Taps, Dies & Extractors

View as Grid List
Sort by
Display per page
Filter by attributes

Harvey 016100 Thread Cutting Oil, Clear, 1 qt Bottle

Harvey™ lubricants are a great quality cutting oil formulated to extend the life of hand tools and pipe threading machines.
$15.99

IRWIN 12001ZR Tap Wrench, Steel

Designed for use with taps and on many other tools to be turned by hand. Easy adjustment and tightening quick turn. Additional holding jaws are recessed inside hole for gripping onto smaller sized taps. T-handle extends full length in either direction for more leverage.
$10.99

IRWIN 12002 Tap Wrench, Steel

Designed for use with taps and on many other tools to be turned by hand. Easy adjustment and tightening quick turn. Additional holding jaws are recessed inside hole for gripping onto smaller sized taps. T-handle extends full length in either direction for more leverage.
$15.99

IRWIN 12008 Die Stock Handle, 1 in Die, Hexagon, Round Die, Plain-Grip Handle

Dies easily lock into position with set screw. Solid construction for long life.
$11.99

IRWIN 12088 Tap Handle and Reamer Wrench, Steel, 9-1/4 in L

Solid construction for ease of use.
$29.99

IRWIN 1756ZR Thread Tap, 4-Flute, HCS

Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
$11.99

IRWIN 1905P Pipe Taper Tap, 4-Flute, HCS

Cuts internal threads in pipes, tapered at a rate of 3/4 in/ft, nominal size of the tap is that of the pipe fitting being tapped, four flutes. Used in applications such as pipe fittings.
$19.99

IRWIN 53535 Screw Extractor Set, Steel, 5-Piece

For removing broken screws and bolts. Left hand spiral, tapered flute. Correct drill size stamped on each screw extractor. Eliminates redrilling and retapping for a larger screw. Includes EX1, EX2, EX3, EX4 and EX5 in plastic pouch.
$13.99

IRWIN 537 Series 53700 Combo Pack Spiral Extractor and Drill Bit, Steel, 6-Piece

Designed to remove broken studs, bolts, socket screws and fittings. Aggressive left hand spiral design for extra gripping power. Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases. Extractor size and recommended drill bit size are etched on each tool. High-speed steel drill bit ensures fast, clean drilling. Set includes spiral flute screw extractors of size EX-1, EX-2, EX-3 and HSS drill bits of size 5/64 in, 7/64 in and 5/32 in. Comes with vinyl pouch.
$16.99

IRWIN 8012 Machine Screw Tap, 3-Flute, HCS

Straight flutes are ground to provide rapid chip removal for efficient threading, for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
$3.99

IRWIN 80213 Tap and Drill Bit Set, HCS/HSS

Produces a thread that is strong, yet easy to tap. High-speed steel drill bits ensure fast, precise drilling. High-carbon steel plug taps are ideal for general-purpose threading.
$6.49

IRWIN 80217 Tap and Drill Bit Set, HCS/HSS

Produces a thread that is strong, yet easy to tap. High-speed steel drill bits ensure fast, precise drilling. High-carbon steel plug taps are ideal for general-purpose threading.
$7.99

IRWIN 80220 Tap and Drill Bit Set, HCS

Produces a thread that is strong, yet easy to tap. High-speed steel drill bits ensure fast, precise drilling. High-carbon steel plug taps are ideal for general-purpose threading.
$7.99

IRWIN 80221 Tap and Drill Bit Set, HCS/HSS

Produces a thread that is strong, yet easy to tap. High-speed steel drill bits ensure fast, precise drilling. High-carbon steel plug taps are ideal for general-purpose threading.
$7.99

IRWIN 80222 Tap and Drill Bit Set, HCS/HSS

Produces a thread that is strong, yet easy to tap. High-speed steel drill bits ensure fast, precise drilling. High-carbon steel plug taps are ideal for general-purpose threading.
$8.99

IRWIN 80230 Tap and Drill Bit Set, HCS/HSS

Produces a thread that is strong, yet easy to tap. High-speed steel drill bits ensure fast, precise drilling. High-carbon steel plug taps are ideal for general-purpose threading.
$7.99

IRWIN 80235 Tap and Drill Bit Set, HCS/HSS

Produces a thread that is strong, yet easy to tap. High-speed steel drill bits ensure fast, precise drilling. High-carbon steel plug taps are ideal for general-purpose threading.
$10.99

IRWIN 80238 Tap and Drill Bit Set, HCS/HSS

Produces a thread that is strong, yet easy to tap. High-speed steel drill bits ensure fast, precise drilling. High-carbon steel plug taps are ideal for general-purpose threading.
$11.99

IRWIN 8032 Machine Screw Tap, 4-Flute, HCS

Straight flutes are ground to provide rapid chip removal for efficient threading, for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
$4.59

IRWIN 8123 Fractional Tap, 4-Flute, HCS

Four straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
$4.59

IRWIN 8136 Fractional Tap, 4-Flute, HCS

Four straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
$6.49

IRWIN 8139 Fractional Tap, 4-Flute, HCS

Four straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
$6.99

IRWIN 8140 Fractional Tap, 4-Flute, HCS

Four straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
$6.99

IRWIN 8145 Fractional Tap, 4-Flute, HCS

Four straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
$7.99

IRWIN 8202 Pipe Taper Tap, 4-Flute, HCS

Cuts internal threads in pipes, tapered at a rate of 3/4 in/ft, nominal size of the tap is that of the pipe fitting being tapped, four flutes. Used in applications such as pipe fittings.
$6.99

IRWIN 8203 Pipe Taper Tap, 4-Flute, HCS

Cuts internal threads in pipes, tapered at a rate of 3/4 in/ft, nominal size of the tap is that of the pipe fitting being tapped, four flutes. Used in applications such as pipe fittings.
$8.69

IRWIN 8317 Thread Tap, 4-Flute, HCS

Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
$4.99

IRWIN 8318 Thread Tap, 4-Flute, HCS

Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
$4.79

IRWIN 8323 Thread Tap, 4-Flute, HCS

Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
$4.99

IRWIN 8327 Thread Tap, 4-Flute, HCS

Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
$4.99

IRWIN 8335 Thread Tap, 4-Flute, HCS

Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
$6.99

IRWIN 8336 Thread Tap, 4-Flute, HCS

Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
$6.99

IRWIN 8339 Thread Tap, 4-Flute, HCS

Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
$7.59

IRWIN 8341 Thread Tap, 4-Flute, HCS

Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
$7.99

IRWIN 8343 Thread Tap, 4-Flute, HCS

Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
$8.99

IRWIN 9427 Machine Screw Dies, 5/16-18 Thread, NC, Right Hand Thread, HCS

Die can be used with a wrench or socket when space is limited. Recommended for use with hexagon die stock. Used in applications such as maintenance and repair work.
$7.59

IRWIN 9434 Machine Screw Dies, 3/8-16 Thread, NC, Right Hand Thread, HCS

Die can be used with a wrench or socket when space is limited. Recommended for use with hexagon die stock. Used in applications such as maintenance and repair work.
$7.59

IRWIN 9439 Machine Screw Dies, 7/16-14 Thread, NC, Right Hand Thread, HCS

Die can be used with a wrench or socket when space is limited. Recommended for use with hexagon die stock. Used in applications such as maintenance and repair work.
$7.99

IRWIN 9444 Machine Screw Dies, 1/2-13 Thread, NC, Right Hand Thread, HCS

Die can be used with a wrench or socket when space is limited. Recommended for use with hexagon die stock. Used in applications such as maintenance and repair work.
$7.59

IRWIN 9727 Metric Dies, M6-1 Thread, Fine, Right Hand, HCS

Ideal for automotive repair and machinery where metric threads are specified.
$7.99