Specialty Valves, Parts & Accessories

View as Grid List
Sort by
Display per page
Filter by attributes

Anderson Metals 759101-0402 Straight Needle Shut-Off Valve, 1/4 x 1/8 in Compression x MIP, Brass

Straight Needle Shut-Off Valve, 1/4 x 1/8 in, Compression x MIP, Brass
$13.99

B & K 102-004 Boiler Drain Valve, 3/4 in MPT x Hose, Brass

Rising stem, six-point cast-iron handle, 3/4 in hose thread outlet, complies with ASME A112.18.1, threaded ends comply with ANSI B1.20.1. hose threads comply with ANSI B1.20.7, certified to NSF 61.
$6.99

B & K 888-221RP Multi-Size Drain Cap, For Most Drainable Valves

Fits most drainable valves. Three styles of caps with washers included.
$3.29

B & K ProLine 102-104 Boiler Drain Valve, 3/4 in FPT x Hose, Brass

Neoprene seal disc. 3/4 in male hose thread. Pipe threads comply with ANSI B1.20.1. hose threads comply with ANSI B1.20.7. Rising stem certified to NSF 61.
$7.59

B & K Quarter Master 102-053HN Boiler Drain Valve, 1/2 in MIP x Solder, Brass

Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats and rust-resistant handle. 125 psi max working pressure. 3/4 in hose thread outlet. IAPMO NSI/NSF 61 approved. Pipe threads comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, solder (sweat) ends comply with ANSI-B16.18. Bin box display packaging. Each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton.
$7.99

CAMCO 10473 Relief Valve, 3/4 in NPT, 150 psi Operating, Brass

CAMCO's 3/4 in temperature and pressure valve with 4 in probe will help protect your RV or home water heater from excessive temperature and water pressure. It's factory set at 150 psi and 210 deg F. It features epoxy-coated probe to prevent corrosion buildup.
$10.99

Decko 99490/FV441 Foot Valve, 3/4 to 1-1/2 in, Nylon

Nylon body construction. Corrosion-resistant parts. Fits four pipe sizes such as 3/4 in, 1 in, 1-1/4 in and 1-1/2 in.
$14.99

FLUIDMASTER 242 Ballcock Toilet Replacement Seal, Rubber, For 400A Toilet Fill Valve

Replacement seal for the 400A toilet fill valve is a great way to repair the fill valve without needing to purchase the entire valve.
$2.99

NDS 1001-05 Check Valve, 1/2 in FPT, 200 psi, PVC

Made of high-impact PVC Type II material. 1/2 lb spring gives positive seal with no back pressure. Reinforced poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards.
$8.99

NDS 1001-07 Check Valve, 3/4 in FPT, 200 psi, PVC

Made of high-impact PVC Type II material. 1/2 lb spring gives positive seal with no back pressure. Reinforced poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards.
$9.99

NDS 1001-10 Check Valve, 1 in FPT, 200 psi, PVC

Made of High-Impact PVC type II material. 1/2 lb spring gives positive seal with no back pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards.
$12.99

NDS 1001-12 Check Valve, 1-1/4 in FPT, 200 psi, PVC

Made of high-impact PVC Type II material. 1/2 lb spring gives positive seal with no back pressure. Reinforced poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards.
$17.99

NDS 1001-20 Check Valve, 2 in FPT, 200 psi, PVC

Made of high-impact PVC Type II material. 1/2 lb spring gives positive seal with no back pressure. Reinforced poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards.
$19.99

Simmons 400SB Series 452SB Foot Valve, 3/4 in FPT, 400 psi, Silicone Bronze

Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel perforated strainer, spring and locknut. No 404SB enters 2 in pipe. 400 psi working pressure.
$12.00

Simmons 500 SB Series 502SB Check Valve, 3/4 in FPT, 400 psi, Silicone Bronze

Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel spring, washer and locknut. All valves 1/2 in through 1-1/2 in have a working pressure of 400 psi. All valves 2 in and larger have a working pressure of 600 psi.
$39.99

Simmons 500 SB Series 503SB Check Valve, 1 in FPT, 400 psi, Silicone Bronze

Silicon bronze cast body and poppet contain less than 0.05% Lead. Furnished with Buna-N O-ring, stainless steel spring, washer and locknut. All valves 1/2 in through 1-1/2 in have a working pressure of 400 psi. All valves 2 in and larger have a working pressure of 600 psi.
$44.99

Simmons 500 SB Series 504SB Check Valve, 1-1/4 in FPT, 400 psi, Silicone Bronze

Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel spring, washer and locknut. All valves 1/2 in through 1-1/2 in have a working pressure of 400 psi. All valves 2 in and larger have a working pressure of 600 psi.
$59.99

Watts 100XL-8-150 Relief Valve, 3/4 in MNPT x FNPT, 75 to 150 psi Operating, Brass

Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. ASME rated and CSA listed. Temperature Relief of 210 deg F (99 deg C), Pressure Relief Range of 75 to 150psi (5.2 to 10.3 bar).
$19.99

Watts 3/4 LFN45BM1-U Pressure Reducing Valve, 3/4 in NPT x NPT Female, 25 to 75 psi Operating, Silicone Alloy

Series LFN45B lead-free water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure to a predetermined level, thereby protecting downstream plumbing system components and reducing water consumption. Designed for easy accessibility and serviceability without removing the valve from the line. Standard pressure setting is 50 psi with an adjustable range of 25 to 75 psi (172 to 517 kPa).
$59.99

Watts 374A Pressure Relief Valve, 3/4 in FIP, 30 to 150 psi Operating, Iron

Series 374A boiler pressure relief valves are used in hot water boiler applications to protect against excessive pressure on all types of hot water heating boiler equipment. They have an iron body construction with forged bronze inlet connections, non-metallic disc-to-metal seating, stainless steel spring and test lever. Series 374A resists corrosive water conditions, sticking and freezing and prevents water and sediment from being trapped in the seat. It is designed for emergency safety relief and shall not be used as an operating control. Standard pressure setting 30 psi. Pressure range rated up to 550,000 Btu/hr at a 30 psi setting only.
$59.99

Watts SB1156F Water Feed Regulator, 1/2 in Union Joint x FNPT, Bronze

This 1/2 in high capacity feed water pressure regulator is for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of a bronze body with union solder inlet and NPT threaded outlet connections, a tight seating check valve, purge lever for manual purging and a stainless steel strainer. It has high capacity performance and a simplified servicing design. It is suitable for use in the boiler feed lines of hydronic heating systems. The maximum pressure is 100 psi.
$59.99

WAYNE DALTON 57028-001 Check Valve Kit, 1-1/4 in NPT, Thermoplastic

Includes 2 convertible fittings and 4 hose clamps. Durable thermoplastic valve body and poppet designed to resist corrosion and to stop noise. Handles either 1-1/4 in or 1-1/2 in OD pipe.
$18.99
;