvanized

Typically used with 2 in OD pipe to reinforce joists, plates, studs or rafters which have been drilled or notched during construction. Not for total member replacement in structural applications. G90 galvanized finish.
$8.69

MiTek STS2 Stud Shoe, Steel, G90 Galvanized

Typically used with 2 in OD pipe to reinforce joists, plates, studs or rafters which have been drilled or notched during construction. Not for total member replacement in structural applications. G90 galvanized finish.
$14.99

MiTek TDX2-TZ Holdown, Steel, Zinc

Used to tie first and second story framing together, anchor studs to foundations or to tie purlins to masonry or concrete. Features self-jigging, formed design with code required distances built-in. Requires 7/8 in, 5/8 and 3/4 in bolts for installation. Meets IAPMO-ES ER-0200 and FL14500 codes.
$15.99

Royal 0085208011 Panel Outside Corner, Cellular PVC, White

Ready to install, cellular PVC, paintable will not crack, split or warp and virtually maintenance-free.
$2.99

Royal 0085508011 Panel Divider, Cellular PVC, White

Ready to install, cellular PVC, paintable will not crack, split or warp and virtually maintenance-free.
$2.39

Royal 5072804 Panel Inside Corner, Cellular PVC, White

Ready to install, cellular PVC, paintable will not crack, split or warp and virtually maintenance-free.
$2.79

Royal 5072871 d, Cellular PVC, White

Ready to install, cellular PVC, paintable will not crack, split or warp and virtually maintenance-free.
$2.79

Royal 5099484 Planking Bead, Cellular PVC, White

Ready to install, cellular PVC, paintable; will not crack, split or warp, virtually maintenance-free.
$13.99

Squeek No More 1010543 Floor Squeak Repair Kit

The Squeek No More kit is designed to stop floor squeaks from above the floor by going safely through the carpet. The kit works on all carpets even berber. The Squeek No More kit has 50 screws that are scored one inch from the head and coated with a special wax that allows the screw to safely pass through the carpet. The tooling, a tripod fixture and driver bit, drives the screw safely through the carpet stopping the score on the screw slightly below the wood of the floor. Then with the tripod fixture you snap the head of the screw off. The screw thread then holds the floor to the joist without having any part of the screw sticking up that you could walk on. The kit also includes 2 joist finding tools. You use these to quickly and accurately find the joist from above the floor.
$19.99

Squeek No More 1011345 Floor Squeak Repair Screw

Specially scored waxed screws. Scored head breaks off at the same place every time. Carded.
$14.99

VESTAL 236 Brick Lintel, Steel, Black, Painted

Unique forming process develops high cross strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. Made in USA.
$14.99

VESTAL 240 Brick Lintel, Steel, Black, Painted

Unique forming process develops high cross strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. Made in USA.
$16.99

VESTAL 246 Brick Lintel, Steel, Black, Painted

Unique forming process develops high cross strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. Made in USA.
$17.99

VESTAL 750 Concrete Block Lintel, Steel, Black, Painted

Unique forming process develops high cross-sectional strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. 7 in width. For 8 in block. Made in USA.
$39.99

WallTuf 92589 Divider Molding, Vinyl, White

Trims out panels and helps achieve a water resistant finished wall. For use with "WallTuf" liner panels.
$4.79

WallTuf 92593 Wall-Tuf Rivet, Nylon, White

Rivets can be used in conjunction with adhesive when attaching WallTuf panels to a substrate. 50/BG.
$13.99
;