Staples

View as Grid List
Sort by
Display per page

3M 49554 Cable Stacker, Plastic, 25, Bag

3M™ cable stackers organize cable runs and aid in identification, putting an end to tangled wires and the potential heating that could occur when cables are held together tightly under a single fastener. Easy installation simplifies compliance with the spacing requirements of the National Electrical Code, article 300-4-(d) and the Canadian Electric Code Part I, Section 12-516. Made from reclaimed plastic.
$0.49

Arrow 215 Staple, 7/16 in W Crown, 5/16 in L Leg, Steel, 0.03 ga Gauge, 1000, Pack

Arrow Staple, Crown Shape: Flat, Crown Width: 7/16 in, Leg Length: 5/16 in, Material Gauge: 0.03 ga, Steel, Package Type: Pack, Package Quantity: 1000, Suitable for: TT21, JT21CM, JT27 Tools
$3.79

Arrow 256 Round Crown Staple, 5/16 in W Crown, 3/8 in L Leg, Steel, 1000, Pack

T25 staples feature a round crown design that secures wires without damaging them. The leading choice for low voltage wire applications, the T25 staple is an absolute boss when installing garage door openers, thermostat wire, doorbell wire, alarm systems and much more. Also works great on computer, CAT5/CAT6. RG6/RG9, COAX and phone cables. All Arrow T25 staples are made under strict quality controls at our Saddle Brook, NJ manufacturing plant.
$4.29

Arrow 305IP Crown Staple, 1/2 in W Crown, 5/16 in L Leg, 5040, Pack

For T32, T32MHT30 Staples & HT30 hammer guns.
$9.99

Arrow 354 Flat Crown Staple, 7/16 in W Crown, 1/4 in L Leg

For use in model P35 stapler (684.7818). Able to penetrate thicker paper stock or staple more pages together. 5040 staples per box.
$10.99

Arrow 600 Series 60430 Flat, 1/2 in W Crown, 1/4 in L Leg

For use in Swingline Desa 800, 800X, 900, 1000, 10060, 31600, 31800, 34201, 34301, 34302, 80000, 80020, Master Mechanic 174839, 345025, 136150, TRE-50MM, TRE-300MM, Sear's Craftsman 68477, 68478, 6843, 6846, 68642, 68423, 68471, 68481, Black & Decker 9701, 9700, STANLEY Parker TR70, TR75, TR80, TRE-50, TRE100, TRE300, Ace Hardware 27175, 22084 and 22087.
$2.99

Arrow 600 Series 60530 Flat, 1/2 in W Crown, 5/16 in L Leg

For use in Swingline Desa 800, 800X, 900, 1000, 10060, 31600, 31800, 34201, 34301, 34302, 80000, 80020, Master Mechanic 174839, 345025, 136150, TRE-50MM, TRE-300MM, Sear's Craftsman 68477, 68478, 6843, 6846, 68642, 68423, 68471, 68481, Black & Decker 9701, 9700, STANLEY Parker TR70, TR75, TR80, TRE-50, TRE100, TRE300, Ace Hardware 27175, 22084 and 22087.
$2.99

Arrow 600 Series 60630 Flat, 1/2 in W Crown, 3/8 in L Leg

For use in Swingline Desa 800, 800X, 900, 1000, 10060, 31600, 31800, 34201, 34301, 34302, 80000, 80020, Master Mechanic 174839, 345025, 136150, TRE-50MM, TRE-300MM, Sear's Craftsman 68477, 68478, 6843, 6846, 68642, 68423, 68471, 68481, Black & Decker 9701, 9700, STANLEY Parker TR70, TR75, TR80, TRE-50, TRE100, TRE300, Ace Hardware 27175, 22084 and 22087.
$3.79

Arrow 600 Series 60830 Flat, 1/2 in W Crown, 1/2 in L Leg

For use in Swingline Desa 800, 800X, 900, 1000, 10060, 31600, 31800, 34201, 34301, 34302, 80000, 80020, Master Mechanic 174839, 345025, 136150, TRE-50MM, TRE-300MM, Sear's Craftsman 68477, 68478, 6843, 6846, 68642, 68423, 68471, 68481, Black & Decker 9701, 9700, STANLEY Parker TR70, TR75, TR80, TRE-50, TRE100, TRE300, Ace Hardware 27175, 22084 and 22087.
$4.29

Arrow JT21 Series 214 Flat Crown Staple, 1/4 in W Crown, 1/4 in L Leg, 0.03 ga Gauge, 1000, Pack

JT21 staples are the T50's little brother. Although often referred to as light duty, there's really nothing "Light" about them. Built with the same quality and precision as the T50, these staples utilize a thinner wire in a smaller staple format to deliver great holding power. They are exceptionally easy to fire, making JT21 staples a favorite with crafters, women and those with limited grip strength. Used for general home repairs, crafting, art projects and upholstery. Still proudly made in the USA.
$2.99

Arrow P22 Series 224 Flat Crown Staple, 7/16 in W Crown, 1/4 in L Leg, 5050, Pack

Designed specifically for stapling paper, P22 staples are used on desktops and counters in restaurants, dry cleaners, floral shops, schools and homes around the world. The P22 staple is specially designed to fit the Arrow P22 plier stapler and is great for use on bags, tags, papers and labels. Available in two leg lengths and proudly made in the USA, the P22 staple makes everyday paper fastening a breeze.
$3.49

Arrow P22 Series 225 Flat Crown Staple, 7/16 in W Crown, 5/16 in L Leg, 5050, Pack

Designed specifically for stapling paper, P22 staples are used on desktops and counters in restaurants, dry cleaners, floral shops, schools and homes around the world. The P22 staple is specially designed to fit the Arrow P22 plier stapler and is great for use on bags, tags, papers and labels. Available in two leg lengths and proudly made in the USA, the P22 staple makes everyday paper fastening a breeze.
$3.79

Arrow P35 Series 356 Flat Crown Staple, 7/16 in W Crown, 1/4 in L Leg

For use in model P35 stapler (684.7818). Able to penetrate thicker paper stock or staple more pages together. 5040 staples per box.
$12.99

Arrow T20 Series 206 Flat Crown Staple, 5/16 in W Crown, 3/8 in L Leg

For upholstery, insulation, weather stripping and more. Fits T2025 staple gun tacker.
$3.99

Arrow T20 Series 208 Flat Crown Staple, 5/16 in W Crown, 1/2 in L Leg

For upholstery, insulation, weather stripping and more. Fits T2025 staple gun tacker.
$3.99

Arrow T25 Series 257 Round Crown Staple, 5/16 in W Crown, 7/16 in L Leg, 1000, Pack

For use in No. T-25 low voltage wire staple gun tacker.
$4.29

Arrow T25 Series 259 Round Crown Staple, 5/16 in W Crown, 9/16 in L Leg, 1000, Pack

For use in No. T-25 low voltage wire staple gun tacker.
$4.59

Arrow T30 Series 306IP Flat Crown Staple, 1/2 in W Crown, 3/8 in L Leg

For T32, T32MHT30 Staples & HT30 hammer guns.
$9.99

Arrow T50 Series 50424 Flat Crown Staple, 3/8 in W Crown, 1/4 in L Leg

The T50 staples are made of 0.05 wire. They come 1250 to a pack.
$3.79

Arrow T50 Series 50524 Flat Crown Staple, 3/8 in W Crown, 5/16 in L Leg, 1250, Pack

The T50 staples are made of 0.05 wire. They come 1250 to a pack.
$3.79

Arrow T50 Series 50624 Flat Crown Staple, 3/8 in W Crown, 3/8 in L Leg

The T50 staples are made of 0.05 wire. They come 1250 to a pack.
$3.99

Arrow T50 Series 506IP Flat Crown Staple, 3/8 in W Crown, 3/8 in L Leg

For use in Arrow No. ET50, ETC50, ETN50, ETF50, ETF50BN, T55C, T55, T50, T50PBN staple gun tackers and ETC50 cordless gun tacker.
$12.99

Arrow T50 Series 50824 Flat Crown Staple, 3/8 in W Crown, 1/2 in L Leg

The T50 staples are made of 0.05 wire. They come 1250 to a pack.
$4.59

Arrow T50 Series 508SS1 Flat Crown Staple, 3/8 in W Crown, 1/2 in L Leg, 1000, Pack

T50 staples are the world's top-selling heavy-duty staple platform. Made to deliver exceptional holding power, these staples are used for all heavy-duty stapling applications - from installing insulation, housewraps and roofing underlayments to upholstering fine furniture and window treatments. A true workhorse of a fastener, Arrow T50 staples are made to precise specifications on state-of-the-art equipment at our manufacturing plant in Saddle Brook, NJ, USA.
$12.99

Bostitch PowerCrown STCR26195/16 Crown Staple, 7/16 in W Crown, 5/16 in L Leg, 5000, Pack

7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
$8.99

Bostitch PowerCrown STCR50191/2-1M Crown Staple, 7/16 in W Crown, 1/2 in L Leg, Glue Collation, 5000, Pack

7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
$6.99

Bostitch PowerCrown STCR50191/2-4M Crown Staple, 7/16 in W Crown, 1/2 in L Leg, 4000, Pack

7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
$15.99

Bostitch PowerCrown STCR50191/4-6M Crown Staple, 7/16 in W Crown, 1/4 in L Leg, 5000, Pack

7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
$21.99

Bostitch PowerCrown STCR50193/8-1M Crown Staple, 7/16 in W Crown, 3/8 in L Leg, 5000, Pack

7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
$5.69

Bostitch PowerCrown STCR50193/8-5M Crown Staple, 7/16 in W Crown, 3/8 in L Leg, 5000, Pack

7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
$23.99

Bostitch PowerCrown STCR50199/16-1 Crown Staple, 7/16 in W Crown, 9/16 in L Leg, 5000, Pack

7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.
$8.99

GB GSE-105 Strap Staple, PVC, 5, Pack

These Gardner Bender #6 service entrance cable straps 5 pack secure cable and are designed for recessed nail heads when the strap is fully driven into wood.
$1.99

GB GSE-15410 Staple, 1-1/8 in W Crown, 1-1/2 in L Leg, Steel, 10, Box

The Gardner Bender 2-7/16 in x 1-1/16 in steel staples for 4/3 and 2/3 service entrance cable 10 pack install cable easily onto wood surfaces. These staples offer sharp offset legs that resist splitting wood and feature a burr-free construction.
$1.79

GB GSE-205 Strap Staple, Plastic, 5, Pack

The Gardner Bender gray plastic service entrance cable straps for #2 SER cable 5 pack accommodate larger sized electrical cable. These straps offer zinc-plated nails for rust- and corrosion protection.
$1.79

GB GSE-304 Strap Staple, Polyethylene, 4, Carded

The Gardner Bender gray plastic service entrance cable straps for #2 SER cable 4 pack accommodate larger sized electrical cable. These straps offer zinc-plated nails for rust- and corrosion protection.
$1.99

GB GSE-310 Staple, 13/16 in W Crown, 1-3/8 in L Leg, Steel, 100, Pack

The Gardner Bender 3/16 in x 1-3/8 in gray steel staples for service entrance cables 100 pack fasten a variety of cable sizes. These straight-driving staples won't split or splinter wood.
$2.99

GB GSE-402 Strap Staple, Polyethylene, 30, Carded

Plastic insulated straps secure service entrance cable. Electro-zinc-plated nails. Cradles constructed of polyethylene. Straps stabilized against UV rays and extreme cold, withstands deterioration and breakage.
$1.79

GB GSE-505 Insulated, 5/8 in W Crown, 1-3/4 in L Leg, Polyethylene, Electro-Plated, 5, Pack

Service entrance cable strap or staple designed for securing larger sized electrical cable onto wood surfaces. Stabilized polyethylene saddle withstands both extreme cold and UV rays without cracking or deteriorating. Designed to cradle and protect delicate cable insulation during installation. Zinc-plated nails resist rust and corrosion and recess fully into the strap to eliminate snags. Secures NO 6 SER service entrance cable. Assembled in USA with components from USA and China.
$1.79

GB MCS-20W Snapshot Multi-Cable Staple, Polypropylene, 20, Pack

Organizes and secures multiple cable runs on a stud. Secures NM/Romex, coaxial and CAT 5 all on the same staple. Snap lock gate quickly and easily secures all cables. Self-centering tab guides ideal placement on the stud. Secures with a nail or staple for wood studs. Cable combinations eight NM-B Flat 14-2.
$6.99

GB MDI-1550Y High-Impact, 1/2 in W Crown, 1 in L Leg, Carbon Steel

Insulated staples protect and secure Romex, NM, BX and UF. PVC insulation protects cable from damage due to mis-hit and overdriving, prevents a short circuit if wire insulation is damaged. Highly visible color coded for size and application. 40 per card.
$2.59

GB MPS-2080 Cable Staple, 5/16 in W Crown, 7/8 in L Leg, Metal/Plastic, 250, Pack

Smooth color saddle prevents damage to insulation. Secures round and flat cable. Legs have 2 barbs for holding strength in wood. For use in CableBoss staple gun.
$8.99

GB MPS-2125 Cable Staple, 1/2 in W Crown, 7/8 in L Leg, Metal/Plastic, 200, Pack

Smooth color saddle prevents damage to insulation. Secures round and flat cable. Legs have 2 barbs for holding strength in wood. For use in CableBoss staple gun.
$7.99

GB MS-150 Contractor Length, 1/2 in W Crown, 1-1/4 in L Leg, Metal, Graphite, 100, Box

The Gardner Bender 1-1/4 in x 1/2 in graphite metallic steel staples for NM cables are designed to secure 14/2, 12/2 and 10/2 NM cables. These straight-driving, burr-free, steel staples feature sharper tips so the legs drive in straight without splitting wood and have recessed heads to protect cable jackets. Virtually oil-free for cleaner handling and engineered to contractor preferred length. Designed to be driven into wood with a hammer. Made in the USA.
$3.49

GB MS-1550T Contractor Length, 1/2 in W Crown, 1-1/8 in L Leg, Metal, Graphite, 24, Pack

The Gardner Bender 1/2 in graphite metal staples 24-pack are ideal for securing non-metallic cable. These staples feature durable metal construction with a graphite metallic finish. The recessed heads help protect your cable and the sharp tips offer an easy start. These staples can be driven in with a hammer.
$2.19

GB MS-1555 Contractor Length, 1/2 in W Crown, 1-1/8 in L Leg, Metal, Graphite, 50, Carded

Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
$2.99

GB MS-1575T Contractor Length, 9/16 in W Crown, 1-1/4 in L Leg, Metal, Graphite, 18, Pack

The Gardner Bender 9/16 in graphite metal staples 18-pack feature durable metal construction with a graphite metallic finish. These staples are ideal for securing non-metallic cable and can be drive in with a hammer. The recessed heads help protect your cable and the sharp tips help the staples start easily.
$1.99

GB MS-1577 Contractor Length, 9/16 in W Crown, 1-1/4 in L Leg, Metal, Graphite, 50, Pack

These 1-1/4 in x 9/16 in graphite metallic steel staples are designed to secure 14/3, 12/3 and 10/3 NM cables. These strong steel staples feature burr-free, sharper tips so the legs drive in straight without splitting wood and are engineered with recessed heads to protect cable jackets. Virtually oil-free for cleaner handling and manufactured to contractor preferred length. Designed to be driven into wood with a hammer. Made in the USA.
$3.49

GB MS-175 Contractor Length, 9/16 in W Crown, 1-1/4 in L Leg, Metal, Graphite, 100, Box

The Gardner Bender 1-1/4 in x 1/2 in graphite metallic steel staples for NM cables are designed to secure 14/2, 12/2 and 10/2 NM cables. These straight-driving, burr-free, steel staples feature sharper tips so the legs drive in straight without splitting wood and have recessed heads to protect cable jackets. Virtually oil-free for cleaner handling and engineered to contractor preferred length. Designed to be driven into wood with a hammer. Made in the USA.
$2.99

GB MS-450BX/J Contractor Length, 9/16 in W Crown, 1-1/4 in L Leg, Metal, Graphite, 450, Box

These 1-1/4 in x 9/16 in graphite metallic steel staples are designed to secure 14/3, 12/3 and 10/3 NM cables. These strong steel staples feature burr-free, sharper tips so the legs drive in straight without splitting wood and are engineered with recessed heads to protect cable jackets. Virtually oil-free for cleaner handling and manufactured to contractor preferred length. Designed to be driven into wood with a hammer. Made in the USA.
$8.99
;