Water Heater Parts & Accessories

View as Grid List
Sort by
Display per page
Filter by attributes

CAMCO 06902 Gasket

1/16 in Thick (Bulk).
$1.19

CAMCO 09953 Professional Bilingual Element Socket, Chrome Finish, For 1/2 in Socket Drive

Fits standard 1/2 in socket drive to replace screw-in water heater elements.
$15.99

CAMCO 10183 Connector Kit, Copper

The copper connector kit is designed for use with gas systems. The connecting kit is used where cold supply or hot distribution lines are 3/4 in copper and not threaded. The kit includes two 3/4 in NPT x 2 in dielectric nipples, two 3/4 in x 15 in flexible water connectors, one roll of Teflon tape, two 3/4 in NPT compression adapters and one 1/2 in x 24 in stainless steel gas connector.
$39.99

CAMCO 10193 Connector Kit, Copper

The copper connector kit is designed for use with gas or electric systems. The connecting kit is used where cold supply or hot distribution lines are 3/4 in copper and not threaded. The kit includes two 3/4 in NPT x 2 in dielectric nipples, two 3/4 in x 15 in flexible water connectors, one roll of Teflon tape, two 3/4 in NPT compression adapters and one 1/2 in x 24 in stainless steel gas connector. Can be used on gas or electric water heaters, this installation kit contains 2-3/4 in iron pipe size x 2 in dielectric nipples, two 3/4 in x 15 in flexible water connectors, one roll Teflon tape, 2-3/4 in MPT compression adapters.
$24.99

CAMCO 10862 Bilingual Run-Off Tube, Thermoplastic Polypropylene

The CAMCO side mount run-off tube carries water steams safely to the drain pan or drain, if T and P valve activates. Thermoplastic polypropylene run-off tubes present a rigid surface for gripping with standard wrenches and can be cut to length.
$5.99

CAMCO 11061 Flare Dip Tube with Gasket, PEX

The CAMCO flared dip tube is a non-metallic tube that directs incoming cold water to the bottom of the tank and can be cut to length.
$4.29

CAMCO 11231 Water Heater Stand Kit, Steel, For 50 gal Residential Water Heaters

Places gas water heaters 18 in above floor as required by the National Fuel Gas and Plumbing Codes. Galvanized sheet metal of 18 ga thick holds up to 50 gal water heaters. Many local building codes require a water heater stand for gas water heaters located in areas where the accumulation of combustible fumes may occur.
$55.99

CAMCO 11260 Recyclable Drain Pan, Plastic, For Electric Water Heaters

For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
$8.99

CAMCO 11360 Recyclable Drain Pan, Plastic, For Electric Water Heaters

For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
$11.99

CAMCO 11400 Recyclable Drain Pan, Plastic, For Electric Water Heaters

For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
$11.99

CAMCO 11430 Recyclable Water Heater Drain Pan, Aluminum

This wall-mount, aluminum tankless drain pan is designed to fit underneath most whole house tankless water heaters providing both water damage protection and flushing maintenance convenience. These aluminum pans will not rust, corrode or crack and may be used for gas or electric water heaters.
$55.99

CAMCO 11460 Recyclable Drain Pan, Plastic, For Electric Water Heaters

For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
$10.99

CAMCO 11470 Recyclable Water Heater Drain Pan, Plastic

The tankless drain pan is designed to fit underneath most whole house tankless water heaters providing both water damage protection and flushing maintenance convenience. The pans are injection molded to give them great strength and durability.
$39.99

CAMCO 11523 Water Heater Drain Valve, Plastic

CAMCO 11523 3/4 in plastic water heater drain valve features an all plastic valve that fits directly into water heater for easy draining. 3/4 in pipe thread x 3/4 in male hose thread.
$3.79

CAMCO 20800 Recyclable Drain Pan, Aluminum, For Gas or Electric Water Heaters

For gas or electric water heaters. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
$16.99

CAMCO 20810 Recyclable Drain Pan, Aluminum, For Gas or Electric Water Heaters

For gas or electric water heaters. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
$21.99

CAMCO 20830 Recyclable Drain Pan, Aluminum, For Gas or Electric Water Heaters

For gas or electric water heaters. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
$19.99

CAMCO 20840 Recyclable Drain Pan, Aluminum, For Gas or Electric Water Heaters

For gas or electric water heaters. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
$17.99

CAMCO 20860 Recyclable Drain Pan, Aluminum, For Gas or Electric Water Heaters

For gas or electric water heaters. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
$27.99

CAMCO 20868 Recyclable Water Heater Drain Pan, Aluminum, For Gas or Electric Water Heaters

The CAMCO aluminum water heater drain pan has a 32 in I.D and fits underneath gas or electric water heaters to help collect and drain off leaking water. The aluminum pan will not rust or crack and it has a pre-cut hole for the included PVC fitting.
$32.99

Danco 65884B Supply Line Washer, Rubber, Black

Designed to be used with a 3/4 in Dia supply connector to seal the connection. Size of 13/16 x 1 in.
$1.39

Danco 88493 Supply Line Washer, Rubber, Black

Water heater supply line washer.
$2.79

EASTMAN 60022/DET-5 Thermal Expansion Tank, Steel

Used on gas, oil or electric, direct-fired, residential water heater and hot water storage tank applications to absorb the increased volume of water created by thermal expansion. It also maintains balanced pressure throughout the water supply system by keeping system pressure below the T&P relief valve setting. It is a pre-pressurized, field-adjustable steel tank with an FDA-approved Butyl rubber diaphragm and brass 3/4 in (20 mm) inlet connection. An expansion membrane prevents air-to-water contact in the tank ensuring a long system life. IAMPO listed and ANSI/NSF 61 certified. Maximum pressure 150psi (10 bar).
$29.99

EASTMAN 60023/DET-12 Thermal Expansion Tank, Steel

Used on gas, oil or electric, direct-fired, residential water heater and hot water storage tank applications to absorb the increased volume of water created by thermal expansion. It also maintains balanced pressure throughout the water supply system by keeping system pressure below the T&P relief valve setting. It is a pre-pressurized, field-adjustable steel tank with an FDA-approved Butyl rubber diaphragm and brass 3/4 in (20 mm) inlet connection. An expansion membrane prevents air-to-water contact in the tank ensuring a long system life. IAMPO listed and ANSI/NSF 61 certified. Maximum pressure 150psi (10 bar).
$57.99

Honeywell CQ200A Pilot Thermopile Generator, 35 in Lead

Honeywell Thermopile Generator, Pilot, Series: CQ200A, 35 in Lead Length, 750 mV Open Circuit Output, Push In Clip Connection
$64.99

Mueller ProLine 102-816 Heavy-Duty Water Heater Drain Valve, Brass

1-1/4 in shank length. Heavy brass construction. Neoprene seal disc. 3/4 in hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7.
$8.99

Quick R B5-69 Insulation Jacket, For Insulating 60 gal Tank

Reduces heat loss from water tank. R value equals 6.7. Will insulate up to a 60 gal tank. 2 in x 48 in x 75 in blanket per bag.
$22.99

Richmond RP20063 Water Heater Gasket Kit, For Rheem, Richmond, Ruud, GE FVIR Water Heaters

Contains everything that you need to replace the thermocouple and burner gasket on your Richmond FVIR gas water heater. The kit is required anytime the burner door is removed from the unit so that the gasket can be replaced. Kit ensures safe and reliable operation. Kit includes Burner door gasket, tinnerman clips, screws, torx head driver and instructions. For use on Richmond, Rheem, Ruud and GE FVIR water heaters. Genuine OEM replacement part.
$21.99

Richmond RP20064 Thermocouple Gasket Kit, For Richmond, Rheem, Ruud and GE FVIR Water Heaters

Contains everything that you need to replace the thermocouple and burner gasket on your Richmond FVIR gas water heater. The kit is required anytime the burner door is removed from the unit so that the gasket can be replaced. Kit ensures safe and reliable operation. Kit includes 24 in thermocouple, burner door gasket, Tinnerman?? clips, screws, Torx head driver and instructions. For use on Richmond, Rheem, Ruud and GE FVIR water heaters. Genuine OEM replacement part.
$22.99

Richmond RTG20220AB Tankless Service Valve Kit, Brass

Supply and service valve kit for use with a tankless gas water heater installation. Clean brass meets the strictest Low lead code requirements. Provides an easy way to flush and service your new tankless water heater. Hot and cold installation and service valves. Includes relief valve and unions. Clean brass for low lead codes. Makes it easy for future service and flushing of tankless water heaters.
$99.99

SharkBite 22441LF Push-Fit Water Heater Installation Kit, Brass

SharkBite 22441LF water heater kit 3/4 in FNPT x 3/4 in the SharkBite water heater kit is designed to simplify water heater installation. The kit features special push-fit fittings that allow the user to connect a water distribution pipe with ease. This product is lead free.
$22.99

SharkBite 22604LF Push-Fit Water Heater Installation Kit, Brass

SharkBite 22604LF water heater kit 1/2 in FNPT x 3/4 in the SharkBite water heater kit is designed to simplify water heater installation. The kit features special push-fit fittings that allow the user to connect a water distribution pipe with ease. This product is lead free.
$22.99

Watts 3/4 LF1170M2-UT Temperature Control Valve, Copper Silicon Alloy, For Water Heating Equipment

This 3/4 in lead-free hot water control valve is designed for installation on water heating equipment to provide tempered water to point-of-use fixtures and is ideal for radiant heat applications. The double throttling design combines hot and cold water control for a sensitive response to water temperature changes in the mixing chamber. It consists of a lead-free brass body, threaded union connections, solid wax hydraulic principle thermostat, integral filter washers and check valves, virtual shutoff upon loss of cold water supply and a locking mechanism for the temperature setting. The maximum pressure is 150 psi. The adjustable field range temperature is 90 to 160 deg F.
$139.99

Watts LF70A-F Hot Water Extender Tempering Valve, Bronze Finish, Brass, For Domestic Water Supply Systems

This 1/2 in hot water extender tempering valve is designed for domestic water supply systems and recommended for tankless heater, water heater and solar applications installed at or near the boiler or hot water heater. It consists of a lead-free brass body, solder connections, thermostat, stainless steel springs and dial adjustment cap. The hydraulically operated thermostat opens a spring loaded check in the cold water inlet which allows cold and hot water to mix and can be replaced as a unit. The temperature range is 120 to 160 deg F.
$119.99

Watts LFN36 0951263 Vacuum Relief Valve, Brass

This 1/2 in lead-free vacuum relief valve is suitable for low pressure steam and water service and is ideal for use in domestic water heaters and supply tanks. This valve automatically allows air to enter into the piping system to prevent vacuum conditions that could siphon water from the system and damage water equipment. It consists of a lead-free body construction with NPT male inlet connection and a protective cap. The maximum working pressure is 200 psi.
$45.99
;