Switch Boxes

View as Grid List
Sort by
Display per page

Allied Moulded FiberglassBOX 1098-N Electrical Wall Box, 1-Gang, Fiberglass Reinforced Polyester BMC, Beige/Tan

Thermoset fiberglass with angled mid-nails. Nails are installed as fastening devices. 2 hrs wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. UL listed.
$1.69

Allied Moulded FiberglassBOX 1099-N Electrical Box, 1-Gang, 2-Outlet, 4-Knockout, Beige/Tan

Thermoset fiberglass with angled mid-nails. Nails are installed as fastening devices. 2 hrs wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. UL listed.
$1.99

Allied Moulded FiberglassBOX 2300-NK Electrical Wall Box, 2-Gang, Fiberglass/Polyester, Beige/Tan

Thermoset fiberglass with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2 hrs wall fire rating. 3 in x 4 in x 3-3/4 in. UL listed.
$4.29

Allied Moulded FiberglassBOX 3300-NK Electrical Wall Box, 3-Gang, 6-Outlet, 12-Knockout, Beige/Tan

Thermoset fiberglass with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2 hrs wall fire rating. 3 in x 5-11/16 in x 3-3/4 in. UL listed.
$5.99

Allied Moulded FiberglassBOX 9318 Electrical Box, 1-Gang, 4-Knockout, Thermoset Fiberglass, Beige/Tan

Thermoset-fiberglass handy box. Surface mounted, with side and bottom Romex cable openings. 2 in D x 2-1/4 in W x 4-3/16 in H. UL listed.
$2.99

Carlon E382DE Switch Box, 2-Gang, 7-Outlet, PVC, Gray

For use with non-metallic wiring systems. Non-conductive, noncorrosive and impact-resistant for a safe, long, service-free life in exposed applications. Install in accordance with NEC and local codes. Three 1/2 in plus four 3/4 in threaded ports. UL listed.
$9.99

Carlon E9802E-CTN Switch Box, 2-Gang, 1-Outlet, PVC, Gray

For dead-end terminations where two devices or additional wiring capacity is required. Integral mounting feet. 32 cu-in capacity. Type 2FSE UL listed.
$6.99

Carlon E980DFN-CTN Switch Box, 1-Gang, 1-Outlet, PVC, Gray

Safe, non-conductive. For dead-end terminations. With integral mounting feet. Will not rust or corrode. 18 cu-in capacity. UL listed.
$4.99

Carlon E980EFN-CTN Switch Box, 1-Gang, 1-Outlet, PVC, Gray

Safe, non-conductive. For dead-end terminations. With integral mounting feet. Will not rust or corrode. 18 cu-in capacity. UL listed.
$4.99

Carlon E981DFN Switch Box, 1-Gang, 2-Outlet, PVC, Gray, Vertical Mounting

Carlon Switch Box, 2-Outlet, 1-Gang, Cubic Capacity: 18 cu-in, 2.30 in W x 2.80 in D x 4.54 in H Dimensions, PVC, Gray, Vertical Mounting
$4.99

Carlon E981DFN-CTN Switch Box, 1-Gang, 2-Outlet, PVC, Gray

Safe, non-conductive, takes standard covers and accessories. For through terminations. With detachable mounting feet. 19 cu-in capacity.
$4.99

Carlon E981EFN Switch Box, 1-Gang, 2-Outlet, PVC, Gray, Vertical Mounting

Carlon Switch Box, 2-Outlet, 1-Gang, Rectangular, Cubic Capacity: 18 cu-in, 4.54 in L x 2.80 in W x 2.30 in D Dimensions, PVC, Gray, Vertical Mounting
$5.39

Carlon E981EFN-CTN Switch Box, 1-Gang, 2-Outlet, PVC, Gray

Safe, non-conductive, takes standard covers and accessories. For through terminations. With detachable mounting feet. 19 cu-in capacity.
$4.99

Carlon E982DFN-CTN Switch Box, 1-Gang, 2-Outlet, PVC, Gray

For multiple dead-end circuit terminations or where additional support is required in stub-up applications. Takes standard covers and accessories or devices. 18 cu-in capacity.
$5.69

Carlon FSEB-075050 Combination Electrical Box, 1-Gang, PVC, Gray, Ceiling, Wall Mounting

PVC outdoor single gang device FSE box. 1 x 3/4 in unthreaded hub plus reducing bushing. Use proper weatherproof cover.
$6.99

Orbit 4SDB-50/75 Switch Box, 2-Gang, 16-Knockout, 1/2, 3/4 in Knockout, Steel, Gray, Galvanized

Orbit Switch Box, Number of Knockouts: 16, Knockout Size: 1/2, 3/4 in, Square, Dimensions: 4 in W x 2-1/8 in D x 4 in H, Steel, Galvanized
$2.59

Orbit 6358469 Switch Box, 1-Gang, 7-Knockout, 1/2 in Knockout, Steel, Galvanized, Bracket Mounting

Orbit Industries 2-1/2 in deep gangable switch boxes are used in the installation of switches. Orbit Industries includes a variety of gangable switch boxes with non-metallic cable clamps, metal clad cable clamps and old work tigergrips. The wide tigergrip design is a non-gangable, wide old-work switch box for easy installation of GFCI or other large devices. Use with a midi or oversized switch plate.
$2.79

Orbit D4SB-50/75 Switch Box, 2-Gang, 16-Knockout, 1/2, 3/4 in Knockout, Steel, Gray, Galvanized

Orbit Switch Box, Number of Knockouts: 16, Knockout Size: 1/2, 3/4 in, Square, Dimensions: 4 in W x 1-1/2 in D x 4 in H, Steel
$1.19

Orbit D4SB-50-FB Switch Box, 1-Gang, 13-Knockout, 1/2 in Knockout, Steel, Gray, Galvanized, Flush Mounting

Orbit Switch Box, Number of Knockouts: 13, Knockout Size: 1/2 in, Square, Dimensions: 4 in W x 1-1/2 in D x 4 in H, Steel
$2.19

Orbit DHB-2 Drawn Handy Box, 2-Gang, 2-Outlet, 12-Knockout, 1, 1/2, 3/4 in Knockout, Steel, Gray, Galvanized

Orbit Industries multi-gang switch boxes are used in the installation of lighting fixtures, switches and other devices. They are constructed from 16 ga galvanized steel. They feature raised ground emboss and the device ears allow easy installation of electrical devices. Models support multiple gangs ranging from two to four-gang. Selected models include a B bracket to directly mount on the front face of a wood stud or an FB bracket to mount on the flat side of a stud.
$6.49

Orbit DHB-2-FB Drawn Handy Box, 2-Gang, 2-Outlet, 10-Knockout, 1, 1/2, 3/4 in Knockout, Steel, Gray

Orbit Industries multi-gang switch boxes are used in the installation of lighting fixtures, switches and other devices. They are constructed from 16 ga galvanized steel. They feature raised ground emboss and the device ears allow easy installation of electrical devices. Models support multiple gangs ranging from two to four-gang. Selected models include a B bracket to directly mount on the front face of a wood stud or an FB bracket to mount on the flat side of a stud.
$6.49

Orbit GB-1-NM-OW Gangable Switch Box, 1-Gang, 1-Outlet, 7-Knockout, 1/2 in Knockout, Steel, Gray, Galvanized

Orbit Industries 2-1/2 in deep gangable switch boxes are used in the installation of switches. Orbit Industries includes a variety of gangable switch boxes with non-metallic cable clamps, metal clad cable clamps and old work tigergrips. The wide tigergrip design is a non-gangable, wide old-work switch box for easy installation of GFCI or other large devices. Use with a midi or oversized switch plate.
$5.69

Orbit GBV-OW Switch Box, 1-Gang, 1-Outlet, 1-Knockout, 1/2 in Knockout, Steel, Gray, Galvanized

Orbit Industries gangable switch boxes with beveled corners are used in the installation of switches and other devices in shallow walls. They are constructed from 16 ga galvanized steel. Non-metallic clamps are installed through the beveled corners for ease of installation. Selected models include brackets for direct installations on stud, leveling bumps or locking grips for old work.
$3.79

Orbit GDB-1-NM Switch Box, 1-Gang, 1-Outlet, 11-Knockout, 1/2 in Knockout, Steel, Gray, Galvanized

Orbit Industries 3-1/2 in deep gangable switch boxes are used in the installation of switches. Models include a pre-assembled 10 to 32 grounds screw and a solid #12AWG 7 in pigtail for ground applications. They are constructed from 16 ga galvanized steel. Orbit Industries selection includes a variety of gangable switch boxes with non-metallic cable clamps, metal clad cable clamps and old work tigergrips.
$3.79

Orbit GDB-1-NM-FB Gangable Switch Box, 1-Gang, 1-Outlet, 11-Knockout, 1/2 in Knockout, Steel, Gray, Galvanized

Orbit Industries 3-1/2 in deep gangable switch boxes are used in the installation of switches. Models include a pre-assembled 10 to 32 grounds screw and a solid #12AWG 7 in pigtail for ground applications. They are constructed from 16 ga galvanized steel. Orbit Industries selection includes a variety of gangable switch boxes with non-metallic cable clamps, metal clad cable clamps and old work tigergrips.
$4.79

Orbit GSB-1 Gangable Switch Box, 1-Gang, 1-Outlet, 8-Knockout, 1/2 in Knockout, Steel, Gray, Galvanized

Orbit Industries shallow gangable switch boxes are used in the installation of switches, receptacles and other electrical devices. They are constructed from 16 ga galvanized steel. These 2 in deep boxes are shallow to suit specific needs. The ears on the top and bottom of the box assist in old work applications. Selected models include non-metallic cable clamps, metal clad cable clamps and locking grips for old work.
$2.99

Orbit MSB-4-FB Masonry Box, 4-Gang, 3-Outlet, 14-Knockout, 1/2, 3/4 in Knockout, Steel, Gray, Galvanized

Orbit Industries masonry boxes are used in the installation of electrical fittings and other devices in masonry walls. They are constructed from 16 ga galvanized steel. These 2-1/2 in deep, welded boxes with device ears include an FB bracket to directly mount on the flat side of a stud. Models range from three to five-gang switch boxes.
$15.99

RACO 400 Switch Box, 1-Gang, 1-Outlet, 3-Knockout, 1/2 in Knockout, Steel, Gray, Galvanized, Screw Mounting

Gangable 3 in x 2 in switch box, offers the option of constructing a box to hold two or more devices. Two 1/2 in conduit knockouts (end). One 1/2 in conduit knockout (bottom). Plaster ears allow the box to be used in old work applications. Acceptable for use in 2 hrs rated fire walls. 1-1/2 in D. 7.5 cu-in. UL listed.
$2.79

RACO 410 Switch Box, 1-Gang, 1-Outlet, 4-Knockout, Steel, Gray, Galvanized

Four cable knockouts on the end. 3 in x 2 in x 1-1/2 in D. 7.5 cu-in. With clamps for non-metallic sheathed cable. Plaster ears allow the box to be used in old work applications. Acceptable for use in 2 hrs fire rated walls. UL listed.
$2.99

RACO 473 Switch Box, 1-Gang, 1-Outlet, 3-Knockout, 1/2 in Knockout, Steel, Gray, Galvanized

Gangable 3 in x 2 in switch box, offers the option of constructing a box to hold two or more devices. Beveled corners prevent the clamp screws from protruding into the back wall. With non-metallic sheathed cable clamps. Acceptable for use in 2 hrs fire rated walls. Four cable knockouts (end). Two 1/2 in conduit knockouts (end). 1/2 in conduit knockouts (bottom). With leveling bumps. No plaster ears, not suitable for old work. 2-1/4 in D. 10.5 cu-in. UL listed.
$2.59

RACO 509 Switch Box, 1-Gang, 1-Outlet, 4-Knockout, 1/2 in Knockout, Steel, Gray, Galvanized

Conduit wiring system. Gangable switch box offers the option of constructing a box to hold two or more devices. Adjustable plaster ears allow box to be used in old work applications. Provided old work clips on side of box eliminates the need for additional box supports to secure box in wall opening. Two 1/2 in bottom knockouts and two 1/2 in end knockouts. 2-1/2 in deep, 12.5 cu-in. UL listed.
$8.69

RACO 518/8518 Switch Box, 1-Gang, 5-Knockout, 1/2 in Knockout, Steel, Gray, Galvanized, Screw Mounting

One 1/2 in bottom conduit knockout, four bottom cable knockouts. With armored cable/metal clad/flex clamps. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2 hrs rated walls. 2-1/2 in D. 12.5 cu-in. UL listed. UPC bar coded.
$3.79

RACO 519 Switch Box, 1-Gang, 5-Knockout, 1/2 in Knockout, Steel, Gray, Galvanized

Four cable knockouts (end). One 1/2 in conduit knockout (bottom). With clamps for non-metallic sheathed cable. 3 in x 2 in x 2-1/2 in D. 12.5 cu-in. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2 hrs rated fire walls.
$2.79

RACO 522 Switch Box, 1-Gang, 1-Outlet, 3-Knockout, 1/2 in Knockout, Steel, Gray, Galvanized

Four cable knockouts (end). Two 1/2 in conduit knockouts (end). One 1/2 in conduit knockout (bottom). With armored cable/metal clad/flex clamps. "LB" bracket for wood studs, with 5/8 in setback, no plaster ears. Acceptable for use in 2 hrs rated walls. 2-1/2 in D. 12.5 cu-in. UL 514-A listed, File E195978. UPC bar coded.
$4.79

RACO 523 Switch Box, 1-Gang, 1-Outlet, 1-Knockout, 1/2 in Knockout, Steel, Gray, Galvanized

One 1/2 in bottom knockout. Four cable knockouts. 2-1/2 in D x 12.5 cu-in. Armored cable/metal clad/flex clamps. Old work clips on side of box eliminates the need for additional box supports to secure box in wall opening. Acceptable for use in 2 hrs rated walls. UL listed. UPC bar coded.
$4.79

RACO 528 Switch Box, 1-Gang, 1-Outlet, 7-Knockout, 1/2 in Knockout, Steel, Gray, Galvanized, Bracket Mounting

Four cable knockouts (end). Two 1/2 in conduit knockouts (end). One 1/2 in conduit knockout (bottom). With non-metallic sheathed cable clamps. Leveling bumps. Less ears. 3 in x 2 in x 2-1/2 in D. 12.5 cu-in. Acceptable for use in 2 hrs rated fire walls. UL listed.
$2.59

RACO 529 Switch Box, 1-Gang, 1-Outlet, 3-Knockout, 1/2 in Knockout, Steel, Gray, Galvanized

Four cable knockouts (end). Two 1/2 in conduit knockouts (end). One 1/2 in conduit knockout (bottom). "LB" bracket for wood studs, 5/8 in offset to clear narrow door molding. Face mounts on front edge of wood stud. Use when space between studs is limited. With clamps for non-metallic sheathed cable. 3 in x 2 in x 2-1/2 in D. 12.5 cu-in. UL listed.
$3.79

RACO 545 Switch Box, 1-Gang, 1-Outlet, 2-Knockout, 1/2 in Knockout, Steel, Gray, Galvanized, Screw Mounting

Four cable knockouts (end). Two 1/2 in knockouts (end). With NMSC, non-metallic sheathed cable clamps. Old work clip. 3 in x 2 in x 2-1/2 in D, 12.5 cu-in. Acceptable for use in 2 hrs rated fire walls. UL listed.
$3.99

RACO 560 Switch Box, 1-Gang, 1-Outlet, 8-Knockout, 1/2 in Knockout, Steel, Gray, Galvanized, Thread Mounting

For conduit. 3 in x 2 in switch box. No bracket, adjustable plaster ears allow box to be used in old work applications. 14 cu-in capacity, 2-3/4 in deep, four 1/2 in side knockouts, two 1/2 in bottom knockouts and two 1/2 in end knockouts. Acceptable for use in 2 hrs rated fire walls. UL listed.
$2.99

RACO 567 Switch Box, 1-Gang, 1-Outlet, 7-Knockout, 1/2 in Knockout, Steel, Gray, Galvanized

Four 1/2 in conduit knockouts (sides). Four cable knockouts (end). Two 1/2 in conduit knockouts (end). One 1/2 in conduit knockout (bottom). With non-metallic sheathed cable clamps. 3 in x 2 in x 2-3/4 in D. 14 cu-in. Acceptable for use in 2 hrs rated fire walls. UL listed.
$3.29

RACO 680 Switch Box, 2-Gang, 2-Outlet, 17-Knockout, 1/2 in Knockout, Steel, Gray, Galvanized, Screw Mounting

Four inch square, drawn metal box, suitable for use in 2 hrs fire rated walls. Conduit wiring system. Twelve 1/2 in conduit knockouts (sides). Five 1/2 in conduit knockouts (bottom). 2-1/8 in D, 30.3 cu-in. UL listed.
$5.99

RACO 8189 Ceiling Outlet Box, 2-Gang, 16-Knockout, Steel, Gray

Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in pre-galvanized steel. 8-32 cover mounting screws assembled.
$1.49

RACO 8265 Ceiling Outlet Box, 2-Gang, 12-Knockout, Steel, Gray

Conduit wiring system. Welded, with conduit knockouts. Four 3/4 in and four 1 in conduit knockouts (sides). One 1/2 in conduit knockout and three TKOs (bottom). 4-11/16 in square x 2-1/8 in D. 42 cu-in. Installed in ceilings or walls for lighting fixtures or receptacles. UPC code. UL listed.
$5.69

RACO 8355 Switch Box, 1-Gang, 1-Outlet, 1-Knockout, 1/2 in Knockout, Steel, Gray, Galvanized

Four cable knockouts (ends). One 1/2 in conduit knockout (bottom). With clamps for non-metallic sheathed cable. "S" backset. Mounting guides set 3/8 in, with bumps. Angle nail type. 3 in x 2 in x 2-27/32 in deep, 15.8 cu-in capacity. Prepositioned mounting nails included. Acceptable for use in 2 hrs rated walls. UL listed.
$2.99

RACO 8500 Switch Box, 1-Gang, 8-Knockout, 1/2 in Knockout, Steel, Gray

Conduit wiring system. Four 1/2 in conduit knockouts (sides). Two 1/2 in conduit knockouts (end). Two 1/2 in conduit knockouts (bottom). Less clamps. 3 in x 2 in x 2-1/2 in D. 12.5 cu-in. Acceptable for use in 2 hrs rated fire walls. UL listed.
$2.59

RACO 8524 Switch Box, 1-Gang, 3-Knockout, Steel, Aqua/Red, Bracket Mounting

One 1/2 in bottom and two 1/2 in end conduit knockouts and four cable knockouts. With armored cable/metal clad/flex clamps. TS brackets for wood or metal studs, with 1/2 in setback. Gauging tabs and recessed nailing spur, less ears. Acceptable for use in 2 hrs rated walls. 2-1/2 in D. 12.5 cu-in. UL listed. UPC bar coded.
$3.49
;