Window Operators

View as Grid List
Sort by
Display per page

AmesburyTruth TH 23076 Window Operator, Left, Zinc

TH 23076 is a left handed dual arm operator with a 4-1/16 in offset (up) link arm. The long continuous arm and the jointed arm create an action that pushes the sash open while pulling the hinge side of sash to the open position. This is the mechanism only - no cover or crank handle included (optional). The heavy-duty die-cast zinc operator base, worm drive, gears as well as the steel arms and stud bracket are protected with the corrosive-resistant E-Gard™ coating process.
$34.99

AmesburyTruth TH 23077 Window Operator, Right, Zinc

TH 23077 is a right handed dual arm operator with a 4-1/16 in offset (up) link arm. The long continuous arm and the jointed arm create an action that pushes the sash open while pulling the hinge side of sash to the open position. This is the mechanism only - no cover or crank handle included (optional). The heavy-duty die-cast zinc operator base, worm drive, gears as well as the steel arms and stud bracket are protected with the corrosive-resistant E-Gard™ coating process.
$35.99

Prime-Line H 3710 Window Operator, Left, Powder-Coated

The H 3710 casement window operator is a left hand white square body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 3/8 in crank spindle. The matching crank handle that fits onto the crank spindle and installation screws are included. Mounting holes available are 3-7/8 and 4-3/4 in apart.
$19.99

Prime-Line H 3711 Window Operator, Right, Powder-Coated

The H 3711 casement window operator is a right hand white square body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 3/8 in crank spindle. The matching crank handle that fits onto the crank spindle and installation screws are included. Mounting holes available are 3-7/8 and 4-3/4 in apart.
$19.99

Prime-Line TH 23020 Window Operator, Left, Zinc, Bronze

Replacing the old Truth EntryGard Series the TH 23020 is a left handed, 9-1/2 in single arm operator with a baked enamel bronze finish. It is made of heavy-duty die-cast zinc. The steel arm, worm drive and gears are protected with a corrosive-resistant finish and it opens to a full 90 deg. The plastic roller on the end of the arm insure a smooth operation as it slides through the TH 22397 track. When installing, the housing easily fastens down to the window sill.
$35.99
;